Oroquieta Agro-Industrial School is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Oroquieta Agro-Industrial School
Address: Purok 3, Villaflor, Oroquieta City, Misamis Occidental, Philippines
Telephone Number: (088) 531-2122; 531-2111
Oroquieta Agro-Industrial School was established in Barangay Clarin Settlement, Oroquieta City in 1971 by virtue of RA 4941. The school is authorized to offer both secondary and post-secondary courses in industrial and trade technologies. Post-secondary course in agricultural technology was offered in 1975 and trade technology courses were offered in 1980 at Villaflor campus, Oroquieta City. The growth and development of the school was hampered in 1982-1989 because of the peace and order conditions in the area. It was for this reason, that the seat of administration was moved to Barangay Villaflor where trade clustered courses were offered.
Its location now Villaflor, Oroquieta City has been favorable and advantageous for many students who seek for affordable Technical Education. Students from different places of Oroquieta City and neighboring towns can now avail on low-cost quality Technical Education with special emphasis on Automotive, Electrical, Electronics, Garment & Technology. Indeed, Oroquieta City Agro-Industrial School (OASIS) has been contributing a lot for the solution of educating the poor, but deserving students within the service area of the school.
TESDA brings to OASIS a new hope for its vision for Center of Excellence, in agricultural production, and training of middle-level manpower, a new challenge with the assurance for a sustainable technical vocational education and training to produce globally competitive workforce.
In responding to government priority program thrust, and in compliance with the provision of the Agriculture and Fishery Modernization Act of 1997, the school has been working out development in improving crop and animal production to support the food security program of the government. Goat raising, swine and poultry production are the flagship projects of the school. This is probably one of the major contributions of OASIS in its quest as a center of excellence in food production. Agro-forestry project is now in the process of development in addition to the existing orchard and forest tree farms. The site of the agro-forestry project has been considered as a mini-jungle forest where species of trees for lumber are found. Preservation of several forest trees has been one of the concerns of OASIS to conserve the flora and fauna in the area. Eco-tourism project was started to develop in the mini-forest to attract local and foreign environmentalists and tourists.
Oasis is now leading its way towards a better future. A brighter tomorrow when people find no room for destiny to be shaped not by chance, but by choice. No matter how hard would it be to realize the dream, just like a tree that can not easily be uprooted by strong wind and rain, OASIS becomes strong and determined to go on since it is deeply anchored by TESDA’s vision and mission.
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in “Oroquieta Agro-Industrial School” in the Province of Misamis Occidental.
List of Tesda Courses Offered / Registered Programs
Course Authorized | Duration |
---|---|
Production of High-Quality Inbred Rice, and Seed Certification and Farm Mechanization | 96 hours |
Food Processing NC II | 1,022 hours |
Driving NC II | 120 hours |
Shielded Metal Arc Welding (SMAW) NC I | 268 hours |
Trainers Methodology Level I | 264 hours |
Shielded Metal Arc Welding (SMAW) NC II | 268 hours |
Beauty Care Services (Nail Care) NC II | 216 hours |
Dressmaking NC II | 240 hours |
Cookery NC II | 316 hours |
Automotive Servicing NC II | 676 hours |
Animal Production (Swine) NC II | 306 hours |
Animal Production (Poultry-Chicken) NC II | 226 hours |
Electronics Products Assembly and Servicing NC II | 260 hours |
Organic Agriculture Production NC II | 232 hours |
Rubber Production NC II | 322 hours |
Animal Production (Ruminants) NC II | 306 hours |
Horticulture NC III | 445 hours |
Electrical Installation and Maintenance NC II | 196 hours |
Certificate in Animal Production (Bundled Qualifications in Animal Production (Poultry-Chicken) NC II, Animal Production-Swine NC II and Animal Production-Ruminants NC II) | 838 hours |
Certificate in Agricultural Crops (Bundled Qualifications in Organic Agriculture Production NC II and Rubber Production NC II) | 554 hours |
Certificate in Tourism and Food Technology (Bundled Qualifications in Cookery NC II and Food Processing NC II) | 884 hours |
Certificate in Electronics and Land Transport Technology (Bundled Qualifications in Electronics Products Assembly and Servicing NC II and Driving NC II) | 378 hours |
Certificate in Automotive Servicing Technology (Bundled Qualifications in Automotive Servicing NC I and NC II, Driving NC II) | 950 hours |
Certificate in Dressmaking and Beauty Care (Nail Care) (Bundled Qualifications in Beauty Care (Nail Care) Services NC II and Dressmaking NC II) | 456 hours |
Certificate in Construction Trade (Bundled Qualifications in Carpentry NC II and Masonry NC II) | 420 hours |
Masonry NC II | 181 hours |
Carpentry NC II | 301 hours |
Massage Therapy NC II | 700 hours |
Barangay Health Services NC II with Contact Tracing Level II | 535 hours |
Contact Tracing Level II | 120 hours |
Automotive Servicing NC I | 469 hours |
Pipefitting (Metallic) NC II | 221 hours |
Computer-based English Proficiency (100 hours) – No Training Regulation | 100 hours |
Cookery NC II – Mobile Training Program | 316 hours |
Food Processing NC II – Mobile Training Program | 552 hours |
Organic Agriculture Production NC II – Mobile Training Program | 232 hours |
Carpentry NC II – Mobile Training Program | 301 hours |
Animal Production (Swine) NC II – Mobile Training Program | 306 hours |
Pipefitting (Metallic) NC II – Mobile Training Program | 221 hours |
Dressmaking NC II – Mobile Training Program | 240 hours |
Animal Production (Poultry-Chicken) NC II – Mobile Training Program | 226 hours |
Masonry NC II – Mobile Training Program | 181 hours |
Basic Requirements for TESDA Courses:
- At least 18 years of age
- At least High School Graduate
- Copy of NSO Birth Certificate
- With good moral character
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school directly at telephone number (088) 531-2122; 531-2111. You can also visit Oroquieta Agro-Industrial School. The assessment center is located at Purok 3, Villaflor, Oroquieta City, Misamis Occidental, Philippines.
Good day po. Meron po ba kayo pwede ibigay na contact kasi po interested po ako about dressmaking/garments, nail care at massage therapy. Inquire po Sana muna ako for details before mag enroll to any course offered po. Thank you.
Good pm Po ma’am / sir kanus a inyong enrollment? Plano onta ko pa enroll Driving. Thank you
Hello ma’am sir naay plamber NCII PILA KA WEEKS?MAKUHA
Sir pwedi mag tanong. Mag renew po ako ng certificate NCI NCII ko po. Ano po ba ang requirements sir?
Pwed po ba maka hinge cp number marami po ako gusto inquire tungkol sa tesda training animal production ruminants
Good day Maam/Sir!
Pila ka days ang Teaching Methodology level 2?
Looking forward to hear from you soonest!
Thank you.
Sir/mam pwdi po ba kahit nasa mahigit 45 na ang edad mag enroll NG smaw NC11
klan po mag start ang classes sa Computer Hardware Servecing NCII?
Maam / Sir hello po .. Magtatanong po sana ako kung magkano po ang tuition sa SMAW NC II ,kung may scholarship po kau at kung pwedi po mag avail and How to avail po?
sir/maam good day po ask kulang if makakahabol pa po ba ako sa computer hardware NCII
kailan po ba ang enrollment
saka libre po ba ito?
ano po ang schedule ng klase?
kailan po umpisa ng massage therapy ? atmagkano po ang bayad.
Sir/Maam, available po ba ang animal production nc2 ?
Sir GOOD DAY.! Mayron po akong tanong, magkano po ang bayad sa animal production nc2 ? Every day ba ang pasok sir ? Thankyou sir.