Tesda Courses in Regional Training Center Baguio City

Regional Training Center Baguio City is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Regional Training Center Baguio City

Address: 133 Magsaysay Drive, Loakan Road, Baguio City, Philippines
Telephone Number: (074) 424-8723 / 8724(074) 424-8723, 424-8724

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in Regional Training Center Baguio City in the province of Benguet.

Driving (Passenger Bus/Straight Truck) NC III n/atr> HEO (Rigid Off-Highway Dump Truck) NC IIn/a

List of Tesda Courses Offered / Registered Programs Duration
Aerospace and Industrial Manufacturing Technology 1,340 hours
Automotive Servicing NC I 469 hours
Automotive Servicing NC II 676 hours
Carpentry NC II 162 Hours
Carpentry NC III 364 hours
Certificate in Automotive Services (Bundled Qualifications in Automotive Servicing NC I and Automotive Servicing NC II) 832 hours
Certificate in Carpentry and Building Electrician Services (Bundled Qualifications in Carpentry NC II, Electrical and Installation and Maintenance NC II) 316 hours
Certificate in CNC Lathe, Milling and Machining Operation (Bundled Program Qualification in Machining NC II, CNC Lathe Machine Operation NC II and CNC Milling Machine Operation NC II) 807 hours
Certificate in Electrical Technician (Bundled Program Qualification in Electrical Installation and Maintenance NC II and EIM NC III) 592 hours
Certificate in Mechanical Technology (Bundled Program Qualification in SMAW NC II, Automotive Servicing NC II, Machining NC II, CNC Lathe Machine Operation NC II) 1,517 hours
Certificate in Shielded Metal and Gas Tungsten Arc Welding Services (Bundled Program Qualification in SMAW NC II and GTAW NC II) 536 hours
Certificate in Welding and Machining Services (Bundled Program Qualification in SMAW NC II and Machining NC II) 605 hours
Certificate in Welding Technician (Bundled Program Qualification in SMAW NC II, GMAW NC II, GTAW NC II) 804 hours
CNC Lathe Machine Operation NC II 236 hours
CNC Lathe Machine Operation NC III 234 Hours
CNC Milling Operation NC II 234 Hours
CNC Milling Operation NC III 234 Hours
Construction Painting NC II 178 Hours
Contact Tracing Level II 120 hours
Driving NC II 118 Hours
Electrical Installation and Maintenance NC II 196 hours
Electronics Products Assembly and Servicing NC II 260 hours
English Proficiency Training Program 100 Hours
Gas Metal Arc Welding (GMAW) NC II 268 Hours
Gas Tungsten Arc Welding (GTAW) NC II 268 hours
Machining NC II 337 Hours
Machining NC III 342 Hours
Masonry and Tile Settling Services (Bundled Program Qualifcation in Masonry NC II and Tile Settling NC II) 340 hours
Masonry NC I 123 Hours
Masonry NC II 258 Hours
Painting and Tile Settling Services (Bundled Program Qualification in Painting NC II and Electrical Installation and Maintenance NC II) 374 hours
Plant Crops 141 hours
Shielded Metal Arc Welding (SMAW) NC I 268 Hours
Shielded Metal Arc Welding (SMAW) NC II 268 Hours
Technical Drafting NC II 246 hours
Tile Setting NC II 82 Hours
Trainers MethodologyLevel I 264 hours

Basic Requirements for TESDA Courses:

  • At least 15 years of age
  • Copy of NSO Birth Certificate
  • Certificate of Good Moral Character from last school attended.
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number (074) 424-8723 / 8724(074) 424-8723, 424-8724. You can also visit Regional Training Center Baguio City. The assessment center is located at Loakan, Baguio City, Philippines.


166 Comments

Add a Comment
  1. Avatar

    Hello just want to ask how much will I pay if I take the lathe machine or the fcaw training. Do u have any cp no.tnx

    1. hello how many months and how much po and certificate in mechanical technology. Thank you

  2. Avatar

    hello! i just want to know how much will i pay if take the korean language ang culture? do you have a cellphone number?

    1. Avatar

      Hello do you offer caregiving course? Where to enroll po if ever and when .thanks

    2. Good day !
      Im jona cantre 46 yrs old..
      Im looking for a job,
      I was a cleck, front desk officer, liason officer and document officer before at standard culinary training center that been accredited of TESDA CAVITE…
      Im very willing to work hard in any particular training centers in Baguio..

      1. Hi Jona. Are you willing to work as a stay in to manage my 2 room airbnb and 1 bedroom home? Call me at zero nine one eight 9 eight five 6 three four zero. Joe

  3. hi.. Im looking up to automotive servicing ncII course and I just want to inquire on all the needed requirements and total costs of the duration of schooling? i hope to get a prompt reply since im from abrod and this inquiry is for my brother residing in baguio city. Thankyou

  4. Hello mam sir kailan po start ng machining II

  5. what employment after finishing english proficiency training program?

    1. CSR… With computer skill. 😁

  6. I would like to know if you will open a class for troubleshooing?Thank you

  7. How much po payment sa gmaw welding course po tnx po

  8. Can I ask something, what if my NSO birthcertificate is not the same to my local birthcertificate, can I still enroll?

  9. Avatar

    Sir, maam, mai offer po ba kau ng FHW Filipino Household worker Certificate training for Domestic Helpers. I urgently need it .heres my number 09069391169

  10. Avatar

    Sir kailan po training ng Korean languange?

  11. Avatar

    Sir kailan po open ng Korean language?

  12. Avatar

    Ano po ang kailangan kapag nag enroll sa tesda?

    1. Sir,meron ba driving course 15 days at kano po bayad nun for 15 days.tnx

  13. May I ask po if kailan ang zmula ng electrical installation and maintainance nc 11 at english profeciency jn sa tesda baguio at kung my babayaran b?thnx

  14. Inquire ko po kelan start ng clase sa landscape installation and maintenance at magkano po ang babayaran?maraming salamat po

  15. hi i would like to know the requirements in automotive servicing nc111

    1. Hello ma’am/sir I would like to ask if when is the enrollment for this year because I would like to enrol for the CAD you offered and also what is the availability time of this subject?thanks!

  16. Kindly email me po the tuition fee and requirements for Japanese Language since im here in Riyadh and will be finish by next year para po bago umakyat nang Baguio naka prepare na po pati mga requirements salamat po.ill wait po.

  17. Maam/Sir, tanong lng po kung may pipe fitting course na po ba ang TESDA Baguio, inquire lng po nasa Saudi po ako ngaun plan ko mgtraining pag-uwi, kung wala po, mga list nlng po ng mga school n may offering ng pipe fitting thank u po and God bless.

  18. Hi ask ko Lang po Kung pano reservation ng slot for nihonggo language for 2016 at ano po mga requirements..thank you

    1. hello po. nakakuha na po kayo ng schedule for nihongo language. naghahanap dn kasi ako eh..

      1. Please check this link

  19. question po magkano po yung fee for machining at carpentry at may available slots pa po ba?

  20. Sir Magkanu po advance sa tuition ng automotive NC III?

  21. Sir Magkanu po advance sa tuition ng automotive NC III? and when will be the start of classes?

  22. Dear Sir/Ma’am,

    Greetings! Do you have short course for sewing or pillow case making. How about candle making? I am interested to attend a course. Please update me thru my email address. Thank You!

  23. Good day po.im searching household training center.kung mayroon po kayong offer im interested to enroll.please update me by email.salamat po.

  24. Kelan po enrolment ng mechatronics?

  25. Gud am ..my costumer service po kau or housekeeping??asap thank you mgkanu po tuition tnx po

  26. Good day po mam i am ofw from palau.as machinist operator,mam ask lng po qng ano qng pwedeng i alternate course na mas indemand pa sa machinist..kc po gusto q pag uwi q at pagtapos ng contract ko dto mag aaral po ulit aq..ask q lng po qng anung pwede q pang kunin na mas maganda pang course..salamat po

  27. Do you offer dress making or tailoring?

  28. Avatar

    ..halow..ask ko lang po kung meron nang offer na EIM NC III,,thankz,,

  29. Hello. I just want to know if they offer HRM course?

    1. Good day!magkanu po babayaran sa nc2 welding technician smaw?pwede po ba online registration?

  30. Gud am sir magkano po un lathe machine training course?thanks

  31. Hello, i want to ask if theres any computer courses in tesda

  32. hi,kailan po start training ng language courses,may link po sa website?

    1. May responce na po ba ang tesda office sau for any updates,..?

  33. hi po ask ko lang po sana kung kailan pwedeng mag enroll ng baking and pastry at magkano po babayaran… Pakiemail po ako salamat….

  34. Avatar

    hi sir good day

    i am a technician from texas instrument baguio city. may i ask how much will i pay if i take mechatronics servicing NC II please contact on this no. 09996616078.

    regards,
    jonathan de guzman

  35. Avatar

    Sir/Ma’am,

    Good day!

    How much is the tuition fee for Nihongo Language course? I also would like to know the schedules.Thanks.

    Regards,
    Elson John Casuga

  36. May I ask what are the qualifications for us to avail scholarship in TESDA

  37. gandang araw po TESDA, ano pong mga short courses ang available sa inyo ngayong JUNE- JULY 2016?

  38. hello good morning.. kelan po start ng training sa GMAW NCII?

  39. how much po english profiency course? and when ang class this year?

  40. Hello po good pm po .pede pa po ba mag enroll ng Tesda ?
    Gusto ko po sa Beauty Science meron po ba yun ??
    Tnx po

  41. Avatar

    Tanong ko lang po kung meron po ba kayong training ngayon para sa landscape installation and maintenance (softscape) NC II? Thnaks!

  42. Good day! How can I get in touch with tesda’s regional training center here in Baguio? I Have been trying to call the office multiple times but the phone just keeps ringing endlessly and it seems than no one seems to bother picking up the phone. Anyway, I would just like to inquire what foreign languages are available for the free training and if there are any available slots left. If none, when will the next class/batch start? Your response will be much appreciated. Thank You.

  43. How much will it cost me if i will take up GMAW and when will the classes and enrollment start?

  44. when will the enrollment start on machining NC III

  45. sir/ma’am, helo kailan po start nitong ofer na nc2

  46. sir/ma’am,, kailan po start ofer neo nc2?

  47. sir/ma,am magkano po tuition ng electrical installaion and maintenance ncII at kailan po magsisimula

  48. Good Day po, magkanu po tuition sa automotive servicing NC II

  49. hello po magkano po tuition ang Driving NC 11 thank you!

  50. yung 118 hours po ba sa driving ilang araw po at anu ang schedule thank you po and God bless!

  51. hello sir/mam just want to ask if you have any caregiving courses available and if how much will it cost,or any nursing aid courses thank you

  52. when and how po enrollment for front office or any hotel or tourism related courses po.. sa bcsat .. salamat po..

  53. do you have any schedule for next year short courses, such as electrical and welding? thank you…

  54. Greetings!
    Hello Admin,itatanong ko lang po kung magkano ang training fee sa FCAW at GTAW at kung kailan mag start yung training po,maraming salamat po

  55. Kelan po pede mag enroll? GMAW po

  56. hi po. .wla po ba kayong computer hardware servicing NCII?

  57. Sir,/madam.
    Ask ko lang po allowed po bang mag enroll yong mga idad 35 years old upbove sa tesda.

  58. Hi ma’am/sir,
    may night class po ba ng cnc lathe or milling operation nc II?

  59. Avatar

    Hi. I just wanna ask if how much the tuition fees of carpentry?

  60. Good day. I would like to ask about how can i register a language tutorial center to be TESDA accredited. Thank you

  61. Good morning.. Sir / madam,you don’t have caregiver training in your online program?

  62. Hello po. Pwede po ba mag-enroll this 2017? kung pwede po may it course po ba?

  63. hello..jkailan poh next training ng automotive servicing ncII

  64. Mam/sir my offer po b Kyo ng 2 months carpentry

  65. May online course po b para SA caregiving po?

  66. Hi Gud Day Ma’am kailan offer ang CNC Lathe or CNC Milling NC III?
    thank you Po!

  67. Hi ask ko lang po kung magkano nihongo language?

  68. Helo. Is it possible if i enroll without my good moral? since i’m here in Baguio City. My good moral is lost when Typhoon Yolanda hit us in leyte-samar. I would like to enroll CNC. But my problem is my gold moral because i lost it. Thank you. 😊

  69. Greetings
    I would like to ask if you are offering a massage therapist training here in Baguio?
    If yes, may I ask how much and how long?
    Thank you and hope for your response..

  70. Sir/Mam, San po pwede kumuha course for forklift operator dito sa baguio/benguet? Thanks

  71. Good pm sir, ma’am on going pa po ba ang enrollment sa inyo ngaun???

  72. Good day sir/ma’am, my son is interested to enroll automotive serviving NC11, and i would like to ask if he can still enroll this month, thank you very much

  73. My son is also interested to enroll in electrical Installation and maintenenance but he was presently enrolled at Saint Louis University Baguio City morning only. Can he enroll also in the said course . Thanks!

  74. Hi ma’am/sir

    This is Genesis Gamboa of Powerlane resource inc., in clark freeport zone pampanga i would like to inquire for your database of list graduate in Cnc Lathe Machine, Cnc Milling, and also food related course you have maam.

    thank you very much best regard 🙂

  75. Hi Ma’am /Sir

    This is Genesis Gamboa of Powerlane Resources Inc., i would like to inquire for the database of list graduate in Cnc Lathe Mchine, Cnc Milling, Welder and if you have also a Food related course.

    thank you very much and best regards 🙂

  76. Avatar

    Am po m/sir,
    Ask k LNG po kung paano magregister for scholarship ng tesda para po SNA sa course n housekeeping NC2 dito po Baguio city tnx po

  77. I trying to call your number, but is not working? I would like to ask training fee and schedule for scaffolding erector.

  78. Sir/madam kelan po start ng class for building installation nc111.hope for immidiate respond thank you

  79. Helo sir.ask q lng po kng may free schooling po kau ng massage therapy?

  80. Hi,meron po bang automotive electrical assembly offer nyo?
    Salamat

  81. Hi, wanted to ask how much would it cost for a beginner to take your driving course?

  82. hello po meron po ba tayong free training ngaun in any course?thank you

  83. Hi sir/ma’am,

    I just want to inquire if when is the opening for the Wheel loader NC11 or the Dozer NC11? at kung magkano po yung registration?
    Your reply is highly appreciated.
    Salamat po,

  84. hello pow avail po ung CNC lathe machine ilang days po kng sakali

  85. Kailan yun araw ng scaffolding nyo ser

  86. Avatar

    Good pm ma’am/sir tanung ko lang po kung pwede pa mag enroll ng lathe machine at milling machine operation magkano po tuition fee salamat po paki send po ninyo number nyo pa txt nyo po ako 09562644651

  87. Good pm ma’am/ sir, magkano po fee sa driving? Thank you!

  88. hello how much po fee for landscape installation? thank you..

  89. Avatar

    Greetings!
    May I ask if you offer bookkeeping skills training or courses?
    Thank you.

  90. hai good day ask ko lang po kung kelan start ng NIHONGO language

  91. Sir/ma’am
    Gusto ko pong malaman Kong may avelable na course sa house kipping.

  92. Avatar

    hello good afternoon po… how much po tuition fee ng smaw? and kailan po yung Enrollment?

  93. hello po how much po yung tuition fee ng smaw? and kailan po enrollment this 2018?

  94. Halo just want to inquire how much is Machining II for my son

  95. How much is machinery Ii for my son?

  96. Avatar

    Hi po..my schedule po ba kau ng nihonggo language? Magkanu nmn po ang fees? Please reply po about sa details interesado po akong mgaral..salamat..

  97. Hello po! kailan po ang opening ng automotive servicing NC 1? Ilang hours po ito at ilang hours per day? salamat po!

  98. Hi, my schedule na po ba kayo for landscape and maintenance course? How much po?

  99. Hello, I just want to ask if meron po ba kayo cellphone repair NCII training? and How much po and ilang hours po ang training. thank you po.. hoping for your reply.

  100. Avatar

    Good day! I am the chairperson of Gensan Gardeners Multi Purpose Cooperative. We are interested to enroll in your LANDSCAPE INSTALLATION & MAINTENANCE NC11. May we know if you offer short courses on this and how can we avail the program. Please help us and let me know soonest time possible. We have more than 20 possible students to enroll in this skill. Thanks po! Pahingi din po ng cp number ng focal person ninyo.

  101. Avatar

    How much will it cost for automotive servicing nc 11?

  102. hello po ask ko lang po kung available pa rin po ang housekeeping…..if meron how much po yong tuition fee at ilang mont po yong training salmt po…….waiting for your response and kindly send your response to my#0946021924 God bless….

  103. Printer technician po sir/mam available po ba? SALAMAT

  104. Hello po Ma’am/ Sir. How much po ung tuition fee sa automotive servicing NC2 and 3? O Meron po ba kaung inioffer na free training sa course na to?

  105. Hi po maam/sir.makano po tuition fee ng scaffold e.nc2..at pwede po b 30 yrs old?thanks

  106. Avatar

    Magkano po ang tuiton ng FCAW NC11 ma’am/Sir at ang schedule if wholeday or halfday po ba..

    Salamat po.

  107. Avatar

    Good morning po! When po start ng cnc milling operation nc3? My available slot po b this november? Thank you

  108. Hello Good Morning! How many days po yung Driving? and How much po ?
    Thank you

  109. good day po maam/sir tanung ko lang po kung magkano ung yuition fee for nihongo language training.
    salamat po..

  110. Avatar

    Hello po, Princess Joyce Tambogon from Baguio City po. May available po ba course ng Front Office and NC2 Food and Bevereage po? How much po mag enroll pag traning? hindi online po? Thank you sa info. Planning to enroll this coming year 2019. Thank you!

  111. full day po ba ung electrical installation?

  112. Good day Sir. I am interested to pursue carpentry nc3 which is preferably similar to home wooden furnitures & home carpentry and joinery works. Is it possible that I can take that course without taking carpentry nc2? Thanks for your time.

  113. Good day Sir. I would like to take carpentry nc3 to learn about home carpentry & joinery works and wood furniture works. Is it possible to take nc3 without taking carpentry nc2 (rough carpentry) ? Thanks sir.

  114. Hello ask ko lang po sana kung kelan start ng automotive course,nag pass po ako nung november tapos still waiting kung kelan start nung course..

  115. Hello sir I just want to ask if there is no course offered for solar installation and design?

  116. hm po tuition for english proficiency

  117. nagooffer pa po ba kayo ng landscaping course?

  118. Avatar

    Hello can I have a your contact number for inquiries? Thank you

  119. Ask ko lang po kung ano pa po yung avail na short term courses and kung may cellphone number po kayo.

    1. Better go and visit the office. Mobile numbers are not available to prevent from “manloloko” texters so if you can afford to call via smartphone to landline the number is just above. But I suggest you to go directly to the office to ask your queries personally. 😁

  120. Hi. Kelan po start ng classes if mag take ako ng chines and if may japanese language pa po sna.

  121. Avatar

    San po ba nakakakuha ng Forklift Certification? At my course po ba kayo pra sa forklift?

  122. hi ask q lng po kung available ung driving ncII enroll po aq magkano po tuition fee..thanks

  123. Hello po.. Kailan po mag start training sa ELECTRICAL INSTALLATION AND MAINTENANCE NC II

  124. Avatar

    good day po. ask ko if available po ba korean language training. tas anu po requerments? thanks.

  125. Good day po available pa po ba nag enquire na po but wala pa pong txt or tawag.. nakapag pasa na po ko ng requirements..

  126. Hi just want to ask kong kailan ang start ng authomotive nc 11, mag kano ang babayaran,at saka requirements.
    Thanks

  127. Good day Sir/ Ma’am, may I know if your institution is still offering the Nihongo language course? And if Yes, would it be possible for me to have a class only on Saturdays? I would really wanna know please, thank you. You can also contact me on this phone number 09- 090 – 607 – 178

  128. Hai po san po pwedeng mag enroll ng Pharmacy nc II OR III po?…Salamat po

  129. Good day po, how much is English Proficiency program and how long? Thanks po!

  130. pm po ask ko lang po sana kung magkakano po tuition fee sa gtaw at gmaw po salamat po

  131. may i ask if how much we’ll be paying if we enroll for the automotive servicing. thank you and God bless!

  132. Avatar

    I want to renew my GMAW, GMAW, and FCAW NCII. Can I renew with your institution? I got my NCII in TESDA RTC Calabarzon

  133. Available po b ang assessment ng scaffolding erector ncll

  134. Magkno po bayad sa pagkuha ng ncll scaffold erector sir/mam

  135. Good day sir/mam I am looking for a schedule for scaffold erector training course (NCII) thanks and good bless

  136. Good day po tanong ko lng po kelan shedule electrical maintenance or welding need ko po kc ng nc2.

  137. Good afternoon, i would like to ask the schedule for electrical maintenance and installation NC II and III this year 2020 here in Baguio City. And where is the possible training center that will handle the said course. Thank you po.

  138. Good day po maam/sir,open po ba ang enrollment sa electrical engineering technology ngayon 2020?

    Salamat poh..

    JSB.

  139. HI PO OPEN PO BA ANG ENROLLMENT SA PHARMACY OR TOURISM NGAUNG 2020

  140. Avatar

    good day po maam/sir kailan po ba ang enrollment ng electrical engineering technology ngayon 2020

    salamat po😊

  141. kailan po ang start ng English Proficiency Program ? may kasama bang computer knowledge ?

  142. Hi, I just want to take an assessment in loakan but the contact number they are given can not be reach.

  143. Sir,meron ba driving course 15 days at kano po bayad nun for 15 days.tnx

    1. List of TESDA accredited driving schools in Baguio City

      Baguio City School of Arts and Trades
      Driving NC II / Upper Session Road, Baguio City
      (074) 444-8459/ 444-9161

      BSBT College, Inc.
      Driving NC II / 434 Magsaysay Avenue, Baguio City
      (074) 442-2986/(074) 424-3703

      Regional Training Center – Baguio City
      Driving NC II / 133 Magsaysay Drive, Loakan Road, Baguio City
      (074) 424-8723, 424-8724

  144. Avatar

    hi good day can i ask when will be the next batch for electrical installation NC II

  145. Avatar

    Good day po. Gusto ko po magtake ng Electrical Installation and Maintenance NCII. Paano po mag enroll?

  146. Good day po. Interested po ako sa Technical Drafting NC II. Pwede malaman schedule at mode of teaching po? Salamat.

  147. Avatar

    Good evening po. Interested po ako na mag enroll sa automotive surving NC 1 or 2. Pano po mag enroll and face to face po ba or online thanks po.

  148. Good day! Pwde po ba malaman kung anong courses po Ang available ngyn? Pls pa update po ako… housekeeping po sana..thank you!

  149. I can’t see a caregiving course offered,,,

  150. Kailan po ang pwede mag parehistro para sa certificate in mechanical services?

  151. good day! do you have video editing course? Thank you.

  152. Good morning po nagtanong lang po Sana ako Kung may domestic work training po kayo.salamat po

  153. Avatar

    Hello po may course po bang, heating ventilation and air conditioning

Leave a Reply

Your email address will not be published. Required fields are marked *

Tesda Courses © 2015 Privacy | Disclaimer | Terms of Use