Regional Training Center III Mariveles Bataan

Regional Training Center III Mariveles Bataan is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Regional Training Center III Mariveles Bataan

Address: Wiswis, , Brgy. Camaya, BEZ, Mariveles, Bataan, Philippines
Telephone Number: 047-935-4751

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in Regional Training Center III Mariveles Bataan in the province of Bataan.

List of Tesda Courses Offered / Registered Programs Duration
 Automotive Servicing NC II  524 Hours
 Computer Hardware Servicing NC II  392 Hours
 Consumer Electronics Servicing NC II  438 Hours
 Dressmaking NC II  275 Hours
 Electrical Installation and Maintenance NC II  402 Hours
 Electrical Installation and Maintenance NC III  396 Hours
 Engine Overhauling Leading to Automotive Servicing NC III  40 Hours
 Gas Metal Arc Welding (GMAW) NC II  268 Hours
 Gas Tungsten Arc Welding (GTAW) NC II  268 Hours
 Industrial Sewing Machine Operator  120 Hours
 Machining NC II  464 Hours
 Masonry NC II  258 Hours
 Massage Therapy NC II  560 Hours
 Pipefitting NC II  202 Hours
 Scaffold Erection NC II  162 Hours
 Shielded Metal Arc Welding (SMAW) NC I  324 hours
 Shielded Metal Arc Welding (SMAW) NC II  324 Hours
 Trainers Methodology Level I  264 hours

Basic Requirements for TESDA Courses:

  • At least 15 years of age
  • Copy of NSO Birth Certificate
  • Certificate of Good Moral Character from last school attended.
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number 047-935-4751. You can also visit Regional Training Center III Mariveles Bataan. The assessment center is located at Wiswis, , Brgy. Camaya, BEZ, Mariveles, Bataan, Philippines.


Add a Comment
  1. ask ko lang po schedule ng assestment for scaffolding? need ko lang po kc makakuha ng nc2.

  2. Hello po ano po ang schedule ng enroll ng second sem.

  3. hello ask ko lang ho, I have nephew na hindi pa tapos mag high school,Gusto ko sana na pag-aralin ng Massage Therapy at kung magkano ho ang magagastos.

  4. Pwd po bng kumuha ng certifate n machining

  5. Avatar

    goodday po ako po JAMES VIRNI LEY LAPID BUENAVENTURA NG BRGY SISIMAN.. dati po akong estudyante jan ask ko lng po kung nanjan pa po ung traning certificate ko.. si sir granados po ang instructor ko

  6. gud day po!
    inquire lang po if anu po ung mga pang gabi nyu po na kurso.. ty po

  7. Ask ko lang po kung kailan pwede enroll for SMAW?

  8. ask,,,l lng,,,po…anu po ug,,mga,,requirements,,,,sa tesda

  9. Good day sir/ma’am,

    Would like to inquire when will be the schedule of Machining NC II

  10. Avatar

    Gud day, inquire lng po. Mgkano po training ng Electrical Installation And Maintenance nc3?

  11. Hi! May I ask the how much would be the tuition fee if I will be taking Computer Hardware Servicing NCII? Thank you and looking forward for the response upon this matter. God bless!

  12. Sir/ ma’am gusto ko po magaral ng electrical installation and maintenance nc ,taga mariveles bataan po ako .magkano tuition fee ?

  13. Avatar

    kelan po ang enrollment ng pipefiting nc2?

  14. Inquer LNG po available pa po ba yng SMAW welder NCII po thankyou po

  15. How much po tuition ng SMAW welder NCII

  16. Good afternoon kelan po pwedeng magenroll sa SMAW ? Thanks.

  17. Kelan po pwede magenroll ng Automotive or kaya ng SMAW

  18. hi po ask ko lang if year 2006 pa nkatanggap ng certificate sa TESDA foe machining, pwede pa po ba yun magamit s mga agencies na aapplyan or need magtake uli ng panibagong training? may validity po ba ang certificate? thanks po

  19. My care giver course po b kau dto?

  20. ask lng po if meron po kau book keeping NCIII course po?

  21. ask q po qng kailan pwede mag enroll ng dressmaking or idustrial sewing machine at qng magkano po..thank you

  22. Ask ko lng po..meron po ba kayong training for care giver..

  23. Good day po ask ko lang need ko pa ba kunin ang automotive servicing nc11 bago ako mag takexng engine overhauling nc111 or pwede nb engine overhauling lang

  24. Hi.. Ask ko lng pwede po ba mag aral kahit 3 to 6months ng culinary?

  25. Hello po ask ko lng po kng merun po kaung housekeeping po

  26. Anong schedule po ng traning ng authomotive nio this year end ng 2019?

  27. Hello po 🙂 ask ko lang po nag tatrabho po ako pero gusto ko pong mag aral sa tesda … sana po matulungan nyo ako bka po availabale ang saturday class … 🙂 Maraming salamat po ….

  28. Avatar

    Good day ask ko lang po NC11 housekeeping kelan at magkano po?

  29. May enrollment po ba ngayon sa Electrical Installation and Maintenance NC3 thank you po

  30. Avatar

    I am in the need of sourcing practical training providers for training and re-training of current employees to enhance their current knowledge and skills in the following disciplines:
    1) Instrumentation and Control
    2) Electrical
    3) Mechanical fitter Maintainer
    4) Machinist (Milling and Turning)
    5) Welding

    Please provide contact details of possible providers

Leave a Reply

Your email address will not be published. Required fields are marked *

Tesda Courses © 2015 Privacy | Disclaimer | Terms of Use