TESDA TRAINING REGULATIONS FOR MECHATRONICS SERVICING NC IV
The TESDA Course in MECHATRONICS SERVICING NC IV consists of competencies that must be possess to enable a person to develop advanced PLC and HMI software programs and perform commissioning, diagnostics & troubleshooting on advanced PLC- and HMI-based mechatronics and automation systems.
This Qualification is packaged from the competency map of the Electrical & Electronics Industry Sector
A student who has achieved this Course in MECHATRONICS SERVICING NC IV is competent to be:
- Mechatronics Technician
- Industrial Automation Technician
TRAINEE ENTRY REQUIREMENTS
Trainees or students who would like to enroll in this program must possess the following requirements:
- Holder of Mechatronics Servicing NC III
This list does not include specific institutional requirements such as educational attainment, appropriate work experience, and others that may be required of the trainees by the school or training center delivering the TVET program.
MECHATRONICS SERVICING NC IV – TESDA TRAINING COURSE
Course Title: MECHATRONICS SERVICING
Level: NC IV
Nominal Training Duration : 200 Hours
(Basic Competencies) 36 hrs.
(Common Competencies) 64 hrs.
(Core Competencies) 106 hrs.
This course is designed to develop & enhance the knowledge, skills, & attitudes of a Mechatronics Technician, in accordance with industry standards. It covers the basic & common competencies in addition to the core competencies such as developing advanced PLC and HMI software programs, performing commissioning, diagnostics & troubleshooting on advanced PLC- and HMI-based mechatronics and automation systems.
( The nominal duration of 200 hours covers only the basic, common and core units at Mechatronics Servicing NC IV level. TVET providers can however, offer a longer, ladderized course covering NC II, NC III and NC IV basic, common and core units.)
COMPETENCIES REQUIRED IN MECHATRONICS SERVICING NC IV
This units of competency comprising this qualification include Basic, Common, Elective and Core Competencies.
To obtain this TESDA course in MECHATRONICS SERVICING NC IV, all units prescribed for this qualification must be achieved.
These units of competency comprising this qualification include the following:
UNIT CODE | CORE COMPETENCIES (106 hours) |
---|---|
ELC311306 | Develop advanced PLC and HMI application program |
ELC311307 | Commission advanced PLC- and HMI-based mechatronics and automation systems |
ELC311308 | Diagnose and troubleshoot advanced PLC- and HMI-based mechatronics and automation systems |
UNIT CODE | COMMON COMPETENCIES (64 hours) |
ELC311205 | Use Hand Tools |
ELC311201 | Perform Mensuration and Calculation |
ELC311202 | Prepare and Interpret Technical Drawing |
ELC311204 | Apply Quality Standards |
ELC311203 | Perform Computer Operations |
ELC311206 | Terminate and Connect Electrical Wiring and Electronic Circuits |
ELC311209 | Test Electronic Components |
UNIT CODE | BASIC COMPETENCIES (36 hours) |
500311115 | Utilize specialized communication skills |
500311116 | Develop teams and individuals |
500311117 | Apply problem solving techniques in the workplace |
500311118 | Collect, analyze and organize information |
500311119 | Plan and organize work |
500311120 | Promote environmental protection |
CORE COMPETENCIES
This section gives the details of the contents of the core units of competency required in MECHATRONICS SERVICING NC IV.
DEVELOP ADVANCED PLC AND HMI APPLICATION PROGRAM
UNIT CODE : ELC311306
This unit covers the knowledge, skills and attitudes necessary to develop, analyze, implement and review advanced PLC and HMI application programs in line with requirements, software specifications and applications. This includes competencies in preparing advanced PLC and HMI application program as well as testing and documenting the developed advanced PLC and HMI application program.
- Prepare advanced PLC and HMI application program
- Advanced PLC and HMI application program is prepared using appropriate code.
- Advanced PLC and HMI application program is debugged and reworked for correction of errors
- Appropriate ergonomic standards are observed to reduce fatigue while working on a computer
- Test developed Advanced PLC and HMI application program
- Developed advanced PLC and HMI application program is run to ensure all syntax errors are corrected.
- Program is downloaded using manufacturer’s procedures.
- Any limits, exceptions and other aspects built into the control circuits, advanced PLC and HMI application program are tested against user’s control requirements.
- Advanced PLC and HMI application program is tested for user’s acceptance
- Document advanced PLC and HMI application program developed
- Final control circuits, advanced PLC and HMI application program flow or flowchart are prepared according to company standards.
- Labels and comments are included in the program for user–friendliness.
- Final revision of the advanced PLC and HMI application program and external devices assignment are prepared in softcopy and printed formats
UNIT TITLE : COMMISSION ADVANCED PLC- AND HMI-BASED MECHATRONICS AND AUTOMATION SYSTEMS
UNIT CODE : ELC311307
This unit covers the knowledge, skills and attitudes necessary to undertake the commissioning of advanced PLC- and HMI-based mechatronics and automation systems. This includes planning and preparing to undertake commissioning process, commissioning and testing mechatronics and automation systems.
- Plan and prepare for commissioning activities
- Commissioning procedures are planned and prepared in line with job requirements.
- OH & S policies and procedures are followed in line with job requirements.
- Commissioning procedures are checked against specifications and requirements
- Tools, equipment and testing devices needed are obtained and checked for correct operation and safety.
- Materials necessary are obtained in accordance with job requirements
- Commission mechatronics and automation system
- Appropriate personal protective equipment (PPE) is used and OHS policies & procedures are followed.
- Mechatronics and automation system are checked using specified procedures
- Commissioning procedure is performed in accordance with requirements without damage to the surrounding environment or services
- Unplanned events or conditions are responded to in accordance with established procedures
- Document commissioned mechatronics and automation system
- Commissioned mechatronics and automation system is documented according to established procedures or manufacturer’s instructions.
- Report on the commissioning activities is prepared according to the company requirements.
UNIT TITLE : DIAGNOSE AND TROUBLESHOOT ADVANCED PLC- AND HMIBASED MECHATRONICS AND AUTOMATION SYSTEMS
UNIT CODE : ELC311308
This unit covers the knowledge, skills and attitudes needed to diagnose and troubleshoot defects in Mechatronics and automation systems.
- Plan and prepare for diagnosis and troubleshooting of faults in mechatronics and automation systems
- Diagnosis and troubleshooting of faults is planned and prepared in line with job requirements
- OH & S policies and procedures are followed in line with job requirements
- Authorized personnel are consulted to coordinate the work effectively
- Materials necessary are obtained in accordance with established procedures and job requirements
- Tools, equipment and testing devices needed are obtained in accordance with job requirements and checked for proper operation and safety.
- Mechatronics system faults are checked against job requirements.
- Diagnose and troubleshoot faults of mechatronics and automation systems
- Appropriate personal protective equipment is used and OHS policies & procedures are followed
- Fault or problem in the mechatronics system is diagnosed and troubleshoot in line with the standard operating procedures and technical requirements.
- Contingency measures are managed and implemented in accordance with established procedures
- Unplanned events or conditions are responded to in accordance with established procedures
- Rectify/ Correct faults in the mechatronics and automation system
- Appropriate personal protective equipment is used and OH & S policies & procedures are followed
- Systems and associated equipment are isolated, when necessary, in accordance with established procedures
- Defective components or parts are replaced or corrected without damage to the surrounding environment or services
- Adjustments are made in accordance with established procedures, where necessary.
- Unplanned events or conditions are responded to in accordance with established procedures.
- Test and document the corrected mechatronics and automation system
- Mechatronics and automation system and associated equipment are tested using specified testing procedures as per manufacturer’s instructions.
- Mechatronics and automation system and associated equipment are checked to ensure safe operation.
- Unplanned events or conditions are responded to in accordance with established procedures.
- Documentation is prepared/completed in accordance with company requirements
COMMON COMPETENCIES
UNIT TITLE : USE HAND TOOLS
UNIT CODE : ELC724201
This unit covers the knowledge, skills and attitudes on the safe use, handling and maintenance of tools.
- Plan and prepare for tasks to be undertaken
- Tasks to be undertaken are properly identified
- Appropriate hand tools are identified and selected according to the task requirements
- Prepare hand tools
- Appropriate hand tools are checked for proper operation and safety
- Unsafe or faulty tools are identified and marked for repair according to standard company procedure
- Use appropriate hand tools and test equipment
- Tools are used according to tasks undertaken
- All safety procedures in using tools are observed at all times and appropriate personal protective equipment (PPE) are used
- Malfunctions, unplanned or unusual events are reported to the supervisor
- Maintain hand tools
- Tools are handled without damage according to procedures
- Routine maintenance of tools undertaken according to standard operational procedures, principles and techniques
- Tools are stored safely in appropriate locations in accordance with manufacturer’s specifications or standard operating procedures
UNIT TITLE : PERFORM MENSURATION AND CALCULATION
UNIT CODE : ELC311201
This unit covers the knowledge, skills and attitudes and values needed identify, care, handle and use measuring instruments
- Select measuring instruments
- Object or component to be measured is identified according to procedures
- Correct specifications are obtained from relevant source
- Measuring tools are selected in line with job requirements
- Carry out measurements and calculation
- Appropriate measuring instrument is selected to achieve required outcome
- Accurate measurements are obtained for job
- Calculation needed to complete work tasks are performed using the four basic process of addition (+), subtraction (-), multiplication (x), and division (/)
- Calculation involving fractions, percentages and mixed numbers are used to complete workplace tasks.
- Numerical computation is checked and corrected for accuracy
- Instruments are read to the limit of accuracy of the tool.
- Maintain measuring instruments
- Measuring instruments are handled without damage according to procedures
- Measuring instruments are cleaned before and after using.
- Proper storage of instruments are undertaken according to manufacturer’s specifications and standard operating procedures.
UNIT TITLE : PREPARE AND INTERPRET TECHNICAL DRAWING
UNIT CODE : ELC311202
This unit covers the knowledge, skills and attitudes and values needed to prepare/interpret diagrams, engineering abbreviation and drawings, symbols, dimension.
- Identify different kinds of technical drawings
- Correct technical drawing is selected according to job requirements.
- Technical drawings are segregated in accordance with the types and kinds of drawings
- Interpret technical drawing
- Components, assemblies or objects are recognized as required.
- Dimensions of the key features of the objects depicted in the drawing are correctly identified.
- Symbols used in the drawing are identified and interpreted correctly.
- Drawing is checked and validated against job requirements or equipment in accordance with standard operating procedures.
- Prepare/make changes to electrical/electronic schematics and drawings
- Electrical/electronic schematic is drawn and correctly identified.
- Correct drawing is identified, equipment are selected and used in accordance with job requirements.
- Store technical drawings and equipment /instruments
- Care and maintenance of drawings are undertaken according to company procedures.
- Technical drawings are recorded and inventory is prepared in accordance with company procedures.
- Proper storage of instruments is undertaken according to company procedures.
UNIT TITLE : APPLY QUALITY STANDARDS
UNIT CODE : ELC315202
This unit covers the knowledge, skills, (and) attitudes and values needed to apply quality standards in the workplace.
The unit also includes the application of relevant safety procedures and regulations, organization procedures and customer requirements
- Assess quality of received materials or components
- Work instructions are obtained and work is carried out in accordance with standard operating procedures
- Received materials or component parts are checked against workplace standards and specifications
- Faulty material or components related to work are identified and isolated
- Faults and any identified causes are recorded and/or reported to the supervisor concerned in accordance with workplace procedures
- Faulty materials or components are replaced in accordance with workplace procedures
- Assess own work
- Documentation relative to quality within the company is identified and used
- Completed work is checked against workplace standards relevant to the task undertaken
- Faulty pieces are identified and isolated
- Information on the quality and other indicators of production performance is recorded in accordance with workplace procedures
- Deviations from specified quality standards, causes are documented and reported in accordance with the workplace’ standards operating procedures
- Engage in quality improvement
- Process improvement procedures are participated in relation to workplace assignment
- Work is carried out in accordance with process improvement procedures
- Performance of operation or quality of product or service to ensure customer satisfaction is monitored
UNIT TITLE : PERFORM COMPUTER OPERATIONS
UNIT CODE : ELC311203
This unit covers the knowledge, skills, (and) attitudes and values needed to perform computer operations which include inputting, accessing, producing and transferring data using the appropriate hardware and software
- Plan and prepare for task to be undertaken
- Requirements of task are determined according to job specifications
- Appropriate hardware and software are selected according to task assigned and required outcome
- Task is planned to ensure OH & S guidelines and procedures are followed
- Input data into computer
- Data are entered into the computer using appropriate program/application in accordance with company procedures
- Accuracy of information is checked and information is saved in accordance with standard operating procedures
- Inputted data are stored in storage media according to requirements
- Work is performed within ergonomic guidelines
- Access information using computer
- Correct program/application is selected based on job requirements
- Program/application containing the information required is accessed according to company procedures
- Desktop icons are correctly selected, opened and closed for navigation purposes
- Keyboard techniques are carried out in line with OH & S requirements for safe use of keyboards
- Produce/output data using computer system
- Entered data are processed using appropriate software commands
- Data printed out as required using computer hardware/peripheral devices in accordance with standard operating procedures
- Files, data are transferred between compatible systems using computer software, hardware/ peripheral devices in accordance with standard operating procedures
- Maintain computer equipment and systems
- Systems for cleaning, minor maintenance and replacement of consumables are implemented
- Procedures for ensuring security of data, including regular back-ups and virus checks are implemented in accordance with standard operating procedures
- Basic file maintenance procedures are implemented in line with the standard operating procedures
UNIT OF COMPETENCY: TEST ELECTRONIC COMPONENTS
UNIT CODE : ELC311209
This unit covers the knowledge, skills and attitudes required to test electronic components. It includes competencies in determining the criteria for testing electronics components, planning an approach for component testing, testing the components and evaluating the testing process.
- Determine criteria for testing electronics components
- Work instructions are obtained and clarified based on job order or client requirements
- Responsible person is consulted for effective and proper work coordination
- Data sheets/Application notes are obtained and interpreted based on manufacturer’s specifications
- Testing criteria are defined to ensure that components meet technical and quality requirements
- Document and communicate testing criteria to relevant personnel
- Plan an approach for component testing
- Various testing methods are identified based on types of electronic components
- Characteristics and appropriateness of testing methods to be used during development and on completion is determined
- Testing methods are considered/selected in relation to appropriate testing strategy
- Plan for testing components is developed at specified points during development and on completion
- Required test & measuring instruments and tools are prepared and checked in accordance with established procedures
- Records system is established to document testing results, including problems and faults
- Test components
- Testing methods are applied to ensure that products meet creative, production and technical requirements
- Problems and faults detected by testing are recorded and remedial steps taken in records system is documented
- Problems and faults detected during testing are resolved in accordance with agreed project or industry practice
- Evaluate final products against the previously determined criteria
- Testing process is documented and summarized evaluation report is submitted to relevant personnel
- Evaluate the testing process
- Testing methods that were successful and those that led to difficulties are identified based on industry standards
- Testing process and records system are evaluated based on standard procedures
- Test results/findings are documented for subsequent components testing.
BASIC COMPETENCIES
UNIT OF COMPETENCY : UTILIZE SPECIALIZED COMMUNICATION SKILLS
UNIT CODE : 500311115
This unit covers the knowledge, skills and attitudes required to use specialized communication skills to meet specific needs of internal and internal clients, conduct interviews, facilitate group of discussions, and contribute to the development of communication strategies.
- Meet common and specific communication needs of clients and colleagues
- Specific communication needs of clients and colleagues are identified and met
- Different approaches are used to meet communication needs of clients and colleagues
- Conflict is addressed promptly and in a timely way and in a manner which does not compromise the standing of the organization
- Contribute to the development of communication strategies
- Strategies for internal and external dissemination of information are developed, promoted, implemented and reviewed as required
- Channels of communication are established and reviewed regularly
- Coaching in effective communication is provided
- Work related network and relationship are maintained as necessary
- Negotiation and conflict resolution strategies are used where required
- Communication with clients and colleagues is appropriate to individual needs and organizational objectives
- Represent the organization
- When participating in internal or external forums, presentation is relevant, appropriately researched and presented in a manner to promote the organization
- Presentation is clear and sequential and delivered within a predetermined time
- Utilize appropriate media to enhance presentation
- Differences in views are respected
- Written communication is consistent with organizational standards
- Inquiries are responded in a manner consistent with organizational standard
- Facilitate group discussion
- Mechanisms which enhance effective group interaction is defined and implemented
- Strategies which encourage all group members to participate are used routinely
- Objectives and agenda for meetings and discussions are routinely set and followed
- Relevant information is provided to group to facilitate outcomes
- Evaluation of group communication strategies is undertaken to promote participation of all parties
- Specific communication needs of individuals are identified and addressed
- Conduct interview
- A range of appropriate communication strategies are employed in interview situations
- Records of interviews are made and maintained in accordance with organizational procedures
- Effective questioning, listening and nonverbal communication techniques are used to ensure that required message is communicated
UNIT OF COMPETENCY : DEVELOP TEAMS AND INDIVIDUALS
UNIT CODE : 500311116
This unit covers the skills, knowledge and attitudes required to determine individual and team development needs and facilitate the development of the workgroup.
- Provide team leadership
- Learning and development needs are systematically identified and implemented in line with organizational requirements
- Learning plan to meet individual and group training and developmental needs is collaboratively developed and implemented
- Individuals are encouraged to self evaluate performance and identify areas for improvement
- Feedback on performance of team members is collected from relevant sources and compared with established team learning process
- Foster individual and organizational growth
- Learning and development program goals and objectives are identified to match the specific knowledge and skills requirements of competency standards
- Learning delivery methods are appropriate to the learning goals, the learning style of participants and availability of equipment and resources
- Workplace learning opportunities and coaching/mentoring assistance are provided to facilitate individual and team achievement of competencies
- Resources and timelines required for learning activities are identified and approved in accordance with organizational requirements
- Monitor and evaluate workplace learning
- Feedback from individuals or teams is used to identify and implement improvements in future learning arrangements
- Outcomes and performance of individuals/teams are assessed and recorded to determine the effectiveness of development programs and the extent of additional support
- Modifications to learning plans are negotiated to improve the efficiency and effectiveness of learning
- Records and reports of competency are maintained within organizational requirement
- Develop team commitment and cooperation
- Open communication processes to obtain and share information is used by team
- Decisions are reached by the team in accordance with its agreed roles and responsibilities
- Mutual concern and camaraderie are developed in the team
- Facilitate accomplishment of organizational goals
- Team members actively participated in team activities and communication processes
- Teams members developed individual and joint responsibility for their actions
- Collaborative efforts are sustained to attain organizational goals
UNIT OF COMPETENCY : APPLY PROBLEM SOLVING TECHNIQUES IN THE WORKPLACE
UNIT CODE : 500311117
This competency covers the knowledge, skills and attitudes required to apply the process of problem solving and other problems beyond those associated directly with the process unit. It includes the application of structured processes and improvement tools. This competency is typically performed by an experienced technician, team leader or supervisor.
- Analyze the problem
- Issues/concerns are evaluated based on data gathered
- Possible causes of problem are identified within the area of responsibility as based on experience and the use of problem solving tools/analytical techniques
- Possible cause statements are developed based on findings
- Identify possible solutions
- All possible options are considered for resolution of the problem in accordance with safety and operating procedures
- Strengths and weaknesses of possible options are considered
- Corrective action is determined to resolve the problem and its possible future causes
- Recommend solution to higher management
- Report/communication or documentation are prepared
- Recommendations are presented to appropriate personnel
- Recommendations are followed-up, if required
- Implement solution
- Measurable objectives are identified
- Resource needs are identified
- Timelines are identified in accordance with plan
- Evaluate/Monitor results and outcome
- Processes and improvements are identified based on evaluative assessment of problem
- Recommendations are prepared and submitted to superiors.
UNIT OF COMPETENCY : COLLECT, ANALYZE AND ORGANIZE INFORMATION
UNIT CODE : 500311118
This unit covers the outcomes required to process, analyze, interpret and organize workplace information and other relevant data.
- Study information requirements
- Needs are identified using established research procedures
- Relevant forms and recording systems are used to gather the information.
- Respondents are selected to implement survey / research based on established procedures.
- Process data
- Data are collected and collated based on the prescribed method.
- Relevant data are used as references in accordance with the objectives of the program.
- Information is compiled according to the required form.
- Analyze, interpret and organize information gathered
- Data are analyzed using relevant methodologies
- Where applicable, statistical analysis/methods are employed according to the objectives of the program
- Graphs and other visual presentations are prepared to facilitate analysis / interpretation of information
- Present findings/recommendations
- Findings/recommendations summarized and presented/packaged in user-friendly manner
- Relevant inputs gathered to finalize report
- Draft report prepared based on standard format.
- Technical reports are submitted and disseminated to concerned offices.
UNIT OF COMPETENCY : PLAN AND ORGANIZE WORK
UNIT CODE : 500311119
This unit covers the outcomes required in planning and organizing work. It may be applied to a small independent operation or to a section of a large organization.
- Set objectives
- Objectives are consistent with and linked to work activities in accordance with organizational aims
- Objectives are stated as measurable targets with clear time frames
- Support and commitment of team members are reflected in the objectives
- Realistic and attainable objectives are identified
- Plan and schedule work activities
- Tasks/work activities to be completed are identified and prioritized as directed
- Tasks/work activities are broken down into steps in accordance with set time frames achievable components in accordance with set time frames
- Resources are allocated as per requirements of the activity
- Schedule of work activities is coordinated with personnel concerned
- Implement work plans
- Work methods and practices are identified in consultation with personnel concerned
- Work plans are implemented in accordance with set time frames, resources and standards
- Monitor work activities
- Work activities are monitored and compared with set objectives
- Work performance is monitored
- Deviations from work activities are reported and recommendations are coordinated with appropriate personnel and in accordance with set standards
- Reporting requirements are complied with in accordance with recommended format
- Observe timeliness of report
- Files are established and maintained in accordance with standard operating procedures
- Review and evaluate work plans and activities
- Work plans, strategies and implementation are reviewed based on accurate, relevant and current information
- Review is based on comprehensive consultation with appropriate personnel on outcomes of work plans and reliable feedback
- Results of review are provided to concerned parties and formed as the basis for adjustments/simplifications to be made to policies, processes and activities
- Performance appraisal is conducted in accordance with organization rules and regulations
- Performance appraisal report is prepared and documented regularly as per organization requirements.
- Recommendations are prepared and presented to appropriate personnel/authorities
- Feedback mechanisms are implemented in line with organization policies
UNIT OF COMPETENCY : PROMOTE ENVIRONMENTAL PROTECTION
UNIT CODE : 500311120
This unit covers the knowledge, skills and attitudes required in adhering to environmental protection principles, strategies and guidelines
- Study guidelines for environmental concerns.
- Environmental legislations/conventions and local ordinances are identified according to the different environmental aspects/impact.
- Industrial standard/environmental practices are described according to the different environmental concerns.
- Implement specific environmental programs.
- Programs/Activities are identified according to organizations policies and guidelines.
- Individual roles/responsibilities are determined and performed based on the activities identified.
- Problems/ constraints encountered are resolved in accordance with organizations’ policies and guidelines
- Stakeholders are consulted based on company guidelines.
- Monitor activities on environmental protection/programs
- Activities are periodically monitored and evaluated according to the objectives of the environmental program
- Feedback from stakeholders are gathered and considered in proposing enhancements to the program based on consultations
- Data gathered are analyzed based on evaluation requirements
- Recommendations are submitted based on the findings.
- Management support systems are set/established to sustain and enhance the program
- Environmental incidents are monitored and reported to concerned/proper authorities.
DEFINITION OF TERMS
GENERAL
- Certification – is the process of verifying and validating the competencies of a person through assessment
- Certificate of Competency (COC) – is a certification issued to individuals who pass the assessment for a single unit or cluster of units of competency
- Common Competencies – are the skills and knowledge needed by all people working in a particular industry
- Competency – is the possession and application of knowledge, skills and attitudes to perform work activities to the standard expected in the workplace
- Competency Assessment – is the process of collecting evidence and making judgments on whether competency has been achieved
- Competency Standard (CS) – is the industry-determined specification of competencies required for effective work performance
- Context of Assessment – refers to the place where assessment is to be conducted or carried out
- Core Competencies – are the specific skills and knowledge needed in a particular area of work – industry sector/occupation/job role
- Critical aspects of competency – refers to the evidence that is essential for successful performance of the unit of competency
- Elective Competencies – are the additional skills and knowledge required by the individual or enterprise for work
- Elements – are the building blocks of a unit of competency. They describe in outcome terms the functions that a person performs in the workplace.
- Evidence Guide – is a component of the unit of competency that defines or identifies the evidences required to determine the competence of the individual. It provides information on critical aspects of competency, underpinning knowledge, underpinning skills, resource implications, assessment method and context of assessment
- Level – refers to the category of skills and knowledge required to do a job
- Method of Assessment – refers to the ways of collecting evidence and when,
evidence should be collected - National Certificate (NC) – is a certification issued to individuals who achieve all the required units of competency for a national qualification defined under the Training Regulations. NCs are aligned to specific levels within the PTQF
- Performance Criteria – are evaluative statements that specify what is to be assessed and the required level of performance
- Qualification – is a cluster of units of competencies that meets job roles and is significant in the workplace. It is also a certification awarded to a person on successful completion of a course in recognition of having demonstrated competencies in an industry sector
- Range of Variables – describes the circumstances or context in which the work is to be performed
- Recognition of Prior Learning (RPL) – is the acknowledgement of an individual’s skills, knowledge and attitudes gained from life and work experiences outside registered training programs
- Resource Implications – refers to the resources needed for the successful performance of the work activity described in the unit of competency. It includes work environment and conditions, materials, tools and equipment
- Basic Competencies – are the skills and knowledge that everyone needs for work
- Training Regulations (TR) – refers to the document promulgated and issued by TESDA consisting of competency standards, national qualifications and training guidelines for specific sectors/occupations. The TR serves as basis for establishment of qualification and certification under the PTQF. It also serves as guide for development of competency-based curricula and instructional materials including registration of TVET programs offered by TVET providers
- Underpinning Knowledge – refers to the competency that involves in applying knowledge to perform work activities. It includes specific knowledge that is essential to the performance of the competency
- Underpinning Skills – refers to the list of the skills needed to achieve the elements and performance criteria in the unit of competency. It includes generic and industry specific skills
- Unit of Competency – is a component of the competency standards stating a specific key function or role in a particular job or occupation; it is the smallest component of achievement that can be assessed and certified under the PTQF
SECTOR SPECIFIC
- Actuator: In a closed-loop control system, that part of the final control element that translates the control signal into action by the control device.
- Automation: (1) The conversion to and implementation of procedures, processes, or equipment by automated means. (2) Industrial open- or closed-loop control systems in which the manual operation of controls is replaced by servo operation.
- CAD: Computer-Aided Design is the use of high-resolution graphics in a wide range of design activities, allowing quick evaluation and modification of intent. It is commonly used to design architectural, mechanical and electrical engineering drawings.
- Conveyor: A horizontal, inclined or vertical device for moving or transporting bulk materials, packages, or objects in a path predetermined by the design of the device and having points of loading and discharge fixed, or selective.
- Ergonomics –“The systematic application of knowledge about the psychological, physical, and social attributes of human beings in the design and use of all things which affect a person’s working conditions: equipment and machinery, the work environment and layout, the job itself, training and the organization of work.” (Humansystems Inc).
- PLC (Programmable Logic Controller) : A class of industrially hardened devices that provides hardware interface for input sensors and output actuators. PLCs can be programmed using relay ladder logic to control the outputs based on input conditions and / or algorithms contained in the memory of the PLC.
- Robotics: The study of the design and use of robots, particularly for their use in manufacturing and related processes.
- Sensor: A transducer whose input is a physical phenomenon and whose output is a quantitative measure of the phenomenon.
- Sequence control: The control of a series of machine movements, with the completion of one movement initiating the next. The extent of movements is typically not specified by numerical input data.
- Servomechanism: An automatic device for controlling large amounts of power by means of small amounts of power.
- Servomotor: A power-driven mechanism that supplements a primary control operated by a comparatively feeble force (as in a servomechanism).
- Simulation: (1) A device, system, or computer program that represents certain features of the behavior of a physical or abstract system. Vendors of planning and scheduling, forecasting and demand management, and other types of decision support systems make growing use of simulation to compare the consequences of alternative courses of action.
- Software: The entire set of programs, procedures, and related documentation associated with a computer.
- Static Calibration: A calibration recording pressure versus output at fixed points at room temperature.
- Systems integration: The ability of computers, instrumentation, and equipment to share data or applications with other components in the same or other functional areas.