TESDA-Regional Training Center – VII (Cebu) Courses

TESDA-Regional Training Center – VII (Cebu) is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

TESDA-Regional Training Center – VII (Cebu)

Address: TESDA 7 Compound Arcbishop Reyes Avenue, Cebu City, Philippines
Telephone Number: (032) 412-7267 / 416-8876 / 09455501436

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in “TESDA-Regional Training Center – VII (Cebu)” in the province of Cebu.

List of Tesda Courses Offered / Registered Programs

Course Authorized Duration
Barangay Health Services NC II 463 Hours
Contact Tracing Level II 120 Hours
Produce Organic Concoctions and Extracts Leading to Organic Agriculture Production NC II 106 Hours
Trainers Methodology Level II 568 Hours
Agroentrepreneurship NC II 263 Hours
Agroentrepreneurship NC III 469 Hours
Driving NC II 142 Hours

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number 412-0306-07. You can also visit TESDA-Regional Training Center – VII (Cebu). The assessment center is located at TESDA 7 Compound Arcbishop Reyes Avenue, Cebu City, Philippines.


Updated: January 29, 2021 — 11:46 pm

89 Comments

Add a Comment
  1. Hello have a nice day.. sir/mam pwede ko po makuha cellphone number nyo. Gusto ko po kasi mag enroll sa automotive secvicing NCII. Thanks

    Please reply.

  2. Good day. Maam/sir., mi caregiving course po ba ang TESDA cebu ?

  3. good pm. maam/sir, pwedi ko mangutana kung kanus.a ang enrollment kay gusto ko mo eskwela ug automotive servicing NC II nga course , thank you ?

    1. Avatar

      Good day,
      Maam/sir this is JOSE PAGLINAWAN CATUBIG III, ask lang ko kung pwede pa ba makakuha ko ug copy sa akong NCII certificate sa heavy equipment operation on forklift? Kay nawala akong copy.
      Pwede ko makontak sa 09953991392, salamat kaayo. GODBLESS

  4. Naay Housekeeping course or Cooking?please reply interested here

  5. Hi how to enrol dressmaking class here in cebu city?

  6. naay backhoe operator training dre ?

  7. Good day Maam/Sir:mag inquire lng unta ko f naai training ds coming month for housekeeping…..salamat..

  8. Avatar

    Sir good evening may available po ba kayo na training for TM sa Hairdressing? Kailangan na kailangan ko po para makapagturo ako sa Senior High.

  9. Avatar

    Hi, naay Housekeeping course?

  10. Dear mam/sir
    Good day mo enroll ta ko og automotive servicing unsay duol nga branch sa tesda Dre aa Mandaue
    Og pwede sad nko makuha ang phone number thank you

  11. Avatar

    Good day po..Pwde po ba mag pa enroll as plumbing po?paano po ba?thanks po.

  12. good day po puede ba maka training ug crane and backhoe operator dati ako ofw gusto ko maka experience as operator pls.reply.

  13. Avatar

    Hi, Ma’am/Sir. I would like to ask if you have Instrumentation and Control Servicing NCII available. If there is, how much would be the cost to enroll or the cost of the whole duration of the program. Thanks.

  14. Avatar

    Hi ma’am/sir i would like to ask if you have course for animatics?

  15. Good day ma’am/sir,
    I would like to ask at your good office if there is available training on NC3 SMAW course?Thank you.

  16. good morning mam.naay bayad kung magpa endrol ta sa tesda.

  17. you have training schedule for electrical and boiler this 2018? I want to train our engineering staffs… thanks

  18. Madam/sir, my i know your sked for NC II in welding and computer? thanks and Good Bless!

  19. somebody wants to take exams for NC II for computer, electrical and welding . can you give us updates for your schedule of exams?

  20. Avatar

    Do you have a training course of Diesel Generators or Generator

  21. Avatar

    How much naman po ang tuition fee sa driving NCII? And do you have language courses po?

  22. Avatar

    Just asking lng sir/mam ug naa ba mo small engine servicing course dri sa cebu…

  23. good day..wanna ask when start sa class sa housekeepping 1st batch 2018?

  24. hi good day. ask ko lng po bakit wala nang renew sa NCII?
    for electrical. tnx

  25. Good day! Kanus.a ang starting enrollment diri sa cebu this year? Naay computer related courses gi offer ang tesda dinhi sa cebu? Thanks!!!

  26. Avatar

    Good day tesda cebu ask lng po if kelan sked nyo ng enrolles dis year?s smaw nc2 at s driving nc2.thnk you

  27. Ma’am may nc2 be ang mechanical fitter millwright fitter???

  28. Good morning Ma’am/Sir
    ask unta ko if when mag start ang TM training sa Bread and Pastry.

  29. Hello mam/sir gusto ko mgaral ng butchers poidi ko po mkuha iyong # niyo? Tnx po

  30. Gdpm mam sir ask langko LNG naa ba cargiveng course dri cebu

  31. gud am mam/sir
    ask unta ko f naaba course driving or training driver of hriller truck,,,,
    salamat mam/sir and god bless””””

  32. Avatar

    Hello maam/sir
    ask lang ko kung naa ba training sa safety officer dri cebu.thanks&god bless..

  33. Mam.sir .good evening .meron po ba kayong courses offered for caregiver in tesda for cebu city?

  34. Hi, naa ba dressmaking course karon offered for this year 2018?

    1. hi mam/sir good day ninyo naa moy training for safety officer?

  35. Duna bay training party crane operation? Kay duna koy pa attend non.

  36. Hi Ma’am,

    Ask ko if duna training for crane operation this month. I want to attend. Thank you.

  37. Avatar

    Good pm po maam/sir,ask lng po ako kung nag offer po ba kau ng dental hygienist or NCIV?kung meron po magkano nmn ang tuition fee..longing for your reply maam/sir.tnx

  38. Good afternoon maam/sir, may available po ba kayong bookkeeping dito sa Cebu?

  39. Interested poko sa plumbing.. When ang start ng enrolment and classes.

  40. Hi sir/ma’am, may baking and pastry training course para sa highschool grad na edaran sa tesda region 7? At anong mga requirements na kakailangang complying?

  41. Good day ,I just want to ask if napa bay available for housekeeping NC 2 ?

  42. Sir, Maam: Requesting if there is a schedule for Driving NC II at TESDA Regional Center this May or June 2018. Thank you.

  43. maam/sir , meron bang Automotive Body Repairing sa cebu salamat po, more power tesda

  44. Avatar

    Maam/sir naa pay slot ang automotive servicing NC ll.
    Dayun unsay requirements sa pag enroll?

  45. Mag kanu po ung driving

  46. maa n sir
    c jonathan ni from tayud consolacion inquiring you nga asa d i ang pwde mu kuha ug nc 2 for a backhoe operator hping response is my wants hers my 09385988634 thank you

  47. Good afternoon ask lang ko asa dapit ang tesda sa mandaue?, salamat

  48. Good afternoon asa dapit ang tesda sa mandaue? Salamat

  49. hello maam/sir,
    naa mo open next month tesda na housekeeping course,then how much the tuition fee?

  50. Avatar

    Hi good evning, sir/maam kanus.a mag open ang aircon course.

  51. hello sir/mam goodmorning pwede mangutana…naa tay course nga scaffolding?

  52. Avatar

    Good day mam, naa karon available schedule sa electronics assembler?

  53. Hi sir/maam pilay edad para maka enroll sa tesda?

    1. Naa sa taas ang requirements.

  54. Hi sir/maam naa moy schedule training sa shielded metal Arc welding(SMAW)NC ll karong april 2019.ug pilay ma bayran ana na course.

  55. Avatar

    Sir, Madam,

    Can I enrol for Driving NC II? I am a college level, quit schooling and needs your training for my future development. Thank you.

  56. Gud morning…mam nus.a mag start in.u enrollin
    g karon 2019?? Salamat..

  57. Do you have dressmaking course offered on weekends only?

  58. When magsugod ang CISCO networking and is it for free? tnx

  59. hi when mag start ang driving NC 11. auto mechanic d i ko. need to learn more how to drive.

  60. Hi ma am/ Sir,

    Do you have a training program for computer numeric control(CNC) for wood or metal? thank you and God bless.

  61. hi maam naa pa automotive servicing nc111 ninyo ug kanus. ah magsugod ang klasi plz reply thank.

  62. Good day sir/maam, ask ko lng if ongoing pa ang enrollment sa refrigeration and air conditioning? Salamat

    1. Good am po , mag tatanong lang sana ako kung available pa po ba yung course na automotive NC 3 kasi gusto ko po mag pa endroll salamat ?

  63. Good day po. Pwede po bang mgpa enroll sa tesda kahit na ALS graduate ? Please reply.

  64. Good Day po, Anong accredited School po ba ang nag ooffer nang Refregiration & Air Conditioning Course.

  65. Avatar

    SIR/MAM. PWEDE MAG INQUIRE KO SA NC II PLUMBING COURSE KANUS A ANG KLASE SUGOD

  66. Sir/Mam may offer ba kayong Language Courses?

  67. Avatar

    Hi sir/ mam may culinary po ba how to endroll po and when po cebu area po

  68. Good day!

    Is the office or services available during these days of pandemic?
    Please advise.

    Thank you.

  69. Helo po sir and mam good day sa lahat bago salamat sa namamahala sa school ito may nagtesda po ako online training nagpili po ako ng corsung ;computersystem servicing’ may tinatawag na information computer technology.may completion na po assestment na lang kulang kailan ako mag assestment ?

  70. pwd po mag enroll beauty care nc11

  71. Avatar

    Hello Maam/Sir may course ba kayo sewing machine.

  72. Good day ma’am

    I would like to enroll in automotive course.

  73. I would like to enroll basic computer?

  74. hello good day, isa po akong dating ofw, gusto po ko mag enroll sa CNC lathe machine operation, thank you.

  75. Avatar

    do you a scheduled class for basic welding…pls give the date…thanks

  76. Gud a.m po,pwede po ba hingin ang number nyo?d ko po kasi makontak yung number na naka post sa inyo kasi mag iinquire po ako sa caregiving

  77. Avatar

    Greetings!

    I would like to ask if there’s a training for Computer Repair Services?

    Hoping for a positive and timely reply.

    Have a nice evening.

  78. Good day maam/sir can i ask if there’s a training for electrical maintenance tesda

  79. Dear Ma’am & Sir,

    I just want to inquire, Naay Moy course for Automotive?

    when Is the schedule?

    1. Mom im her yesterday to contact the registrar offices i pass thinking abuot i reply me illgo tomorow morning ..i can go back sorie ..but i count yuor
      post..

      1. Automotive ako corso mom and sir ill comr tomorro morning .?

  80. Avatar

    When Ang nc2 test sa baking and pastry and food production?

  81. Hello po good day..naay caregiving na course?

  82. Gusto ko mag enroll maam/sir electrical installation maintenance nc3

  83. Ma’am/sir.

    What is the available schedule for driving NC2 training?

    Thank you and God bless!

Leave a Reply

Your email address will not be published. Required fields are marked *

Tesda Courses © 2015 Privacy | Disclaimer | Terms of Use