Tesda Courses in Athena School Batangas City

T

Athena School for Technical and Vocational Advancement Batangas City is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Knowledge through education is the focus at Athena School for Technical and Vocational Advancement Inc.

There is a rising demand for skilled welders in various workplaces worldwide. And this is good news for Filipino welders seeking employment overseas.This demand for welders was confirmed by Filipino welders who are now employed at various oil and gas refineries and power plants in the Middle East. They also informed their compatriots of the good employment prospects for welders trained under ATHENA School for Technical and Vocational Advancement, Inc. located at Batangas City.

They added that this institution has spacious training shop and complete with different training equipment’s – a total of 25 welding booths which can accommodate a lot of trainees on one-on-one basis. No wonder why clients from principals in the Middle East, Korea, Australia and Canada choose to conduct their own trade testing inside the said school. In fact, this school has helped more than two thousand Filipinos who are now working in Saudi Arabia, Qatar, Russia, Australia, and Canada. Even one of the graduates wrote a letter to the school’s Managing Director to thank and acknowledge him for helping many Filipinos to be trained in welding with world-class skills and for landing on high-paying job abroad.

“We sincerely thank ATHENA School for trusting us and for training us. Now our economic and social status have improved through your skills development. Welders with GTAW qualifications are more in demand abroad and command higher pay. In fact, ATHENA School offers other technical courses that are also TESDA-accredited e.g. scaffold erection, rigging, millwright, among others.

You have heard it in the news. You have read it in the newspaper! Petro-mechanical/chemical companies are booming both locally and internationally. In this time of global economic crisis, highly skilled workers e.g. welders, pipefitters, quality inspectors, among others, helped this dynamic industry to grow and survive. Hence, they are paid high above everybody’s expectation.

Why don’t we join this selected group of skilled workers?

The first step in order to become one of these chosen few is to find the best technical/vocational school where you can be given the most effective and efficient quality training.

And we are proud to announce that the best school can already be found here in Batangas City

ATHENA School offers technical/vocational courses duly recognized by TESDA such as: Pipe Fitting NCII, Shielded Metal Arc Welding (SMAC) NCII, Gas Tungsten Arc Welding (GTAW) NCII, Scaffold Erection NCII, Rigging NCI, Millwrights, QC Structural Inspection, QC Piping Inspector, QC Welding Inspector.

Through internationally recognized training module and highly-competent instructors, ATHENA School will definitely bring out the best skilled worker. The school’s facilities are very spacious and well-equipped with all the supplies needed to complete all of the training courses.

So why travel far just to look for training schools when the best technical/vocational school is already here in Batangas City?

Why wait longer when the chance to improve our lives is already presented now?

BE A SKILLED WORKER! ENROLL NOW AT ATHENA SCHOOL!

Athena School for Technical and Vocational Advancement Batangas City

Address: Alangilan, Batangas City, Philippines
Telephone Number: (032) 505-3274 / 505-3269

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in Athena School for Technical and Vocational Advancement Batangas City in the province of Batangas.

List of Tesda Courses Offered / Registered Programs Duration
 Gas Metal Arc Welding (GMAW) NC II  354 Hours
 Gas Tungsten Arc Welding (GTAW) NC IV  294 Hours
 Instrumentation and Control Servicing NC II  238 Hours
 Pipefitting NC II  202 Hours
 Quality Assurance Control Pipe and Welding Inspection  168 Hours
 Rigging NC I  116 Hours
 Scaffold Erection NC II  162 Hours
 Shielded Metal Arc Welding (SMAW) NC II  268 Hours
 Shielded Metal Arc Welding (SMAW) NC IV  168 Hours

Basic Requirements for TESDA Courses:

  • At least 15 years of age
  • Copy of NSO Birth Certificate
  • Certificate of Good Moral Character from last school attended.
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number (032) 505-3274 or 505-3269. You can also visit Athena School for Technical and Vocational Advancement Batangas City. The assessment center is located at Alangilan, Batangas City, Philippines.


19 Comments

    • Good day ma’am/ Sir ask ko lang po if kailan schedule ng training for pipefitter nextyear at ano po requirements? Thank you po.
      Email add:ernestotorio47@yahoo.com

  • Good morning po ask ko lng po if how much ang magiging gastos ko if mgpapa assess po ako ng smaw nc4 at anu po b ang procedure ng assessment?thank you po…

  • Dear Mam/Sir
    Gusto ko po sana manguha ng training ng rigging nc1.Magkano po ba lahat ang kelangan at ano ano po ang mga kailangang requirements salamat po..

    Daren G. Mutuc
    09065576988
    Emaul: neradcutum@gmail.com

  • Gudam po,

    Maginquire lng po ako how much the fee for qc piping inspector,i cant reach your telephone,kindly send to my email if its possible.thank you

  • magandang umaga po, naghahanap po ako ng millwright kahit dalawa may 1yr experience. at gusto ko rin magpatraining ng millwright at qc welding inspector. tuwing kailan po ba ang training session ng mga ganitong curso, gaano katagal at magkano po?

  • Ma’am/Sir,

    I am a Rigger for 5 years now and i would like to take an assessment on Rigging NC I.

    Please inform me via e-mail or text if you have a schedule on Rigging NC I course including the requirements and fee.

    I am hoping for your response. Thank you very much.

    Regards,

    Marvin
    0908-997-8593

  • Dear Ma’am/Sir,

    I’ll the details above and full interesting. I would like to seek your assistance of complete details (mode of payments,availability – how many slot to proceed the session)for Quality Assurance Control Pipe and Welding Inspection Course, respect to this any direct e-mail or contact aside from above so,i can call directly for other details.

    Thank you very much too your generous assistance.

    Regards,
    Joel- 0999356-9152 (roaming)