AMG Skilled Hands Technological College

A

AMG Skilled Hands Technological College is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

AMG Skilled Hands Technological College (ASHTEC) is an institution that offers different technical courses, academic learning and Christian-oriented activities to underprivileged youths with its main goal that they gain better opportunities in life through relevant and excellent skills training. ASHTEC aims not only to help the poor but also build a strong relationship with God among its constituents.

AMG SHTCI, had its humble beginnings in a dilapidated warehouse on Commonwealth Avenue, with a lone trainer and five (5) male students, where they held classes under a tree. In 1997, the training center was blessed by God with a one hectare land in Barangay Makapilapil, San Ildefonso, Bulacan through the generous support of Woord en Daad, AMG Phillipines’ partner in the Netherlands.

At the run of the new millennium in 2001, SHTCI faced new challenges and began to expand. With its strategy to get skills instructors from it own program, it recruited twelve (12) instructors from auto mechanic and welding courses. Three departments were then formed – Admin, Training and Livelihood Departments. In 2002, Computer courses were also introduced as part of the Information technology (IT) Program. The Job and Business Center (JBC) was established in year 2005. JBC is an additional department in the Skilled Hands System that serves to provide placements to graduates in On-the-job training and employment. In 2005, AMG SHTCI revised its curriculum to make it more responsive to the job market. The four courses are now registered with TESDA, namely Automotive Technology, Computer Technology, Electronic Technology and Information Technology. In 2006, AMG SHTCI improved its training curriculum to 2-year courses. On the 23rd of June 2009, AMG Skilled Hands Training Center, Inc. changed its name to AMG Skilled Hands Technological College, Inc. with SO CN200262161. The school now offers Information and Communication Technology (ICT), Electronics and Communication Technology (ECT), Welding Technology (WT) and Diploma Course in Entrepreneurship (DCE).

AMG SHTCI has developed partnership over the years with different NGOs such as CCT, CMSP and Compassion International and local and multi-national companies (MNC) such as EEI Corp and Lexmark in Cebu for placement in On-the-Job Training (OJT) and employment of graduates. In 2007, AMG SHTCI inked a MOA with EEI Corp in the training of unemployed adults for deployment to their local and overseas projects. Presently there are more than 1,000 trainees who graduated in the partnership training and who now work in the Middle East.

With all of these blessings, AMG SHTCI can only thank the Lord for the privilege of being used by Him to help the poor and needy.

AMG Skilled Hands Technological College – San Ildenfonso

Address: Calayan Valley Road, Makapilapil, San Ildenfonso, Bulacan, Philippines
Telephone Number: (044) 901-1302 / 901-1328 / 9443262195

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in AMG Skilled Hands Training Center in the province of Bulacan.

List of Tesda Courses Offered / Registered Programs Duration Trainer
Shielded Metal Arc Welding (SMAW) NC II 268 hours Not indicated
Gas Metal Arc Welding (GMAW) NC II 268 hours Not indicated
Electrical Installation and Maintenance NC II 196 Hours Not indicated
Gas Tungsten Arc Welding (GTAW) NC II 268 hours Not indicated
Electronics Products Assembly and Servicing NC II 260 hours Not indicated
Technical Drafting NC II 222 hours Peter John Mangaco
Computer Systems Servicing NC II 280 hours Peter John Mangaco

AMG Skilled Hands Training Center – San Miguel, Bulacan

Address: Maharlika Highway, Salangan, San Miguel, Bulacan, Philippines
Telephone Number: (02) 4891065

List of Tesda Courses Offered / Registered Programs Duration
2D Animation NC III 840 hours
Computer Hardware Servicing NC II 1728 Hours
Computer Hardware Servicing NC II 392 hours
Computer Technology 1 Year
Consumer Electronics Servicing NC II 438 Hours
Consumer Electronics Servicing NC II 560 hours
Gas Metal Arc Welding NC II 268 hours
Programming NC IV 252 hours
Shielded Metal Arc Welding NC II 268 hours

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number (044) 901-1302 / 901-1328 / 9443262195. You can also visit AMG Skilled Hands Training Center. The assessment center is located at Maharlika Highway, Salangan, San Miguel, Bulacan, Philippines.


13 Comments

  • Im looking for BS animation course atleast two years. And kung free tuition poba and ano mga qualification and requirements for applying animation course. And kung may entrance exams po ba. Malapit po kase to sa amin kaya sana . Palarin ako.

  • Im looking for BS animation course atleast two years. And kung free tuition poba and ano mga qualification and requirements for applying animation course. And kung may entrance exams po ba.

  • Free tuition po ba kapag nag enroll and pano maka pasok. Ano mga qualification po para maka pasok. May exams po ba. Ano mga requirements po.

  • god morning po ask q lng po kung kaylan po ang enroll o kng myron pong driving
    my….number….09359493228

  • hi, goodday po ask ko lang kung anung course ang dapat kunin para sa electric welding, gas welding, lathe machine hiwa hiwalay ba sila ..salamat

  • gud day … ask ko lang po kung kelan start nung electronics servicing course…. willing po ako mag enroll tnx po