Regional Training Center IV-A Batangas is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Regional Training Center IV-A Batangas
Address: P. Herrera St., Batangas City, Philippines
Telephone Number: (043) 3000388
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in Regional Training Center IV-A Batangas in the province of Batangas.
List of Tesda Courses Offered / Registered Programs | Duration |
---|---|
Automotive Servicing NC II | 292 Hours |
Automotive Servicing NC II | 524 Hours |
Basic Benchwork Leading to Machining NC I | 218 Hours |
Basic Lathe Machine Operation Leading to Machining NC I | 84 Hours |
Basic Milling Machine Leading to Machining NC I | 84 Hours |
CNC Lathe Machine Operation NC II | 236 Hours |
CNC Lathe Machine Operation NC III | 234 Hours |
CNC Milling Machine Operation NC II | 236 Hours |
CNC Milling Machine Operation NC III | 234 Hours |
Consumer Electronics Servicing NC II | 438 Hours |
Electrical Installation and Maintenance NC II | 402 Hours |
Finishing Course for Call Center Agents NC II | 100 Hours |
Flux Cored Arc Welding (FCAW) NC I | 156 Hours |
Flux Cored Arc Welding (FCAW) NC II | 194 Hours |
Gas Metal Arc Welding (GMAW) NC I | 268 Hours |
Gas Metal Arc Welding (GMAW) NC II | 148 Hours |
Gas Tungsten Arc Welding (GTAW) NC II | 354 Hours |
Machining NC I | 374 Hours |
Machining NC II | 1,064 Hours |
Masonry NC II | 258 Hours |
Mechatronics Servicing NC II | 844 Hours |
Mechatronics Servicing NC III | 504 Hours |
Mechatronics Servicing NC IV | 464 Hours |
Medical Transcription (NC II) | 4 months |
Pipefitting NC II | 202 Hours |
RAC Servicing NC II | 226 Hours |
Refrigeration and Air-Conditioning Servicing | 142 Hours |
Shielded Metal Arc Welding (SMAW) NC I | 268 Hours |
Shielded Metal Arc Welding (SMAW) NC II | 304 Hours |
Trainer’s Methodology (TM) Level 1 | 264 Hours |
Basic Requirements for TESDA Courses:
- At least 18 years of age
- At least High School Graduate
- Copy of NSO Birth Certificate
- With good moral character
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school directly at telephone number (043) 3000388. You can also visit Tesda Courses in Regional Training Center IV-A Batangas. The assessment center is located at P. Herrera St., Batangas City, Philippines.
good day,
ask ko lang po kung anu po requirement ko if gusto ko po magkaron ng nc2 sa RAC,bale meron lng po akong certificate of training back in 1996 pa po,gusto ko rin po malaman kung how much po assestment at kailan po,
thanks
Tanung q po panu po aq makaka kuha ng nc2 for domestic helper.at san po aq pwd pumunta dito s batangas civy
hello po.. 2 years na po ako welder sa company pinapasukan ko at magaaply ako pa abroad kaso wala ako nc2.. kailangan ko pa po ba magtraining o pwede po bayaran ko nalang ung nc2 para makakuha ako.. kailangan na kailangan ko na po kc?? tnx sa reply
Hello Po,i just want to ask if you have a weekend training for welding then how much the tuition pay and also when is your schedule for enrollment or examination? Salam at Po and God bless.
I will just ask if you offer autocad training in batangas?Thank you!
Good day po.
Gusto ko/namin po mag take ng Finishing Course for Call Center Agents NC II in coming Summer vacation. Maari nyo po ba akong iinform about sa fees and requirements. Thank you po.
God bless!
Sir/man gusto ko po makakuha ng training para sa electrician and2 po kc ako sa abroad assistant electrician po ako gusto ko pong maimprove ang kaalaman ko at maging lesinsyadong electrician may training po ba na pwedeng isang buwan ko lng kunin,kc isang buwan lng bakasyon ko,sana po matulungan nyo ako, maraming salamat pi
Mam ask ko lang po if may bayad po pag mag enrol sa inyo . thanks po.
…may computer programming course po ba kayo?..thanks
Pde pa po ba humabol ngaun..kikunin ko po ung consumer electronics servicing…need ko po kc para makapagtech na ako..pm po..
Nakpagtraining na po ako tesda barista nga lg po since 2008..ask ko lg po allow pa rin po yung age ko 27…like ko po sana yung call center agents…thanks po
Ask ko lang po magkno po ba byad sa cargover training certificate po assessment po para certified po sa batangas Tesda po? Asap lang po. Di ko po mkita sa website po
Good afternoon po! Ask ko lang kung meron emergency skills training na pwede maging project sa aming barangay?
Panu po mkakuha ng authorization ng mga nag seminar pra Mkuha po ung certificate nmn. Nag seminar po Kc kme ng driving.
Please provide schedule and location for CNC Lathe /Millinh Machine Operation Training. Thank you & God Bless!
Good morning, ask ko lang po kung kailan ang assessment ng cnc lathe machine operation nc11 , meron po bang schedule ngayon May , Machine shop instructor po ako ng NTMA kailangan ko po ng CNC lathe machine operation NC11, ask ko rin po kung magkano ang tution fee nito. Thanks po
Good eve po ask ko lang po kung tumatangap pa po sa smaw at magkano po tuition at kung kailan start
gud pm po..my courses po ba kau n technician..mgkno po tuition at klan po ang enrolan. tnx po
Hi po!!! Ask ko lang po available po ba sa inyo ang instrumentation..within batangas area po ako..
Good day. Available po ba training sa food especially baking po… from batangas po ako.
Ask lang po kelan po enrollment ng pipe fitting at magkano po tuition ?.
Hi Sir/Ma’am
Ask lang po if may training kayo ng autocad? salamat 🙂
Good day po. Ask ko lang po kung naeexpired po ba yung training. Ibig ko po sabihin, kahit po ba matagal na nakapag training pwede pa din mag take ng NC2??
mam/sir kelan po ang pasukan sa EIM ?? at anu po ang requirements ??