Regional Training Center IV-A Batangas is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Regional Training Center IV-A Batangas
Address: P. Herrera St., Batangas City, Philippines
Telephone Number: (043) 3000388
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in Regional Training Center IV-A Batangas in the province of Batangas.
| List of Tesda Courses Offered / Registered Programs | Duration |
|---|---|
| Automotive Servicing NC II | 292 Hours |
| Automotive Servicing NC II | 524 Hours |
| Basic Benchwork Leading to Machining NC I | 218 Hours |
| Basic Lathe Machine Operation Leading to Machining NC I | 84 Hours |
| Basic Milling Machine Leading to Machining NC I | 84 Hours |
| CNC Lathe Machine Operation NC II | 236 Hours |
| CNC Lathe Machine Operation NC III | 234 Hours |
| CNC Milling Machine Operation NC II | 236 Hours |
| CNC Milling Machine Operation NC III | 234 Hours |
| Consumer Electronics Servicing NC II | 438 Hours |
| Electrical Installation and Maintenance NC II | 402 Hours |
| Finishing Course for Call Center Agents NC II | 100 Hours |
| Flux Cored Arc Welding (FCAW) NC I | 156 Hours |
| Flux Cored Arc Welding (FCAW) NC II | 194 Hours |
| Gas Metal Arc Welding (GMAW) NC I | 268 Hours |
| Gas Metal Arc Welding (GMAW) NC II | 148 Hours |
| Gas Tungsten Arc Welding (GTAW) NC II | 354 Hours |
| Machining NC I | 374 Hours |
| Machining NC II | 1,064 Hours |
| Masonry NC II | 258 Hours |
| Mechatronics Servicing NC II | 844 Hours |
| Mechatronics Servicing NC III | 504 Hours |
| Mechatronics Servicing NC IV | 464 Hours |
| Medical Transcription (NC II) | 4 months |
| Pipefitting NC II | 202 Hours |
| RAC Servicing NC II | 226 Hours |
| Refrigeration and Air-Conditioning Servicing | 142 Hours |
| Shielded Metal Arc Welding (SMAW) NC I | 268 Hours |
| Shielded Metal Arc Welding (SMAW) NC II | 304 Hours |
| Trainer’s Methodology (TM) Level 1 | 264 Hours |
Basic Requirements for TESDA Courses:
- At least 18 years of age
- At least High School Graduate
- Copy of NSO Birth Certificate
- With good moral character
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school directly at telephone number (043) 3000388. You can also visit Tesda Courses in Regional Training Center IV-A Batangas. The assessment center is located at P. Herrera St., Batangas City, Philippines.
good day,
ask ko lang po kung anu po requirement ko if gusto ko po magkaron ng nc2 sa RAC,bale meron lng po akong certificate of training back in 1996 pa po,gusto ko rin po malaman kung how much po assestment at kailan po,
thanks
Tanung q po panu po aq makaka kuha ng nc2 for domestic helper.at san po aq pwd pumunta dito s batangas civy
hello po.. 2 years na po ako welder sa company pinapasukan ko at magaaply ako pa abroad kaso wala ako nc2.. kailangan ko pa po ba magtraining o pwede po bayaran ko nalang ung nc2 para makakuha ako.. kailangan na kailangan ko na po kc?? tnx sa reply
Hello Po,i just want to ask if you have a weekend training for welding then how much the tuition pay and also when is your schedule for enrollment or examination? Salam at Po and God bless.
I will just ask if you offer autocad training in batangas?Thank you!
Good day po.
Gusto ko/namin po mag take ng Finishing Course for Call Center Agents NC II in coming Summer vacation. Maari nyo po ba akong iinform about sa fees and requirements. Thank you po.
God bless!
Sir/man gusto ko po makakuha ng training para sa electrician and2 po kc ako sa abroad assistant electrician po ako gusto ko pong maimprove ang kaalaman ko at maging lesinsyadong electrician may training po ba na pwedeng isang buwan ko lng kunin,kc isang buwan lng bakasyon ko,sana po matulungan nyo ako, maraming salamat pi
Mam ask ko lang po if may bayad po pag mag enrol sa inyo . thanks po.
…may computer programming course po ba kayo?..thanks
Pde pa po ba humabol ngaun..kikunin ko po ung consumer electronics servicing…need ko po kc para makapagtech na ako..pm po..
Nakpagtraining na po ako tesda barista nga lg po since 2008..ask ko lg po allow pa rin po yung age ko 27…like ko po sana yung call center agents…thanks po
Ask ko lang po magkno po ba byad sa cargover training certificate po assessment po para certified po sa batangas Tesda po? Asap lang po. Di ko po mkita sa website po
Good afternoon po! Ask ko lang kung meron emergency skills training na pwede maging project sa aming barangay?
Panu po mkakuha ng authorization ng mga nag seminar pra Mkuha po ung certificate nmn. Nag seminar po Kc kme ng driving.
Please provide schedule and location for CNC Lathe /Millinh Machine Operation Training. Thank you & God Bless!
Good morning, ask ko lang po kung kailan ang assessment ng cnc lathe machine operation nc11 , meron po bang schedule ngayon May , Machine shop instructor po ako ng NTMA kailangan ko po ng CNC lathe machine operation NC11, ask ko rin po kung magkano ang tution fee nito. Thanks po
Good eve po ask ko lang po kung tumatangap pa po sa smaw at magkano po tuition at kung kailan start
gud pm po..my courses po ba kau n technician..mgkno po tuition at klan po ang enrolan. tnx po
Hi po!!! Ask ko lang po available po ba sa inyo ang instrumentation..within batangas area po ako..
Good day. Available po ba training sa food especially baking po… from batangas po ako.
Ask lang po kelan po enrollment ng pipe fitting at magkano po tuition ?.
Hi Sir/Ma’am
Ask lang po if may training kayo ng autocad? salamat 🙂
Good day po. Ask ko lang po kung naeexpired po ba yung training. Ibig ko po sabihin, kahit po ba matagal na nakapag training pwede pa din mag take ng NC2??
mam/sir kelan po ang pasukan sa EIM ?? at anu po ang requirements ??
may tuition po ba ang Electrical Installation and Maintenance NC II at kelan po may traning.
Ask ko lang PO may offer PO b ngayon ng pipe fitter
good morning po kailangan po ba magpa schedule kung i ki claim yung NCII kasi 1 year na kaming tapos sa training namin hanggang ngayon po wala pa po ang aming cert. taga MYRIAD po ang training center na nag conduct pero under po ng TESDA kailangan po namin ang cert. mag aaply po ng work.
paki reply naman po.
Good day!inquire lang po ako kilan po start ng korean tutorial and panu po mag acquire thank you..
does anyone knows where can i found the basic training for call center indutry here in batangas city ?
saam po ang training center ng process inspection?
sir/ mam
good day po.. may housekeeping po ba kayong offer? this coming january 2017?
gud day po ..may free trainimg po b ng automotive this coming january 2017 .?tnx in ur response
Kelan po magkakaroon ng training or kelan magiging avilable ang scafolding? Meron po bang TESDA accredited traning center dito sa batangas? Salamat po
Meron ba kayong offer courses na hrm.louie po gusto ko po kasing mag-aaral.thank.
good day po,,magkano po tuition ng welder?
Magkano po tuition fee ng electrical and maintenance NCII at ano pp schedule ?
hi good evenin meron po ba kayong caregiving na course?
Meron po ba kayong training ng autocad or revit
Hi meron po ba kayong pang gabi ng schedule salamat po .
Hi,just a question po..nc2 passer po ako ng food and beverage services,i think 2009 if im not mistaken..libreng tesda po un in mabini,batangas..taga asiantouch international institute incorporated po ung trainor namin..pero d po namin nakuha ung original certfcate ng NC2..posible pa po bang makuha un.at marenew?thanks po
meron po bang dyang automotive mechanical assembly training!? thank you po
meron po b course n backhoe operator jan
Goodmorning po. Matanung ko lang po pwede po bang magenrol ngayong darating na July hanggang August ng Mechatronics? Salamat po.
Good day po sa inyo ask q lang po kung anong kurso ninyo na ari sa babae na tulad ko salamat po
Hi available po ba yung commercial cooking kailan po start ng klase salamat
hi po sir/ maam
kukuha po ako ng smaw nc1 nc2 .ask ko lng po if kelan ang sunod na schedule.para mapaghandaan ko.onboard pa po ako now.blak ko po pumasok pag baba ko.thank po.
Sir/Madam, ask ko lng po kung kailan start ng machining course diyan, kasi nagsubmit na po ako, ng requirements as long brown envelop,sinubmit ko, sa registry diyan, sabi tatawagan ako, kung kailan ako, mag enroll 4 followed up lng po? 09081309648
Mam/sir mag eenquire lang po sana kung kelan po mag kaka training tayu jan ng welder. Maraming salamat po…
Wala po kac ako makita dne sa site kung anuh ang darating na available course to train ..ty po
Hi.
good day po pwd po mag tanong kong kailan po mag start ang enrollment.
thanks po.
I’m interested about your courses .
I want to pay and study learned about more courses.thank you
Sir/Ma’am,
Good morning!
I want to enroll about CNC Milling Machine Operation NC II. I have a job right now. If given a chance, is there a class about the said course on Friday,Saturday or Monday?Any of the three day mentioned.
Thank you and more power.
hellow free po b mag enroll dito saka po kelan open ang welding thankyou
gud eve po ask ko lang po if my offer kayo na call center course sa june! willing po aq mag enroll salamat!!!
May course po bang HRM? Or food service related? Willing to enroll po. Thanks
Sir/ Madam may offer po ba kayong carpentry course? Thank you po and more power
Good Day po! Ask jo lng po kung may offer po kyo ngatin n electrical installation and maintenance nc11
May offer po bang programming NCIV ngayon pong summer
Offer po ba ang computer hardware servicing ngayong darating na pasukan???
may offer po ba kayong bookkeeping?
Gud day wla po b kau cooking or baking???
Kelan po enrollment dyn s batangas magenroll po sna q s callcenter course
May course po ba kayo na IT?
May schooling po bha kau this march na 7pm ang Simula?
May schooling po bha kau this march na 7pm ang Simula na welding or pipefitting ????
Meron po bang ahrm course sa tesda batangas
May offer po ba kayo sa autocad sa summer?
may wellding po ba yan…kaylan po ba ang umpisa…ok lang ba jan ang 17 kaylangan ko kase pumasok ehh
tanong ko lang po kung my oper po kayo ng electrician NC2?marami n po kc aq certificate at nagwowork n din po ako pero need ko po ng NC2.
Do you have a weekend schooling for Welding or Pipefitting? because I worked form Monday to Friday.
Thanks
Jing
Pwede p po bang mg inroll khit 35 years old n? kc po kaylangan ko po ng sartificate, 3 years n po kc ako nagwork s aircondition, technician n po ko ngaun, gusto ko po kc mg abroad
Do you have a weekend schooling for CNC Lathe Machine Operation NC II? Because now I have a job and I need to set this class for weekend.
Please advise
Thanks and best regards
Joey
Kailan po ba schedule ng free training for cnc milling this
December or
January 2016?
Do you offer courses for bilingual languages such as Mandarin and Spanish?
Thank you for your response.
Meron po ba kayong available na course “English Teaching”.. salamat
Hi good day, just want to ask some lists of your graduates who graduated from CNC Lathe, Milling machines who has an idea of this machines. Our company is located here in CPIP Batino and looking for an applicants here in our company who has a knowledgeable and operate CNC, lathe, grinding and milling any in this machines atleast know how to operate. Hope you can refer us some possible students from your side.
Thanks,