Tesda Courses in Regional Training Center – II (Tuguegarao)

Regional Training Center – II (Tuguegarao) is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Regional Training Center – II (Tuguegarao) – Cagayan

Address: Carig, Tuguegarao City, Cagayan, Philippines
Telephone Number: (078) 846-4224 / 0975 148 672 / (078) 396-1631 / 846-4224

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in Regional Training Center – II (Tuguegarao) in the province of Cagayan Valley.

List of Tesda Courses Offered / Registered Programs

Course Authorized Duration Trainer
Community-Based Trainers Methodology Course 64 hours Rogelio C. Rambuyan Edgar G. Dela Rosa
Contact Tracing Level II 180 hours(with 60 hours SIL) Edgardo D. Conde
Barangay Health Services NC II 663 hours (with 200 hours SIL) Edgardo D. Conde
Automotive Servicing NC II – Mobile Training Program 676 hours Joel Dominador C. Canapi
Driving NC II – Mobile Training Program 118 hours Emmanuel B. Clemente
Housekeeping NC II – Mobile Training Program 436 hours Jeanalyn B. Javier
PV Systems Servicing NC III – Mobile Training Program 308 hours (with 150 hours SIL) Rogelio C. Rambuyan
RAC Servicing (DomRAC) NC II – Mobile Training Program 480 hours Renato A. Quilang Louie A. Taguinod Paul C. Cristobal
Bread and Pastry Production NC II – Mobile Training Program 241 hours (with 100 hours SIL) Mae Angeline O. Orro
Electronics Products Assembly and Servicing NC II – Mobile Training Program 260 hours Rowel D. Cancejo
Carpentry NC II – Mobile Training Program 501 hours (with 200 hrs SIL) Pepe S Baculi
Masonry NC II – Mobile Training Program 331 hours (with 150 hrs SIL) Pepe S Baculi
Automotive Servicing NC I – Mobile Training Program 669 hours (with 200 hrs SIL) Arnel Yvan A. Indong Joel Dominador C. Canapi
Masonry NC II 181 hours + 150 hours SIL Pepe S. Baculi Oliver Y. Tumanguil
Carpentry NC II 301 hours + 200 hours SIL Pepe S. Baculi Oliver Y. Tumanguil
Automotive Servicing NC I 469 hours + 200 hours SIL Joel Dominador C. Canapi Arnel Yvann A. Indong
PV Systems Installation NC II – Mobile Training Program 484 hours (with 200 hours SIL) Rogelio C. Rambuyan Marc Ian A. Rambuyan
Bread and Pastry Production NC II 241 hours (with 100 hours SIL) Mae Angeline O Orro
PV Systems Servicing NC III 308 hrs. (with 150 hrs. SIL Rogelio C. Rambuyan
PV Systems Installation NC II 484 hrs. (with 200 hrs. SIL) Rogelio C. Rambuyan
Electrical Installation and Maintenance NC II – Mobile Training Program 196 hours Raffy A. Apil Rogelio C. Rambuyan Pepe S. Baculi
Shielded Metal Arc Welding (SMAW) NC II – Mobile Training Program 268 hours Robinson M.Concordia
Cookery NC II – Mobile Training Program 316 hours Marites O. Quilang
Motorcycle/Small Engine Servicing NC II – Mobile Training Program 650 hours Rolando U. Salvatera
Organic Agriculture Production NC II – Mobile Training Program 232 hours John Paul C. Balmedina
Organic Agriculture Production NC II 232 hours John Paul C. Balmedina
Driving NC II 118 Hours Not indicated
Automotive Servicing NC II 676 hours Not indicated
Electronics Products Assembly and Servicing NC II 260 hours Not indicated
RAC Servicing (DomRAC) NC II 480 hours Not indicated
Trainers Methodology Level I 264 hours Not indicated
Draft Architectural Lay-out & Details (Leading to Technical Drafting) 136 hours Not indicated
Draft Structural Lay-out & Details (Leading to Technical Drafting) 106 hours Not indicated
Shielded Metal Arc Welding (SMAW) NC II 268 Hours Not indicated
Housekeeping NC II 436 hours Not indicated
Cookery NC II 316 hours Marites O. Quilang Mae Angeline O. Orro
Electrical Installation and Maintenance NC II 196 Hours Pepe S. Baculi Rogelio C. Rambuyan Paul C. Cristobal
English Proficiency for Customer Service Workers/Providers 138 hours Lea R. Macababbad
Motorcycle/Small Engine Servicing NC II 650 hours Mark Anthony A. Romina
Automotive Servicing (Bundled Qualifications in Automotive Servicing NC I and Driving NC II) 274 hours Not indicated
Automotive Technology (Bundled Qualifications in Automotive Servicing NC II and Driving NC II) 794 hours Not indicated
Electrical and Electronics Technology (Bundled Quaifications in in Electrical Installation and Maintenance NC II and Electronic Products Assembly and Servicing NC II) 456 hours Not indicated
Electronics and Refrigeration Technology (Bundled Qualifications in Electronic Products Assembly and Servicing NC II and RAC Servicing (DomRac) NC II) 740 hours Not indicated
Hotel and Restaurant Services (Bundled Programs in Housekeeping NC II and Cookery NC II) 752 hours Not indicated
Welding and Masonry Technology (Bundled Programs in Shielded Metal Arc Welding NC II and Masonry NC II) 526 hours Not indicated

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number (078) 846-4224 / 0975 148 672 / (078) 396-1631 / 846-4224. You can also visit Regional Training Center – II (Tuguegarao). The assessment center is located at Carig, Tuguegarao City, Cagayan, Philippines.


147 Comments

Add a Comment
  1. San po ba ang mag-enroll sa tuguegarao?

  2. Available po ba ang course na caregiver?

    1. Please contact or visit the training center for more info

  3. archie jr gatan alcaraz

    Anung kors po yung butcher slamat

    1. Please visit the training center for more info

      1. Hello po sir ma’am available po ba Ang care giver coarse dto po sa tesda gusto ko pong mag aral for abroad po tnx po

        1. Please contact or visit the training center for more info

    2. Angelito Rey P. Dichoso

      Good Morning

      Tanong ko lang po kng pwd 1 month course ako kasi undergraduate ako ng diesel mechanic sa ilocandia technical school of electeonics ugac tuguegarao cagayan valley.kc gusto ko actual

      1. Please contact or visit the training center for more info

  4. ALAN TRINIDAD AGUSTIN

    my driving nc2 po ba at smaw sa itawes training center

  5. Open pa po baang enrollment nyo for css nc2?

  6. Good day po. Meron po ba kayong Hair and beauty care po kayong course?

  7. good day po maam/sir,ask ko lang po qng may swine technician course po kayo sa tesda
    salamat po sa pagsagot🙏

    1. Cagayan State University – Piat Campus
      Animal Production (Swine) NC II
      Baung, Piat, Cagayan
      09056779286 09163220105

      1. Hello po, kelan po ang schedule ng assessment for backhoe? Salamat po

        1. Please contact the training center for more info

  8. Good morning sir/ma’am
    Pwede po ba mag eenroll ng
    Tesda po course cookery po

  9. John lloyd tejano

    May barbering nc2 po ba sa tesda carig? Salamat❤️

  10. John Paolo Corpuz

    Hello po good day, tanong ko lang po kung open pa po yung Electronics Products assembly and Servicing?

  11. Mary Grace Sarah Andales Caronan

    Good day po mron po bang nursing aid.

  12. Sir may face to face poh pa kau na air conditioning and refrigerator
    At kailan ang enrolment thanks

  13. Edgar Jr. Columna Corpuz

    Mam/Sir goodmorning.Mayron po ba kayong assesment for Smaw? Thankyou and godbless

  14. Hi!Ma’am/Sir,good day po.Merron po ba kayong assessment NC2 for caregiving?

  15. Flordeliza C.Corales

    Hello po ma’am/ sir paano po mag enrol sa tesda ng household worker na puedeng makapagapply sa abroad na online po, sana matulungan po ninyo ako

  16. Krish Angel Arafiles

    Open po ba CSS
    Jan sa tesda Tuguegarao

  17. Krish Angel Arafiles

    Open po ba cssjan sa Tuguegarao

  18. How to register poeh??
    English proficiency.

  19. Paul michael barredo ebreo

    May butchery course poba kayo sa tuguegarao city..pls reply..

  20. Pwede po ba magenroll..cooker po

  21. klan po open or start ng enrollment nio sa caregiver

    1. Hi Open na po ba Caregiving? thank you amd Godbless

Leave a Reply to jesrael espiritu Cancel reply

Your email address will not be published. Required fields are marked *