Tesda Courses in Agusan Del Sur School of Arts and Trades (Prosperidad)

Agusan Del Sur School of Arts and Trades is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Agusan Del Sur School of Arts and Trades (Prosperidad)

Address: Gov’t Center, Patin-ay Prosperidad, Agusan del Sur, Philippines
Telephone Number: (085) 343-7709 / 343-7132

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in this TESDA Training Center in Agusan Del Sur.

 

List of Tesda Courses Offered / Registered Programs Duration
Automotive Servicing NC I 156 hours
Automotive Servicing NC II 676 hours
Beauty Care NC II 1,100 hours
Driving NC II 118 hours
Rice Machinery Operations NC II 232 hours
Carpentry NC II 301 hours
Consumer Electronics Servicing NC III 176 hours
Cookery NC II 316 hours
Dressmaking NC II 275 hours
Electrical Installation and Maintenance NC II 196 hours
Electrical Installation and Maintenance NC III 160 hours
Electrical Installation and Maintenance NC IV 516 hours
Electronics Products Assembly and Servicing NC II 260 hours
English Language Skills Training Program 100 hours
Furniture Making (Finishing) NC II 212 hours
Gas Metal Arc Welding (GMAW) NC II 268 hours
Gas Tungsten Arc Welding (GTAW) NC II 268 hours
Hairdressing NC II 1,096 hours
Masonry NC II 258 hours
Plumbing NC II 202 hours
Shielded Metal Arc Welding (SMAW) NC II 304 hours
Shielded Metal Arc Welding (SMAW) NC III 120 hours
Tile Setting NC II 82 hours
Trainers Methodology Level I 264 hours
Masonry NC II 181 Hours
Tile Setting NC II 117 Hours
Produce Organic Concoctions and Extracts Leading to Organic Agriculture Production NC II 125 Hours
Food Processing NC II 571 Hours
Construction Painting NC II 197 hours
Barangay Health Services NC II 563 hours
Contact Tracing Level II 120 hours
3- Year Welding Technology (Bundled Qualification in SMAW NC II, GMAW NC II, GTAW NC II, SMAW NC III) Not Available
3- Year Automotive Technology (Bundled Qualification in Automotive Servicing NC I/Automotive Servicing NC II) Not Available
3- Year Electrical Technology ( Bundled Qualification in EIM NC II/EIM NC III/ EIM NC IV) Not Available
“AUTOMOTIVE TECHNOLOGY (Bundled Program in: a) Automotive Servicing NC I b) Automotive Servicing NC II Not Available
“CIVIL TECHNOLOGY- Bundled Program in a) Tile Setting NC II b) Construction Painting NC II c) Furniture Making (Finishing) NC II” Not Available
“Electronics Technology-Bundled Program in: a) Electronics Products Assembly and Servicing NC II b) Consumer Electronics Servicing NC III Not Available
“Metals & Fabrication Technology-Bundled Program in: a) Shielded Metal Arc Welding (SMAW) NC II b) Gas Metal Arc Welding (GMAW) NC II c) Gas Tungsten Arc Welding (GTAW) NC II Not Available
“Metals & Fabrication Technology-Bundled Program in: a) Shielded Metal Arc Welding (SMAW) NC II b) Gas Tungsten Arc Welding (GTAW) NC II c) Shielded Metal Arc Welding (SMAW) NC III Not Available
“Metals & Fabrication Technology-Bundled Program in a) Shielded Metal Arc Welding (SMAW) NC II b) Gas Metal Arc Welding (GMAW) NC II c) Shielded Metal Arc Welding (SMAW) NC III Not Available
“Metals & Fabrication Technology-Bundled Program in: a) Automotive Servicing NC I b) Shielded Metal Arc Welding (SMAW) NC II” Not Available
Community-Based Trainers Methodology Course 48 hours

Basic Requirements for TESDA Courses:

  • At least 15 years of age
  • Copy of NSO Birth Certificate
  • Certificate of Good Moral Character from last school attended.
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school at telephone number (085) 343-7709 or 343-7132. You can also visit Agusan Del Sur School of Arts and Trades. The assessment center is located at Gov’t Center, Patin-ay Prosperidad, Agusan del Sur, Philippines.


44 Comments

Add a Comment
  1. Good day po? Ask lang po kung may slot na po ang sa EIM NC2 po?. Kailan po schedule po? Maraming salamat and god bless po.

    1. Please contact or visit the training center for more info

  2. Glece Ben E Apolinario

    Good pm maam/sir
    Ask lng ku for renewal sa aku NCII sa EIM .by slot mu maam when ang schedule ?

    1. Please visit the training center for more info

    2. Rowena G. Divinagracia

      Good evening sir/ma’am,i just would like to inquire on when will be the start of classes of driving NC II. I submitted my requirements june 2023.

      1. Please contact or visit the training center for more info

  3. Naa bay free tesda training for caregiver?

    1. Para sa available TESDA course at scholarship program sa inyong lugar, makipag-ugnayan lamang po sila sa TESDA office sa inyo.
      Pwede rin po kayong magregister online sa https://bsrs.tesda.gov.ph/ para makapag-apply sa mga TESDA scholarship programs.
      Magtungo din sa link na ito: https://www.e-tesda.gov.ph/ para makapag-aral ng mga libreng course online.

  4. Good noon ma’am/sir,naa bay caregiver training nga offer Ani?

  5. Goodnoon Po ma’am/sir ask lang naa bay computer Gina offer ninyo sa tesda?

  6. Diony capote jognac

    Kanus a Ang assessment sa gtaw sir, kinahanglanon onta nko kaayo ba Kay balik kog abroad.

  7. Christian John miñoza

    Good day … Ask lng Po…kilan ulit may available free tesda training??? Salamat Po…

  8. Ma’am sir ask po Sana ako kailan schedule ng NC2?

  9. Mark Vincent M. Calderon

    saan po tayo mkapag tesda para po heavytruck driver?

  10. NORA AMESTOSO DORIA

    Good day evryone. Ask lang po kailan po ba magstart ang klase ng SMAW? nagpa enrol na po kasi anak ko noong buwan ng Marso. Ang sabi po tatawagan nalang kami kung mag umpisa na ang klase. Ngunit hanggang ngayon wala pa rin.

  11. Maaung Gabie.
    ask lang ko if available pa ba ang course sa automotive NCII. gusto unta ko mag skwela.
    Daghan salamat.

  12. Magandang araw maam and sir
    Regarding po sa driving course
    Ninyo mag schedule po ba kayo next month of June

  13. Hi good day! do yopu have available courses this month?

  14. Hello po may schedulle po tesda nitong taon 2021?at magkano po bayad sa registration,at ilang month bago matapos ,yong dressmaking po atsaka sa salon

  15. Good day po.. ask lng ko., Naa mo assessment sa driving for nc2
    . Salmat ug God bless.

    1. Good day po, ask lang ko kanus’a enrollment sa Cookry NCll po? And magkano po yong tuition fee po?

      Salamat and God Bless.

  16. Ask ko lng PO nc.holder nko sa senior high dressmaking . Now graduate nko gusto ko mag tEsda og gusto nko ipadayon Ang pagpanahi unsa ako angay BUhaton plsssss tambagi ko.

  17. good day po. open po ba css nc2 training, kailan po enrollment?

  18. Jovelyn Martin Blanco

    Good morning po!magtatanung lng po kailan po magsisimula ang session ng dressmaking course?kng nkpag simula na kailan na po ang next batch? Maraming slamat po!

  19. sir puydi ask kung kailan mag simula ang hairdresser course

  20. sir/ma’am ask lang ko kong when mag start ang enrollment sa welding course?

  21. sir/maam ask lang ko ug when mag start ang endrolment sa wildeng nc11

    1. Good day ma’am /sir.
      Naa bay offer diria sa bayugan tesda driving nc2? Salamat sa maka response.

    2. Maam.and sir inform kolang po patin.ay tisda po may available driving school ba sa NCII

  22. Good day ma’am, sir. Pwede mag inquire kung kailan magsisimula ang training ng Shielded Metal Welding NCII? At kung kailan din po ang schedule ng enrollment. Salamat po.

    1. Hello po may schedulle po tesda nitong taon 2021?at magkano po bayad sa registration,at ilang month bago matapos ,yong dressmaking po atsaka sa salon

  23. Alyanaricks Escalante

    Good noon po pwede po mag inquir for cosmetology if meron po kayo din kailan ang starting.

    1. Ask ko lang po,kung mayron ba kayong free online course ng virgin coconut oil processing.

  24. CHERYL VALLECER BANTILAN

    Good Morning Sir/Madam,

    I would like to ask the Schedule of English Skills Training Program and the payment.

    Hoping for your response. Thank you and God Bless.

    Cheryl Vallecer Bantilan

  25. Cheryl merin-lagmay

    Hello gud morning,ask ko lang poh pwede po ba palitan yung apelyedo dun sa certificate ko,mag abroad sana ako kaso ayokong gamitin yung apelyedo nang asawa ko matagal na kasi kaming hiwalay.

  26. conny marie gines plaza

    Good day po.. Ano po bang mga requirements for enrollment.. Dressmaking po sana kukunin ko..

  27. nikki dela cerna

    Good day po.Ask lng po kung kailan po schedule assessment ng GTAW?

  28. Hi gsto ko mag endroll sa commercial cooking ncII, ask lng ko if ,what time and pila ka oras ang klasse and then unsa nga adlaw ang klasse ,.hulat ko sa reply salamat…godbless.

  29. Ano po ba ang schedule ng dressmaking ? At kailan ang enrolment.

  30. Good day po meron pa po ba kyong dressmaking training? At ano po mga schedule?

  31. Good day po. ask ko lng po f pwd mgpa assess sa Furniture Making (finishing) NC II?

    1. Gd day sir/maam.naa ba moy available course sa electrical? Gusto ta ko mag enrol para NC11.kanus a n u schedule sa enrollment.thank you.

  32. Good day ask lang ug daily mag attend sa hair dressing makuha ba in 3months lang

  33. GoodDay mam/sir naa ba schedule ang hairdressing MWF ky gsto mn gud ko pa enroll unya layo amoa trento agusan.gkan nko dnhaa nag inquir ug requirments. thank you

Leave a Reply to Jeffrey Jay guillen Cancel reply

Your email address will not be published. Required fields are marked *