TESDA TRAINING REGULATIONS FOR SHIELDED METAL ARC WELDING (SMAW) I
The TESDA Course in Welding NC I (SMAW) consists of competencies that a person must achieve to weld carbon steel plates components as specified by layout, blueprints, diagrams, work order, welding procedure or oral instructions using SMAW welding equipment.
This Qualification conforms with AWS D 1.1 Structural Welding Code; ASME IX Boiler and Pressure Vessel Code; API 1104 Code for Gas and Oil Pipeline Facilities; and ISO 9606-1 Qualification of Welders for Steel.
A student who has achieved this Course in SHIELDED METAL ARC WELDING (SMAW) I is competent to be:
- Plate Welder (SMAW)
SHIELDED METAL ARC WELDING (SMAW) I – TRAINING AND REGULATION MODULE
Course Title: SHIELDED METAL ARC WELDING (SMAW)
Level: NC I
Nominal Training Duration :
(Basic Competency) 28 Hours
(Common Competency) 56 Hours
(Core Competency) 184 Hours
Total Training Duration 268 Hrs.
This course is designed to enhance the knowledge, skills and attitudes in Shielded Metal Arc Welding in accordance with industry standards. It covers core competencies such as Setting-up Welding Equipment, Preparing Weld Materials, Fitting up Weld Materials, Welding Carbon Steel Plates Using SMAW and Repairing Welds.
TRAINEE ENTRY REQUIREMENTS
Trainees or students wishing to gain entry into this course should possess the following requirements:
- can communicate either oral and written
- physically and mentally fit
- with good moral character
- can perform basic mathematical computation
COMPETENCIES REQUIRED IN SHIELDED METAL ARC WELDING (SMAW)
This units of competency comprising this qualification include Basic, Common and Core Competencies. To obtain this course, all units prescribed for this qualification must be achieved.
UNIT CODE | CORE COMPETENCIES (184 Hours) |
---|---|
MEE721301 | Weld Carbon Steel Plates Using SMAW |
UNIT CODE | COMMON COMPETENCIES (56 Hours) |
MEE721201 | Apply Safety Practices |
MEE721202 | Interpret Drawings and Sketches |
MEE721203 | Perform Industry Calculations |
MEE721204 | Contribute to Quality System |
MEE721205 | Use Hand Tools |
MEE721206 | Prepare Weld Materials |
MEE721207 | Setup Welding Equipment |
MEE721208 | Fit up Weld Materials |
MEE721209 | Repair Welds |
UNIT CODE | BASIC COMPETENCIES (28 Hours) |
500311101 | Receive and respond to workplace communication |
500311102 | Work with others |
500311103 | Demonstrate work values |
500311104 | Practice basic housekeeping procedures |
This section gives the details of the contents of the core units of competency required in SHIELDED METAL ARC WELDING (SMAW) I. These units of competency are categorized into basic, common and core competencies.
CORE COMPETENCIES
UNIT OF COMPETENCY : Weld Carbon Steel Plates Using SMAW
UNIT CODE : MEE721301
This unit covers the skills, knowledge and attitudes in welding carbon steel plates using SMAW process.
- Perform root pass
- Root pass is performed in accordance with WPS and/or client specifications.
- Task is performed in accordance with company or industry requirement and safety procedure.
- Weld is visually checked for defects and repaired, as required
- Weld is visually acceptable in accordance with applicable codes and standards
- Clean root pass
- Root pass is cleaned and free from defects and discontinuities
- Task is performed in accordance with approved WPS
- Weld subsequent/filling passes
- Subsequent/ filling passes is performed in accordance with approved WPS
- Weld visually is checked for defects and repaired, as required
- Weld is visually acceptable in accordance with applicable codes and standards
- Perform capping
- Capping is performed in accordance with approved WPS and/or client specifications
- Weld is visually checked for defects and repaired, as required
- Weld is visually acceptable in accordance with applicable codes and standards
COMMON COMPETENCIES
UNIT OF COMPETENCY : APPLY SAFETY PRACTICES
UNIT CODE : MEE721201
This unit covers the competencies required to apply safety practices in the workplace.
- Identify hazardous area
- Hazards are identified correctly in accordance with OHS principles.
- Safety signs and symbols are identified and adhered to.
- Use protective clothing and devices
- Appropriate protective clothing and devices correctly selected and used in accordance with OHS requirements or industry/company policy
- Perform safe handling of tools, equipment and materials
- Safety procedures for pre-use check and operation of tools and equipment followed in accordance with industry/ company policies.
- Tools, equipment and materials handled safely in accordance with OHS requirements and industry/ company policies.
- Perform first aid
- First aid treatment of injuries are carried out according to recommended procedures
- Use fire extinguisher
- Fire extinguisher selected and operated correctly according to the type of fire.
UNIT OF COMPETENCY : INTERPRET DRAWINGS AND SKETCHES
UNIT CODE : MEE721202
This unit covers the competencies required to read and interpret drawings and sketches.
- Identify standard alphabet of lines
- Alphabet of lines are identified Uses of the alphabet of lines are explained
- Identify orthographic/isometric views
- Orthographic and isometric drawing are identified
- Orthographic and isometric views are explained
- Interpret standard drawing symbols, dimensional tolerances and notations
- Drawing symbols are interpreted according to drawing standards
- Dimensional tolerances, notations are interpreted according to specifications
UNIT OF COMPETENCY : PERFORM INDUSTRY CALCULATIONS
UNIT CODE : MEE721203
This unit covers the competencies required to perform basic calculations using the four fundamental operation.
- Perform four fundamental operations
- Simple calculations involving whole numbers, mixed numbers, fraction and decimal are performed using four fundamental operations.
- Perform conversion of units
- Units are converted to the required figure using the given formulae
- English measurements are converted to metric measurements according to procedure.
- Perform calculations on algebraic expressions
- Simple calculations are performed on algebraic expressions using four fundamental operations.
- Simple transposition of formulae are carried out to isolate the variable required, involving the four fundamental operations.
- Where appropriate, formulae are constructed to enable problems to be solved.
- Equations involving on unknown solved correctly.
- Compute percentage and ratio
- Percentages are computed using appropriate formula.
- Ratio and proportion are computed using appropriate formula.
UNIT OF COMPETENCY : CONTRIBUTE TO QUALITY SYSTEM
UNIT CODE : MEE721204
This unit involves competence required to inspect work against specification and standards and apply quality standards to work.
- Inspect work done
- Appropriate inspections are conducted to ensure company quality systems and procedures are maintained/ followed.
- Job specifications/work order and quality standards are identified.
- Faults/Defects are identified and rectified according to company procedures.
- Apply quality standards to work
- Inspections are conducted throughout the manufacturing processes to ensure quality standards are maintained.
- Appropriate quality standards are applied throughout the production/fabrication process.
- All activities are coordinated throughout the workplace to ensure efficient quality work outcomes.
- Records of work quality are maintained according to the company requirements.
- Protect company property and customer interests
- Possible damage to company property is avoided by adherence to company quality procedures.
- Quality of work is reviewed to ensure customer requirements and company standards are met.
UNIT OF COMPETENCY : USE HAND TOOLS
UNIT CODE : MEE721205
This unit covers the competencies required to use hand tools.
- Select hand tools
- Hand tools selected are appropriate to the requirements of the task.
- Unsafe or defective tools are identified and marked for repair according to procedure.
- Use hand tools
- Hand tools are used to produce the desired outcomes to job specifications.
- Task performed in accordance with company or industry safety procedure.
- Maintain hand tools
- Routine maintenance of hand tools is undertaken according to standard operating procedures, principles and techniques.
- Hand tools are stored in designated location in accordance with manufacturer’s instruction/standard operating procedure.
UNIT TITLE : PREPARE WELD MATERIALS
UNIT CODE : MEE721206
This unit covers the skills, knowledge and attitudes in preparing welding materials.
- Set up cutting equipment
- Cutting equipment should be operational and should conform to acceptable OH&S standards
- Appropriate for operation intended
- Cut and prepare edge of materials
- Materials are cut to specified dimension/specifications.
- Task performed in accordance with company or industry requirements and safety procedure.
- Clean surfaces and edges
- Surfaces are cleaned to required specifications.
- Task performed in accordance with company or industry requirements and safety procedure
- Prepare welding consumables
- Consumables are prepared in accordance with required specifications
- Recommended manufacturer’s instructions are observed
- Prepare welding safety and protective equipment
- PPE should conform to acceptable OH&S requirement and standards
UNIT TITLE : SET UP WELDING EQUIPMENT
UNIT CODE : MEE721207
This unit covers the skills, knowledge and attitudes in preparing equipment for welding.
- Set up welding machine
- Requirements for welding is determined from job requirements, welding procedures and specifications and/or technical drawings.
- Welding machine is set up in accordance with job requirements, welding procedures and specifications, technical drawings and manufacturer’s instructions.
- Welding machine should be connected to an independent power supply and wired up or set to the polarity indicated in the welding procedures/specifications or as recommended by the manufacturer.
- Current and voltage fine-tuned or adjusted consistent with job requirements to produce acceptable weld.
- Task is completed without causing damage to the tools, equipment and materials and injury to self and others.
- Set up welding accessories
- Welding machine accessories and consumables are identified from job requirements, welding procedures and specifications.
- Welding machine accessories and consumables are set up in accordance with job requirements, welding procedures and specifications and/or manufacturer’s instructions.
- Set up welding positioners, jigs and fixtures
- Braces, stiffeners, rails and other jigs are provided and in conformity with job requirements.
- Work items/materials are protected from strong winds, drafts and rainfall
- Set up pre-heating tools/equipment as required
- Pre-heating equipment appropriate to the job requirement and specifications
- Equipment operated in conformance with the manufacturer’s instructions.
UNIT TITLE : FIT UP WELD MATERIALS
UNIT CODE : MEE721208
This unit covers the skills, knowledge and attitudes in fitting up welding materials.
- Perform tack welding
- Tack welding performed in accordance with the requirements of WPS and client’s specifications.
- Tack weld visually and dimensionally acceptable.
- Tack on root for pipe or as required.
- Backing plate, stiffener, running plate installed as required.
- Joints are free from rust, paints, grease and other foreign materials prior to fit up or tacking.
- Check gap and alignment
- Root gap is performed in accordance with the requirements of WPS.
- Alignment within the range of acceptability of code and standard.
- Fitted materials visually free from stresses
- Set up welding positioner
- Weld specimen positioned and secured according to the requirements.
UNIT TITLE : REPAIR WELDS
UNIT CODE : MEE721209
This unit covers the skills, knowledge and attitudes in repairing welds.
- Mark/locate weld defects
- Identified weld defects marked/located according to recommended practice
- Prepare tools and equipment
- Tools and equipment prepared are appropriate to the job requirements including the provision of wind barriers.
- Task performed in accordance with company or industry requirements and safety procedure
- Remove defects
- Weld defects removed/excavated in accordance with approved industry procedures or client requirements.
- Removal of non-defective welds is minimized and cleaned.
- Visual and dye-penetrant test performed to verify the extent of removal of defects, where applicable
- Welding inspector informed to verify the extent of defect removal.
- Task performed in accordance with company or industry requirement and safety procedure
- Perform re-welding
- Re-welding performed in accordance with approved repair procedure.
- Task performed in accordance with company or industry requirement and safety procedure
- No new weld defects or damages occurred during re-welding.
- Weld visually checked after re-welding for acceptability
BASIC COMPETENCIES
UNIT OF COMPETENCY : RECEIVE AND RESPOND TO WORKPLACE COMMUNICATION
UNIT CODE : 500311101
This unit covers the knowledge, skills and attitudes required to receive, respond and act on verbal and written communication.
- Follow routine spoken messages
- Required information is gathered by listening attentively and correctly interpreting or understanding information/instructions
- Instructions/information are properly recorded
- Instructions are acted upon immediately in accordance with information received
- Clarification is sought from workplace supervisor on all occasions when any instruction/information is not clear
- Perform workplace duties following written notices
- Written notices and instructions are read and interpreted correctly in accordance with organizational guidelines
- Routine written instruction are followed in sequence
- Feedback is given to workplace supervisor based on the instructions/information received
UNIT OF COMPETENCY : WORK WITH OTHERS
UNIT CODE : 500311102
This unit covers the skills, knowledge and attitudes required to develop workplace relationship and contribute in workplace activities.
- Develop effective workplace relationship
- Duties and responsibilities are done in a positive manner to promote cooperation and good relationship
- Assistance is sought from workgroup when difficulties arise and addressed through discussions
- Feedback provided by others in the team is encouraged, acknowledged and acted upon
- Differences in personal values and beliefs are respected and acknowledged in the development
- Contribute to work group activities
- Support is provided to team members to ensure workgroup goals are met
- Constructive contributions to workgroup goals and tasks are made according to organizational requirements
- Information relevant to work is shared with team members to ensure designated goals are met
UNIT OF COMPETENCY : DEMONSTRATE WORK VALUES
UNIT CODE : 500311103
This unit covers the knowledge, skills, and attitude in demonstrating proper work values.
- Define the purpose of work
- One’s unique sense of purpose for working and the why’s of work are identified, reflected on and clearly defined for one’s development as a person and as a member of society.
- Personal mission is in harmony with company’s values
- Apply work values/ethics
- Work values/ethics/concepts are classified and reaffirmed in accordance with the transparent company ethical standards, policies and guidelines.
- Work practices are undertaken in compliance with industry work ethical standards, organizational policy and guidelines
- Personal behavior and relationships with co-workers and/or clients are conducted in accordance with ethical standards, policy and guidelines.
- Company resources are used in accordance with transparent company ethical standard, policies and guidelines.
- Deal with ethical problems
- Company ethical standards, organizational policy and guidelines on the prevention and reporting of unethical conduct are accessed and applied in accordance with transparent company ethical standard, policies and guidelines.
- Work incidents/situations are reported and/or resolved in accordance with company protocol/guidelines.
- Resolution and/or referral of ethical problems identified are used as learning opportunities.
- Maintain integrity of conduct in the workplace
- Personal work practices and values are demonstrated consistently with acceptable ethical conduct and company’s core values.
- Instructions to co-workers are provided based on ethical, lawful and reasonable directives.
- Company values/practices are shared with co-workers using appropriate behavior and language.
UNIT OF COMPETENCY : PRACTICE HOUSEKEEPING PROCEDURES
UNIT CODE : 500311104
This unit covers the knowledge, skills and attitudes required to apply the basic housekeeping procedures.
- Sort and remove unnecessary items
- Reusable, recyclable materials are sorted in accordance with company/office procedures
- Unnecessary items are removed and disposed of in accordance with company or office procedures
- Arrange items
- Items are arranged in accordance with company/office housekeeping procedures
- Work area is arranged according to job requirements
- Activities are prioritized based on instructions.
- Items are provided with clear and visible identification marks based on procedure
- Safety equipment and evacuation passages are kept clear and accessible based on instructions
- Maintain work area, tools and equipment
- Cleanliness and orderliness of work area is maintained in accordance with company/office procedures
- Tools and equipment are cleaned in accordance with manufacturer’s instructions/manual
- Minor repairs are performed on tools and equipment in accordance with manufacturer’s instruction/manual
- Defective tools and equipment are reported to immediate supervisor
- Follow standardized work process and procedures
- Materials for common use are maintained in designated area based on procedures
- Work is performed according to standard work procedures
- Abnormal incidents are reported to immediate supervisor
- Perform work spontaneously
- Work is performed as per instruction
- Company and office decorum are followed and complied with
- Work is performed in accordance with occupational health and safety (OHS) requirements
DEFINITION OF TERMS
- base metal – the metal that is to be worked or welded
- weld bead – a deposit of filler metal from a single welding pass
- weld defect– an irregularity that spoils the weld appearance or impairs the effectiveness of the weld or weldment by causing weakness or failure
- weld line – the junction of weld metal and the base metal, or the junction of base metal parts when filler metal is not used
- weldment – an assembly or structure whose component parts are joined by welding
- welding – joining two metals by applying heat to melt and fuse them, with or without filler metal
- welding electrode – the current-carrying rod used to strike an arc between rod and metal
- welding rod – filler metal in the form of a rod or heavy wire
- welding torch –a gas mixing and burning tool for the welding of metal
saan po may welding courses dito sa pangasinan?
Barlo Technical Institute Training and Assessment Center, Inc.
Bolaney, Alaminos City, Pangasinan
(075) 637-4437
BTSC- Bayambang Training Skills Center Inc.
77 Speaker Perez Street Zone VII (Pob.) Bayambang, Pangasinan
9334342479
Career Builder Skills Training and Assessment Center Inc.
Barangay Cablong, Pozorrubio, Pangasinan
(075) 636-8567 09173170939
Central Asia Institute of Modern Technology, Inc.
Tambac, Malasiqui, Pangasinan
09239304566/ 09213073348
Chessington Right Form Skills Training Institute of Science and Technology, Inc.
160 Pandayan Gabon, Calasiao, Pangasinan
9985672182/ 0927 175 5263
CMV Technical Institute, Inc.
009 National highway, Brgy. Tangcarang, Alaminos City, Pangasinan
(075) 210-2077 09277309171 09778028410
Delos Reyes Online Advance Skills Training Center Inc.
033 Centro Casanicolasan, Rosales, Pangasinan
9184634103
Era De Guzman Technical and Educational Center Incorporated
#23 Sitio Baybay Bueno, Mangatarem, Pangasinan
09173822772 09171382774
Far East Maritime Academy & Technological Corp.
No. 26, Brgy. Cayanga, San Fabian, Pangasinan
(075) 529-1623
FCG Skills & Training Center, Inc.
Umangan, Mangatarem, Pangasinan
9127389715
FCG Skills & Training Center, Inc.
Umangan, Mangatarem, Pangasinan
9127389715
Haddison Technical Training and Educational Center Inc.
#467 Tapuac District, Dagupan City, Pangasinan
(075) 600-3267
Konstrukt Training and Assessment Center Inc. (Branch)
126 FQ Duque Rd., Tapuac, Dagupan City, Pangasinan
9690456994
Luciano Millan Memorial School of Arts and Trades
Poblacion West, Asingan, Pangasinan
(075) 563-2971
Manantan Institute of Science and Technology – Binalonan, Inc.
Sumabnit, Binalonan, Pangasinan
(075) 531-1608/562-7189
Mang Maxi’s Integrated Farm Training and Assessment Center Inc.
Sitio Riverside, Ninoy, Aguilar, Pangasinan
0908-864-4552
Mangaldan Technical Institute, Inc.
No. 11 P. De Guzman St., Bari, Mangaldan, Pangasinan
075-615-0953
Marian Educational Center of Malasiqui, Inc.
35 Bonifacio St., Malasiqui, Pangasinan
(075) 772-1974/ 09215182842
MSTTAC Modern Skills Technical Training and Assessment Center, Inc.
Balingasay Road, Barangay Concordia, Bolinao, Pangasinan
09997656740/ 09171208624 09090707090
NJ Valdez Colleges Foundation, Inc.
Brgy. Bacag, Villasis, Pangasinan
(075) 564-5054 / 3061
Osme International Skills and Training Academy, Inc.
# 274 Cawayan Bogtong, Malasiqui, Pangasinan
9189300339
Pangasinan School of Arts and Trades
Alvear St. West, Lingayen, Pangasinan
075-662-2077 / 075-633-0933 075-523-5284
Pangasinan Technological Institute
San Isidro Norte, Binmaley, Pangasinan
09086867548 (075) 529-0477
PHILGERMA Manufacturing, Inc.
No. 147 New Diversion Rd., Bued, Calasiao, Pangasinan
(075) 522-0437 / 517-5258
Positif Technical Training School Incorporated
Asan Norte, Sison, Pangasinan
9167515886
Prime Brilliant Minds Academy Inc.
Mc Arthur Highway, Lucao District, DagupanCity
9274487500
Provincial Training Center – Pangasinan
Capitol Compound, Lingayen, Pangasinan
(075) 542-4989
Provincial Training Center – Pangasinan
Capitol Compound, Lingayen, Pangasinan
(075) 542-4989
Provincial Training Center – Pangasinan
Capitol Compound, Lingayen, Pangasinan
075-542-4989
Provincial Training Center – Urdaneta
Brgy Anonas, Urdaneta City, Pangasinan
075-529-2524
Quintinians Technical Vocational School, Inc.
Rizal St., Poblacion Zone 1, San Quintin, Pangasinan
075-633-2930 09209385173 075-633-2939
RG Skills International Training and Assessment School Inc.
98 Pardo de Tavera Santo Nino, Binalonan, Pangasinan
(075) 658-4662
School of Technical Knowledge and Assessment Center Inc.
Zone 6 San Vicente, Santa Maria, Pangasinan
0961-887-7880
Señor Tesoro College Inc.
Diversion Road, Brgy. San Miguel, Calasiao, Pangasinan
(075) 517-3534/ 522-8575/ 5224928
Skills Solution Training and Assessment Center Inc.
Purok 6, Lucao, Dagupan City
9260540817
St. Isidore Training and Assessment Center Inc.
Poblacion, Dasol, Pangasinan
9237253644
St. Raymund de Peñafort Technical and Skills Training Institute, Inc.
Ponglo-Muelag, Mangatarem, Pangasinan
0918-316-1067
Sta. Catalina’s College of Science and Technology, Umingan Branch, Inc.
2F Delos Santos Bldg., Brgy. Caurdanetaan, Poblacion East, Umingan, Pangasinan
(075) 513-7183/ 09989972025
Sual Livelihood and Skills Training Center
Poblacion Sual, Pangasinan
(075) 548-8031
Meron ba SMAW NC1 dito sa Las Piñas?
Not available
Meron po ba SMAW NC1 dito po sa Los Banos Laguna ngayong 2024? How to enroll po?
PESO-CAESAR Los Baños Manpower Skills Training Center
Gabaldon Bldg., Timugan, Los Baños, Laguna
(049) 5365976
Trace College Inc.
El Danda St., Batong Malake, Los Baños, Laguna
(049) 536-3944
Paano po mag enroll para sa SMAW NC I dito sa Rosario,Cavite?
Please contact or visit the training center for more info
is there available in camarines sur, naga area?
Burabod Nin Paglaom Inc.
Zone 5, Burabod 2, Pamplona, Camarines Sur
Camarines Sur Institute of Fisheries and Marine Sciences – Main Campus
Sta. Rosa del Norte, Pasacao, Camarines Sur
(054) 513-9148 09618083038
Camarines Sur Institute of Fisheries and Marine Sciences – Minalabac Campus
Hobo, Minalabac, Camarines Sur
(054) 513-9148
IConnect Global Institute, Inc.
Poblacion Central, Ocampo, Camarines Sur
9091419190
Kolping Society Philippines, inc.
Baras, Canaman. Camarines Sur
Kolping Society Philippines, inc.
Baras, Canaman, Camarines Sur
Mariners’ Polytechnic Colleges Foundation of Canaman (Cam. Sur), Inc.
Baras, Canaman, Camarines Sur
(054) 4739726 4744330
Provincial Training Center – Libmanan
Bahay, Libmanan, Cam. Sur
(054) 511-9223
Ragay Polytechnic Skills Institute
Poblacion, Ilaod, Ragay, Camarines Sur
9175004432
Regional Training Center – V (Pili)
Zone 9, San Jose, Pili, Camarines Sur
(054) 477-7204 / 361-2788 ‘099994476626
Mwron po ba course na available ngayong 2024 sa tagoloan region X?
Please inquire below:
BSBT College, Inc.
434 Magsaysay Avenue, Baguio City
(074) 442-2986
NorthPhil Polytechnic Institute, Inc.
03 Benitez Compound, Lower Magsaysay, Baguio City
(074) 244-1429
TESDA-Cordillera State Institute of Technical Education, Main Campus
#80 Military Cut-off, Baguio City
(074)424-8723/ 8724
How 2 enroll her at dasmarinas city cavite
Please inquire below:
PTS College & Advanced Studies Inc.
Carlos Trinidad Ave., Salitran IV, Dasmariñas City, Cavite
(046) 512 4941
TESDA Provincial Training Center – Paliparan
TESDA Provincial Training Center – Paliparan, Brgy. Paliparan II, Dasmariñas, Cavite
(046) 456 5429
How to enroll here in Iloilo?
Don Bosco Boy’s Home and Vocational Training Center Inc.
P.D. Monfort South, Dumangas, Iloilo
33-3612500
ESTANCIA Training and Assessment Center Inc.
Pani-an 5th District, Estancia, Iloilo
8736-8510
John B. Lacson Foundation Maritime University (Molo), Inc.
M.H. del Pilar St., Molo, Iloilo City
336-5449 / 337-3860 / 337-7538
KRYZ Vocational & Technical School (KVTS) – Bingawan Campus
Brgy. Cairohan, Bingawan, Iloilo
0908-9289284
Leon Ganzon Polytechnic College
Brgy. Maya, Balasan, Iloilo
33970915/Fax 3971108/3971159
Mina Skills Training Center
Rizal St., Mina, Iloilo
530-9225/530-9263
New Lucena Polytechnic College
Don Epifanio Sonza Sr. Avenue, New Lucena, Iloilo
33-3300001 / 396-0563/ 396-0562/ 3967900
Passi Trade School
Bgy. Sablogon, Passi City
311-5451/311-5420
Provincial Training Center – Iloilo
Brgy. Bolong, Este, Sta. Barbara, Iloilo
315-3096
How to enroll po pleasee
Please visit the training center to enroll
Available po ba ngayon ang smaw sa dasmarinas cavite?
Please inquire below:
PTS College & Advanced Studies Inc.
Carlos Trinidad Ave., Salitran IV, Dasmariñas City, Cavite
(046) 512 4941
TESDA Provincial Training Center – Paliparan
TESDA Provincial Training Center – Paliparan, Brgy. Paliparan II, Dasmariñas, Cavite
(046) 456 5429
Bacolod area po
Atoniya Skills Education, Inc.
WRB Building, Lot 17 Blk. 7, Greenplains 2 Subdivision Bangga Yap, Singcang-Airport, Bacolod City
445-5241
JFLM MULTI-SKILLS TRAINING AND ASSESSMENT CENTER CORPORATION
Purok 4, Poblacion, Bacolod Lanao del Norte
9956319326
John B. Lacson Colleges Foundation (Bacolod), Inc.
Alijis, Bacolod City, Negros Occidental
9225884879
Master Global Education & Livelihood Inc.
Tokoname Bldg., Magsaysay Ave., Brgy. Singcang, Bacolod City
34-7073530 / 34-7073533 mastergled@gmail.com
Master Global Education & Livelihood Inc.
Tokoname Bldg., Magsaysay Ave., Brgy. Singcang, Bacolod City
34-7073530 / 34-7073533 mastergled@gmail.com
Mirai Empower Foundation Corporation
Lot 799-B-1-J, Brgy. Sum-ag, Bacolod city, Negros Occidental
(034) 2132557
NFSP Sugar Workers Foundation, Inc.
Bacolod-Murcia Road, Alijis, Bacolod City
433-9031/433-9033
Philippine Organized Workforce For Economic Recovery Foundation (POWER Foundation),Inc.
Marapara Heights, Brgy. Bata, Bacolod City
343-2161
VMA Global College and Training Centers, Inc.
Earl Carol St., Sum-ag, Bacolod City
34-4442565/ 34-4441092/ 34-4441588/ 34-4440123
VMA Global College and Training Centers, Inc.
Earl Carol St., Sum-ag, Bacolod City
34-4442565/ 34-4441092/ 34-4441588/ 34-4440123
baka po meron manila na may free voucher din po gusto ko po magaral salamat po
Para sa available TESDA course at scholarship program sa inyong lugar, makipag-ugnayan lamang po sila sa TESDA office sa inyo.
Pwede rin po kayong magregister online sa https://bsrs.tesda.gov.ph/ para makapag-apply sa mga TESDA scholarship programs.
Magtungo din sa link na ito: https://www.e-tesda.gov.ph/ para makapag-aral ng mga libreng course online.
May scholarship po ba ng SMAW NC1 around Marikina or Antipolo City
Para sa available TESDA course at scholarship program sa inyong lugar, makipag-ugnayan lamang po sila sa TESDA office sa inyo.
Pwede rin po kayong magregister online sa https://bsrs.tesda.gov.ph/ para makapag-apply sa mga TESDA scholarship programs.
Magtungo din sa link na ito: https://www.e-tesda.gov.ph/ para makapag-aral ng mga libreng course online.
San po pede mag avail NG smaw nc1 near po stay Rosa laguna
Santa Rosa Manpower Training Center
BSRV-1 Brgy. Tagapo, City of Santa Rosa, Laguna
508-0392
AFQ Weldtek Inc.
9022 F. Reyes St., Purok 6, Balibago, Santa Rosa, Laguna
(049) 503-6770 / 09399209291
sir saan po pwede mag enroll ng training course around malolos area po tenx po
Bulacan Polytechnic College
Bulihan, Malolos, Bulacan
(044) 662-1853/ 09233742667 Fax: (044)791-30-48
City of Malolos Training Center
Sitio Umboy, San Agustin, City of Malolos, Bulacan
044-794-3630
good day sir! meron po ba training around pasig city ng smaw1?
MFI Polytechnic Institute, Inc.
MFI Bldg., Ortigas Ave., Barangay Ugong, Pasig City
8632-0756 to 67 / 8634-4970
PASIG CITY INSTITUTE OF SCIENCE AND TECHNOLOGY
Pio Alvarez St. , Bambang Pasig City
8706-7977
Good day po. San pi pede mag enroll ng welding pasay area.
Not available in Pasay
Hello po. San po may available na training center for welding dito sa Merville Paranaque? Thanks po
Grand Training and Assessment Center, Incorporated
Block 2, Lot 1 Gigatech Bldg. 1 Duhat Mon El Subdivision, San Antonio, Parañaque City
9258459514
International Training for Enhancement & Assessment Center Inc.
52 Iphor Bldg. Doña Soledad Ave., Brgy. Don Bosco, Bicutan, Parañaque City
738-8450
Stars and Rainbow Academy, Inc.
RECRAA Bldg., Vitalez Cmpd., Sucat, Paranaque City
826-81-69/ 825-7956 loc. 50/ 826-8169 fax
San po meron dito sa alabang, munti or laguna area po.
Christ the King College of Science and Technology, Inc.
2/F Jaysons Bldg., #12 National Road, Putatan, Muntinlupa City
775-7132 / 862-6930
Autozone Driving School Inc.
Old National Highway, Brgy. Nueva, City of San Pedro, Laguna
9774612350
Jacobo Z. Gonzales Memorial School of Arts and Trades
Brgy. San Antonio, Biñan, Laguna
(049) 511-8059 /511-9409
Hi. Saan po mga dito sa cebu city or lapu lapu city ang malapit na TESDA accredited school sa welding po sana? Sana po mgreply. Salamat
Not available lapu lapu
Good day! Saan po pwede mag enroll ng welding sa navotas po?
Philippine Welding Technology Skills & Services Center Inc.
586 Gov. Pascual St. San Roque Navotas City
270033824
MAM/SIR
magandang araw po ahm Tanong ko lng po available po bah Yung SMAW/GMAW
SA Cainta Rizal
mag te training na po Kase Ako e
salamat po
Please inquire below:
Central Rizal Institute of Technology, Inc.
1024 Felix Ave., Brgy. Sto. Domingo, Cainta, Rizal
02-8875-7567/ 503-6485/ 0995-333-0595
good day po may bayad po ba yung training?
Yes
San po meron tesda dito sa Angeles City Pampanga?
J.C.E Advance Technical School and Assessment Center, Inc.
#5 Debra St., Mt View, Balibago, Angeles City, Pampanga
(045)458-2302/ (0905)1528503/ (0949)7229499
Good evening. San Po pwede mag enroll? Kalibo Aklan Po sana.
Northwestern Training Center Inc.
16 Jaime Cardinal Sin., Estancia, Kalibo, Kalibo (Capital) Aklan
9192469279
Gbood day po. saan po pwde mag enroll ng SMAW I dito sa Quezon City po? Ano din po mga requirements?
Bright Future Skills Training and Assessment Center Inc.
Block 10 Lot 6 Emerald St., Millionaires Village, Novaliches Proper, Quezon City
7955-0875
Center for Barista and Tourism Academy Training and Assessment, Inc.
3/F Lot 13-A, Blk. 31 cor. Camaro St., Fairview Ave., Fairview, Quezon City
8671-0001
Electron College of Technical Education Corporation
No. 664 Electron Bldg., Quirino Highway, Bagbag, Novaliches, Quezon City
418-2232 / 352-0081 / 703-0878
Electron Technical Training Center, Inc.
Electron Bldg., Quirino Highway, Bagbag, Novaliches, Quezon City
418-2232 / 352-0081 / 703-0878
Integrated Innovation and Hospitality Colleges, Inc.
Buenamar Subdivision, Buenamar Drive, Brgy. Novaliches Proper, Novaliches, District 5, Quezon City
417-0952
Labor-Link Technical Institute Corporation
112 Old Samson Rd. Balintawak, Quezon City
413-9073/ 4120337/ 3715995/ 4113804/ 4150960 /4108265
Miesha Training Academy and Assessment Center, Inc.
Bonanza Bldg. II, Block 1 Lot 6 Hilltop Subd., Putol na Daan St., Greater Lagro, Quezon City
09494508000 / 751-6420
Mt. Charmel Science and Technical Institute Inc.
789 Quirino Hiway, Gulod, Quezon City
401-7603/ 09228745828
Samson College of Science and Technology, Inc.
587 EDSA, Cubao, Quezon City
FAX 723-1648/ 721-4129/ 414-6429/ 414-6430/ 414-6431
Samson College of Science and Technology, Inc.
587 EDSA, Cubao, Quezon City
FAX 723-1648/ 721-4129/ 414-6429/ 414-6430/ 414-6431
St. Peter Velle Technical Training Center, Inc.
No. 919 Aurora Blvd., Cubao, Quezon City
4441939/ 738-7442
Xavier Technical Training Center Corp.
A & B Quirino Highway corner Tansinco Drive Greenfields I Subd., Brgy. Kaligayahan Novaliches, Quezon City
990-5086/ 781-4852
Meron po bang SMAW NC1 around north caloocan, sjdm bulacan or quezon city? Puro po kasi NC2 yong nakikita ko sa mga schools. yong free po sana haha.
Global Center of Education Management Science and Technology Corp.
7 Cabatuhan Road, Deparo, Bgy.168, Caloocan City
9063437290 / 83762230
Horizons Institute of Technology Corporation
No. 1569 Rizal Ave. Cor. 10th Ave. Grace Park West, Barangay 62, Caloocan City
426-8591
Integrated Innovation and Hospitality Colleges, Inc.
Lots 1 and 2, Block 11, Nissan St., Zabarte Road Extension, Brixton Ville Subdivision, Brgy. 175, Camarin Caloocan City
9198934789 / 77549645 / 7956-6594
St. Francis Technical Institute Center for Development, Training and Competency Assessment, Inc.
No. 0030 Zapote St. PHHC Camarin Area-D Camarin Road, Caloocan City
8285-3297
Welding Industries of the Philippines, Incorporated
No. 111 Baesa Road, Caloocan City
8362-7581-82 LOC 134
May available po ba sa valenzuela?
Dynamic Christian School of Technology, Inc.
No. 84-A to 86-D McArthur Highway, Marulas, Valenzuela City
293-03-32
Globe Maritime Training Center – Manila, Inc.
Cielo Azul, G. Salazar St., Wawang Pulo, Valenzuela City
02 83614297
Globe Maritime Training Center – Manila, Inc.
Cielo Azul, G. Salazar St., Wawang Pulo, Valenzuela City
02 83614297
Philippine School for Technology Development and Innovation Inc.
Corner De Leon Street., Purok 1-A Kabatuhan Street, Mapulang Lupa, Valenzuela City
(02) 750-3718 / 0948-885-5576 / 0967-961-8965
St. Peter Velle Technical Training Center, Inc.
No. 92 P. Mc Arthur Highway, Marulas, Valenzuela City
293-9636
Valenzuela City Polytechnic College
Kamagong St. Fortune Vill. 6, Parada, Valenzuela City
292-0480/ 293-07-75/ 8556-4056
Meron po ba sa Angeles City Pampanga ?
J.C.E Advance Technical School and Assessment Center, Inc.
#5 Debra St., Mt View, Balibago, Angeles City, Pampanga
(045)458-2302/ (0905)1528503/ (0949)7229499
thank you po sa reply..
meron pa po ba dito sa pandi bulacan training welding
Not available in Pandi