ATEC Technological College – Sta. Rita Branch

ATEC Technological College is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

ATEC Technological College – Bulacan

Address: 184 San Diego Bldg., Sta. Rita, Guiguinto, Bulacan, Philippines
Telephone Number: 044-794-0542 / 306-1404 / 044  690-7705/ 760-3189 / 09179090501

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in ATEC Technological College in the province of Bulacan.

List of Tesda Courses Offered / Registered Programs Duration Trainer
Agricultural Crops Production NC II 435 hours (including 80 hours SIL) Evalyn DC Vicmudo
Rigging NC I 185 hours (including 40 hours SIL) Dante B. Jardin
Agricultural Crops Production NC I 302 hours Evalyn DC. Vicmudo
Heavy Equipment Operation (Truck Mounted Crane) NC II 162 hours Felipe Bronio
Heavy Equipment Operation (Forklift) NC II 200 hours Felipe Bronio
Heavy Equipment Operation (Hydraulic Excavator) NC II 216 hours Felipe Bronio
Heavy Equipment Operation (Hydraulic Excavator) NC II – Mobile Training Program 216 hours Felipe F. Broño Jr.
Heavy Equipment Operation (Truck Mounted Crane) NC II – Mobile Training Program 162 hours Felipe F. Broño Jr.
Heavy Equipment Operation (Forklift) NC II – Mobile Training Program 200 hours Felipe F. Broño Jr.
Shielded Metal Arc Welding (SMAW) NC II 268 Hours Not indicated
Hairdressing NC II 1096 Hours Not indicated
Beauty Care NC II 1060 Hours Not indicated
Bookkeeping NC III 292 hours Not indicated
Computer Systems Servicing NC II 280 hours Not indicated
Electronics Products Assembly and Servicing NC II 260 hours Not indicated
Dressmaking NC II 275 Hours Not indicated
Dressmaking NC II – Mobile Training Program 275 Hours Arlyn Analiza K. Oquendo
Shielded Metal Arc Welding (SMAW) NC II – Mobile Training Program 268 Hours Herel L. Perez
Electronics Products Assembly and Servicing NC II – Mobile Training Program 260 hours Edgardo R. Santiago
Driving NC II 118 hours Charlene Serpa Juan
Hilot (Wellness Massage) NC II 120 hours Rosita M. Quiambao
Hilot (Wellness Massage) NC II – Mobile Training Program 120 hours Rosita M. Quiambao

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number 044-794-0542 / 306-1404 / 044  690-7705/ 760-3189 / 09179090501. You can also visit ATEC Technological College. The assessment center is located at Sta. Rita, Guiguinto, Bulacan, Philippines.


16 Comments

Add a Comment
  1. Charles Raymond Cruz

    Mam,Sir I would like to inquire for TM 1.

  2. charles jayson herolaga

    MAm sir paanu po ba yung pre assestment saka derecho nc2 na poba pag nag SMAW po ako ., Salamat po

  3. Good morning po ma’am gosto ko po kasing maging isang trainor paano po ba ano po ang step by step..

  4. Good eve maam / sir welder po may pang gabi po ba kau plss chat me

  5. Hi mam/sir okey lng po ba mag enrol khit hndi highschool grad..undergrad po kc aq salamat po..

  6. Can i join if i fail my sejarah?

  7. Good afternoon! I just want to inquire, what NCII course is fitted for BEEd. I badly need it for ranking as teacher applicant. How much will be the cost, how many weeks/months is the training? And most importantly, if you have Saturday and Sunday schedule as I am a regular employee in the company. Thank you in advance! I’m hoping for your soonest reply.

  8. Good day po sir/ ma’am
    Mag inquire po sana ako if may pang sabado kayong electrical course mag training po sana ako.need po ko po kasi mag training ng electrical pumapasok po ako dswd monday to friday kaya po dto ako nkapag inquire ng training n rin po ako sa Rac dati batch 2008 kay sir jerry faustino pa email nmn po ako salamat po

  9. George if you were asking for tuition fee I can tell you a bit,my nephew is currently enrolled at that TRAINING CeNTER right now,I guess it depends what course would you take,but believe me or not tuition fee are expensive,you will end up paying more thang 10k or 17k per year and also you will pay some extra for something that they want you to purchased with them.go to regular school you will pay less and learn more.

  10. Do you have night class? If there is I will enroll ……? Thanks pls reply

  11. An update, they have now the Visual Graphic Design NCIII. You may also contact them at (044)794-0542.

    1. George R. Sandoval Jr.

      may i ask sir if its for free or has a training fee hope for response thank you

  12. hiring po kayo mg instructor? computer system services NC II passer po ako at EIM NC II passer po.

  13. Sir/Maam,
    Pano po ung pre training assestment??? San po kukunin o gagawin un??

  14. hi, I would like to ask the schedule is it possible Saturday and Sunday class

  15. Do you have course for motorcycle repair NCII? What’s the schedule of the said course?

Leave a Reply to Elmer Cancel reply

Your email address will not be published. Required fields are marked *