Regional Training Center – X (Tagoloan)

Regional Training Center – X (Tagoloan) is an institution accredited by TESDA that offers Technical and Vocational Education and Training Courses (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Regional Training Center – X (Tagoloan)

Address: PHIVIDEC Tagoloan, Misamis Oriental, Philippines
Telephone Number: (08822) 742426

TESDA Approved Programs

List of TESDA Courses offered in Regional Training Center – X (Tagoloan)

TEC-VOC Course Offered Duration
Gas Tungsten Arc Welding (GTAW) NC II 386 hours
Gas Metal Arc Welding (GMAW) NC II 80 Hrs.
Machining NC II 338 hours
Shielded Metal Arc Welding (SMAW) NC I 268 hours
RAC Servicing (DomRAC) NC II 480 hours
RAC Servicing (PACU/CRE) NC III 226 hours
Shielded Metal Arc Welding (SMAW) NC II 268 Hours
Computer Systems Servicing NC II 280 hours
Technical Drafting NC II 206 hours
Shielded Metal Arc Welding (SMAW) NC II – Mobile Training Program 268 hours
Driving NC II 118 hours
Produce Organic Vegetables leading to Organic Agriculture Production NC II 106 hours
Produce Organic Concoctions and Extracts Leading to Organic Agriculture Production NC II 106 hours
Electrical Installation and Maintenance NC III 160 hours
Agricultural Crops Production NC II 336 hours
Masonry NC II 181 hours
Basic English Language 100 hours
Masonry NC II – Mobile Training Program 181 hours
Barangay Health Services NC II with Contact Tracing Level II 535 hours
Contact Tracing Level II 120 hours
Food Processing NC II 552 hours
Electrical Installation and Maintenance NC II 196 hours
Construction Painting NC II – Mobile Training Program 178 hours
Construction Painting NC II 178 hours
Driving NC II – Mobile Training Program 118 hours
Produce Organic Concoctions and Extracts Leading to Organic Agriculture Production NC II – Mobile Training Program 106 hours
Produce Organic Vegetables Leading to Organic Agriculture Production NC II) – Mobile Training Program 106 hours
Industrial RAC Technology (Bundled Qualifications in Pipefitting NC II and RAC ( PACU/CRE) Servicing NC III) 428 hours
Metal Technology (Bundled Qualifications in Shielded Metal Arc Welding NC I and Machining NC II) 428 hours
RAC and Computer Systems Technology (Bundled Qualifications in Computer Systems Servicing NC II and RAC (Domestic RAC) Servicing NC II) 760 hours
Metal Fabrication Technology (Bundled Qualifications in Shielded Metal Arc Welding NC II, Pipefitting NC II and Technical Drafting NC II) 676 hours
Gas Welding Technology (Bundled Qualifications in Gas Metal Arc Welding (GMAW) NC II, Gas Tungsten Arc Welding (GTAW) NC II) 466 hours
Arc Welding Technology (Bundled Qualifications in Shielded Metal Arc Welding (SMAW) NC II, Gas Tungsten Arc Welding (GTAW) NC II) 654 hours
Electrical Installation and Maintenance NC II – Mobile Training Program 196 hours
Shielded Metal Arc Welding (SMAW) NC I – Mobile Training Program 268 hours
Agricultural Crops Production NC II – Mobile Training Program 336 hours
PV Systems Installation NC II 284 hours
PV Systems Installation NC II – Mobile Training Program 284 hours
Masonry NC I 123 hours
Masonry NC I – Mobile Training Program 136 hours

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

To enroll in TESDA courses, please contact the school directly at telephone number (08822) 742426. You can also visit Regional Training Center – X (Tagoloan). The assessment center is located at PHIVIDEC Tagoloan, Misamis Oriental, Philippines.


33 Comments

Add a Comment
  1. Hi po good day, I would like to inquire the photovoltaic tesda course, when the class started and still have available slot?

    1. Please contact or visit the training center for more info

  2. Adriel John M. Mamba

    Good day po, magtatanong lang po sana ako kung kailan ang start ng training po ng Electrical Installation and Maintenance NCIII at ano ano po ang requirements na dapat isubmit?

    1. Please contact or visit the training center for more info

  3. Pwede hs level maka enroll

    1. Please contact or visit the training center for more info

      1. Pwede pa maka enroll? Or when inyong ting enroll nasad

        1. Please contact or visit the training center for more info

  4. Good morning.. inquire lang ko pila ang tuition sa Gtaw og Gmaw.

    1. Please contact or visit the training center for more info

    2. Pwde ko mangayo og contact number sir? Layo mangud amoa. If mg visit pko sa school

  5. Christine Pil Paglinawan

    Do you offer manicure pedicure course

  6. Naa bay offer sa tesda ka massage course? Please reply maam/sir thank you.

  7. updated ni mam/sir? ng. inquir mn gud me wla may GMAW available daw. nibyahe pa mi ug layo from Oroquieta City to Tagoloan.. dli sad matawagan ang number. hopefully magpost mo ug contact details kana sad ma access.ty

  8. Good pm, Maam/Sir pwedi ba mka enrolled sa inung course college undergraduate tapos 4th year high school rko taman Kai nag ALS ko.

    1. Good day mam/sir kanusa inyung enrollment sa GTAW mam/sir? Og pila inyung tuition mam/sir😊

    2. Maam unsay date kaha balik sa nc2 sa smaw

  9. Maam/sir unsay requirements sa smaw para maka enroll sa tesda? Taga jasaan rako

  10. Ma’am / sir,
    good am taga balingasag ko unsa ang requerments sa ipasa sa tesda mama/sir.

  11. I want to keep updated by your new course offering and when is the available date of enrollment.

    1. Mac Daniel L. Caboco

      Maam/sir meron ba kayong automotive sa tesda?

  12. Good day maam/sir,
    When is the next batch of elect. Installation and maintenance NCIII?

  13. Gudafternoon Maam/Sir kanus-a ang next batch para sa DOMRAC..ug palihog sa requirements.tnx

  14. Pwede ra online application?

  15. Hello po Ma’am/Sir, Gusto ko mag apply, Asa pwede magpa enroll?

  16. Hello and good morning.
    How to enrolled po?

  17. Jomar Laride Pascual

    Goodmorning sir na available sir ??

  18. apple jiene brion

    good day! maam/sir, pwde pa mag pa enroll? driving NC2 og GTAW NC2? cagayan de oro diay ko. thank you po!

  19. Santiago Labarro jr

    How to apply ? Or what is need or requirements to apply ? How much is tuition to be paid ? Is there any free tuition. ? I know how to operate heavy equipment’s like backhoe but I don’t have nc11 I can’t still use my skill with the certificate ..

  20. francis ian naelga

    hi po naa ba mo forklift operator na course ? thanks.

    1. Naa inyo fod and beverages services nc2 salamatv

  21. Good morning Maam/Sir mag ask unta ko,unsay latest ninyo karon nga course.tnx

  22. lorabel jekk c. elbambo

    hi ma’am/sir good afternoon ! pwedi pa mag enroll taga balingasag rako.
    thanks .!

Leave a Reply to Jomar Laride Pascual Cancel reply

Your email address will not be published. Required fields are marked *