Regional Training Center Talisay is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Regional Training Center Talisay
Address: Felipe Lacson St., Talisay City, Negros Occidental, Philippines
Telephone Number: 495-2457 / 495-1033 / 34-4952457 / 34-4951033; 474-2135
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in “Regional Training Center Talisay” in the Province of Negros Occidental.
List of Tesda Courses Offered / Registered Programs
| Course Authorized | Duration |
|---|---|
| Shielded Metal Arc Welding (SMAW) NC II | 304 Hours |
| Shielded Metal Arc Welding (SMAW) NC I | 268 Hours |
| Heavy Equipment Operation (Bulldozer) NC II | 216 Hours |
| Heavy Equipment Operation (Forklift) NC II | 216 Hours |
| Heavy Equipment Operation (Hydraulic Excavator) NC II | 216 Hours |
| Heavy Equipment Operation (Wheel Loader) NC II | 216 Hours |
| Machining NC I | 374 Hours |
| Machining NC II | 337 Hours |
| Carpentry NC II | 162 Hours |
| Driving NC II | 118 Hours |
| Trainers Methodology Level I | 264 Hours |
| Cookery NC II | 316 Hours |
| Computer Systems Servicing NC II | 280 Hours |
| Electronics Products Assembly and Servicing NC II | 260 Hours |
| Automotive Servicing NC I | 156 Hours |
| Automotive Servicing NC II | 676 Hours |
| Construction Painting NC II | 178 Hours |
| Landscape Installation and Maintenance (Softscape) NC II | 212 Hours |
| Automotive and Fabrication Services (Bundled Qualifications: Automotive Servicing NC I and Shielded Metal Arc Welding NC I | Not Available |
| Welding and Pipefitting Services (Bundled Qualifications: Shielded Metal Arc Welding NC I, Shielded Metal Arc Welding NC II and Pipefitting NC II) | Not Available |
| Civil Construction Services (Bundled Qualifications: Masonry NC II and Carpentry NC II) | Not Available |
| Construction Services (Bundled Qualifications: Tile Setting NC II and Construction Painting NC II) | Not Available |
| Heavy Equipment Operations and Services (Bundled Qualifications: Heavy Equipment Operation (Backhoe Loader) NC II, Heavy Equipment Operation (Bulldozer) NC II and Heavy Equipment Operation (Mechanical) NC II) | Not Available |
| Machining Services (Bundled Qualifications: Machining NC I and Machining NC II) | Not Available |
| Auotmotive Services (Bundled Qualifications: Automotive Servicing NC I and Automotive Servicing NC II) | Not Available |
| Computer and Electronic Services (Bundled Qualifications: Computer Systems Servicing NC II and Electronic Products Assembly and Servicing NC II | Not Available |
| Automotive and Driving Services (Bundled Qualifications: Automotive Servicing NC I and Driving NC II) | Not Available |
| Computer with Mobilization Services (Bundled Qualifications: Computer Systems Servicing NC II and Driving NC II) | Not Available |
| Heavy Equipment Operations (Bundled Qualifications: Heavy Equipment Operation (Forklift) NC II and Heavy Equipment Operation (Hydraulic Excavator) NC II) | Not Available |
Basic Requirements for TESDA Courses:
- At least 18 years of age
- At least High School Graduate
- Copy of NSO Birth Certificate
- With good moral character
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school directly at telephone number 495-2457 / 495-1033 / 34-4952457 / 34-4951033. You can also visit Regional Training Center Talisay. The assessment center is located at Felipe Lacson St., Talisay City, Negros Occidental, Philippines.
Good am, maam,sir my available .electronic product assemble serving or code ELC724336 at pwde po mag apply nang training po ma’am ,sir ito no .09454525040
Please contact or visit the training center for more info
tapos na po ako mag register sa bsrs.. paano po ako maka pag apply sa scholarship?
How much is the fee for the welding courses?
Hello good afternoon Tanong ko lang po pwdi ba mag assessment dito sa talisay city ng caregiver for nc2 naka pag training na po ako .
goodmorning may caregiver course po? salamat
tapos tanong ka dito ng tanong sa website nila wala namang sumasagot.. mga walang kwenta talaga! ineffective!
free ba ang courses sa tesda? if not, bakit hindi nyo pinopost magkano ang tuition fee? para may ideya naman yung naghahanap! kailangan ba talagang tumawag pa or pumunta oa talaga sa office nila? halos lahat ngayon digitalized or online na pero itong tesda napag iwanan pa ata.. transparency na lang sana sa mga information..
Para sa available TESDA course at scholarship program sa inyong lugar, makipag-ugnayan lamang po sila sa TESDA office sa inyo.
Pwede rin po kayong magregister online sa https://bsrs.tesda.gov.ph/ para makapag-apply sa mga TESDA scholarship programs.
Magtungo din sa link na ito: https://www.e-tesda.gov.ph/ para makapag-aral ng mga libreng course online.
Magkano ang bayad magkuha ng assestment consumer electronic servicing NC2? Ano ang mga requirements needed?
Good day ma’am & sir, ask ko if ano requirements Kong mag eskwela machining NC 1 thank you.
Good day. Ma ask lang ko tani kay na expire na akon NCII pero wala ko nagamit. Okay lng na if ma schooling ko liwat EIM since expired na ang daan and wala gid nagamit, indi man ma renew kay wala ko work experience, ano dapat himoun sa old certificate ko dayun? Thank you if mahatagan response
Good morning ma’am/sir ask lng ko kung ano ang avail ang Landscape Installation & Maintenance nc2 at ano po ang requirements salamat po
I have completed the free online course of TESDA for CSS I also have the completion certificate however may I ask if you do conduct online NC exams online connected with my course taken?
ma’am/sir,tumatanggap po ba kayo ng ALS passer?sana po masagot po ninyo thanks,
Good morning mam/sir ALS GRADUATE po ako, gusto ko po sana kumuha ng course sa pag wewelding, kailan po pwd mag enroll?
Free po ba inrollment for caregiver?
Greetings maam/sir. I just want to ask if my slot pa for enrollment?
Miss/Sir, good morning. I’m Mayumi Joyce T Panes and I would to follow up my application for applying for Computer System Servicing NCII. Also I would like to inform you that I’ll be changing my currently phone number from 09152919551 to 09673226398.
Thank you so much and good day.
pano mag enrolled ng plumbing?
Hi can I ask po if pwede pa po bang mag enroll po?
Hi! Is your caregiver course open this 2021?
Hi ask ko lang po how to enrolled plumbimg?
hi ma ask lng ko kun May schedule nah sang assessment para sa heavy equipment operator NC II?
Thank You
Hi good day po,
Ask ko lang po how to enrolled driving course po.. as an Ofw..
naay training sa carpentry sa talisay? please reply
Good Eve Po Maam and Sir ask ko lng po kung kailan po avail ung enrollment para SMAW I po? maraming salamat po
May i ask that there is a barista training there?
Good day! Ask ko po sana kung saan may plumbing NCII nag offer dito banda sa negros occidental.thank you po!
Good day ma’am enquir ko lng nus ah enrollment nya sa culinary arts course
May available b na driving nc2 this december?
Hi! may barista kamu na course sir??
Tanong ko lang po how much po ang training per head for Operator/Driver and if there minimum person po ba? thanks
IS YOUR AUTO COURSE IS THE SAME WITH CAD CAM OPERATOR?
Kalan po ulit mg kakaron Ng assessment pra PO nc2
Hi Maam /Sir ,
I am interested to take NC2 driving/offensive ..whats the reqs..and how many days training for the whole course, when will be the start of the training?
Sir, mangkut ko tani kung may ara kamo barista?
Up
kailan po yung enrollment ng carpentry?
Sir San o ang enrollment ng automotive nc1 kg PD nxa daun mkarekta nc2 kng matapus ang nc1???salamat
Hello, madam ask Lang ko Kong asa dapit ang TSDA SA TALISAY
Good day.maam inquire ako ng massage therapy kung mag kano ang at ilan buan ang training at kilan mag start???
Magkano po tuition ng commercial cooking, at driving NC 2?
san o enrollment sang massage therapy mam/sir?
Kailan po inrolment nyo po dito salamat
Hello po . magkano tuition sa Computer hardware servicing NC ll . At sa (SMAW) ??
Ask lang po schedule ng plumbing nc II, meron po ba this week or next month? Scholarship po ba?
Magkano po ang Sa heavy n mounted crane operator.at kailan mag umpisa.
Hi good day! Just want to inquire about assessment for mobile crane operator if do u have this? And when is the exact schedule for assessment? Hope to hear from you asap.
Thank you
What if the student is not a highschool graduate and undergone only a 4yrs highschool,is it possible that she can proceed to TESDA?
maam/sir pede po ba aply ng assessor for machining nc2