Provincial Training Center Agusan del Norte (CABADBARAN) is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Provincial Training Center Agusan del Norte (CABADBARAN)
Address: Government Center, Cabadbaran, Agusan del Norte, Philippines
Telephone Number: (085) 818-5239 / 343-0292
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in this TESDA Training Center in Agusan Del Norte.
| List of Tesda Courses Offered / Registered Programs | Duration |
|---|---|
| Shielded Metal Arc Welding (SMAW) NC II | 304 hours |
| Cookery NC II | 316 hours |
| Shielded Metal Arc Welding (SMAW) NC I | 268 hours |
| Electrical Installation and Maintenance NC II | 196 hours |
| Bread and Pastry Production NC II | 141 hours |
| Produce Organic Vegetables leading to Organic Agriculture Production NC II | 64 hours |
| Prepare Land for Agricultural Crop Production leading to Agricultural Crops Production NC III | 52 hours |
| Implement Plant Nutrition Program leading to Agricultural Crops Production NC III | 44 hours |
| Control Weeds leading to Agricultural Crops Production NC III | 44 hours |
| Driving NC II | 118 hours |
| Heavy-Equipment Operation (Wheel Loader) NC II | 156 hours |
| Heavy-Equipment Operation [Hydraulic Excavator] NC II | 156 hours |
| Shielded Metal Arc Welding (SMAW) NC II – Mobile Training Program | 268 hours |
| Produce Organic Concoctions and Extracts leading to Organic Agriculture Production NC II | 125 hours |
| Barangay Health Services NC II | 563 hours |
| Process Food by Fermentation and Pickling Leading to Food Processing NC II | 171 hours |
| Contact Tracing Level II | 120 hours |
| “Welding and Electrical Maintenance Technology (Bundled Program in :1. 268-Hour Shielded Metal Arc Welding NC I 2. 268-Hour Shielded Metal Arc Welding NC II 3. 196-Hour Electrical Installation and Maintenance NC II“ | Not Available |
Basic Requirements for TESDA Courses:
- At least 15 years of age
- Copy of NSO Birth Certificate
- Certificate of Good Moral Character from last school attended.
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school at telephone number (085) 818-5239 / 343-0292. You can also visit Provincial Training Center Agusan del Norte (CABADBARAN). The school is located at Government Center, Cabadbaran, Agusan del Norte, Philippines.
Ask lng ko ma’am sir naay sched or slot para sa mag renew ug EIM nc2 this coming january
Please contact or visit the training center for more info
good day po, ask lng ko f naa ba schedule course offer sa cookery NC2 and how to apply? hoping sa reply. thank you.
Please contact or visit the training center for more info
Good day mangutana unta ko ug naa bay inrolment sa deriving NCII
Good day!
Ask lng po kung may slot ba ang EIM NC2?
Please visit the training center for more info
Good morning ma’am/sir when ang enrollment sa hydraulic excavator training? Thank you
good day mam/sir ask lang po ako kung my avilable na driving?
Naa pay dressmaking sa cabadbaran?
Good day sir/ma’am
Naa pamoy available slot sa driving training
Kailan po enrollment for Shielded Metal Arc Welding, SMAW ?
Mam ask lang po Kung pwede pa Po ba Maka kuha NC1 FOR REGGING AT NC2 FOR OPERATING.
taga agusan po ako jabonga, Sana po masagot gusto ko po kumuha NC2 Equipment.
Panu Kong Dili graduate Ng high school, pero ilang years na ga trabaho sa heavy equipment needed paba Ng back ground sa school?
Good day maam/sir unsay e open na course karon na mga days? Salamat sa pag tubag.
Pilay tuition pay sa massage theraphy
good day maam /sir.available pa ang NCII electrical?ask lang ko sir/maam if naa pa slots f pwedi pa mo eskwela?
When ang enrollment for cookery NC II? And pwede ba makaenrol ang undergrad?
Good day ma’am/sir. Available pa ang NCII electrical ? Ask lang ko ma’am/sir if naa pay slots or if okay pa mo skwela?
Good day…aak lang ko kung on going paba ang enrollment sa commercial cooking NC II? Kanus mag start ang class? Ask na lang pud ko pila tuition fee…salamat
naa moy it na training? tas when start sa enrolment?
knos a sogod training ani
Good morning po mangutana tana ko Kung kanus a sugod sa inrollement for programming?
naa bay monthly fee mag training diha labi na welding training… ? pila pod
Kanus’a ang sugod sa enrollment
Good day po. Pwede mag ask if naay tuition fee ang commercial cooking NCII and pila ang tuition fee? Interesado unta ko muapply for a training. Salamat
kanus.a ang graduation for batch feb.17, 2018 ??
kanus,a ang sugod sa enrollment karon nga year sa electrical installation and maintenance?
Pwedi pa maka enroll sa heavy equipment operator
Kanus’a and enrollment karon na year?
naay nc3 electricity sa cabadbaran sir?
Good day sir natad pwede po ba ako humingi ng certificate Tessa na pla ngayon PECI jan yong akin Hindi pa Tessa acridated, pwede po kaya yon? Batch 1997 98 po ako thanks po
I need baking course,please let me know
When will be the next batch of training and how much will it cost?
Naa ba instrumentation nga course deri sa cabadbaran or near place in cbr like butuan or surigao,willing to undergo a training
Kanus-a mag sugod ug enrollment ug kanus-a ra taman? Pm me
Pwede mangutana kng pilay tuition sa cookery og kanus a ang enrollment
commercial cooking ncIII poh meron? magkano?
Naa moi caregiver na courses dnhe ?
Naay moy reciptionist?
Kanus.a ang Sugod sa enrollment?