Monark Foundation San Pedro Laguna Tesda Courses

Monark Foundation San Pedro Laguna is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).

Monark Foundation, Inc. (MFI) was established in 1997 with the vision of providing job opportunities to determined, less-privileged Filipino youth by providing them knowledge, skills and values that will enable them to become responsible citizens, making a difference in society.

Initially offering the course Heavy Equipment Servicing, MFI now also offers Automotive Servicing, Industrial Office Management (for female), and Operator Development Short Courses. In 2004, MFI was recognized as the Center Of Excellence in Autotronics by the Technical Education and Skills Development Authority (TESDA). It was also awarded Best Dual Training Institution-National Level in 2006.

In 2008, MFI launched its Flagship Project, “Technicians for the World” in collaboration with Caterpillar Asia Pacific. Under this project, MFI will produce highly skilled, value-laden technicians for Monark Equipment, other CAT Dealers around the world, as well as its Mining customers. It uses the Caterpillar Apprentice Service Technicians Training (CASTT) Program and applies the Caterpillar Assessment Tools and learning standards to ensure that graduates of the program have the required skills to become Caterpillar technicians.

Monark Foundation San Pedro Laguna

Address: South Expressway cor. Magsaysay Rd., Brgy. San Antonio, San Pedro, Laguna, Philippines
Telephone Number: (02) 869-3946; 637-7021
Website: http://www.monarkfoundation.org

TESDA Approved Programs

Here is the list of available TESDA registered programs and short courses offered in “Monark Foundation San Pedro Laguna” in the province of Laguna.

List of Tesda Courses Offered / Registered Programs

Course Authorized Duration
Automotive Servicing NC I 400 Hours
Heavy Equipment Operation (Bulldozer) NC II 200 Hours
Heavy Equipment Operator (Hydraulic Excavator) NC II 200 Hours
Heavy Equipment Servicing (Mechanical) NC II 1,040 Hours
Heavy Equipment Servicing NC II 886 hours
Industrial Office Management 1,056 hours

Basic Requirements for TESDA Courses:

  • At least 18 years of age
  • At least High School Graduate
  • Copy of NSO Birth Certificate
  • With good moral character
  • Undergone a pre-training assessment
  • Can communicate both orally and in written form

Training Fees and Schedule

The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.

For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.

Location and Contact Information

For further information, please contact the school directly at telephone number (02) 869-3946; 637-7021. You can also visit Monark Foundation San Pedro Laguna. The assessment center is located at South Expressway cor. Magsaysay Rd., Brgy. San Antonio, San Pedro, Laguna, Philippines.


39 Comments

Add a Comment
  1. Good day. I am inquiring on behalf of our company. I would like to ask when is the enrolment for NCII Forklift driving as well as the price per head.

  2. Kailan po start Ng enrollment

  3. ADIN BOLANDO LOON

    Good Day,

    Magkano po NC2 forklift driving?
    thank you

  4. Good morning po madam,sir gusto kopong mag aral ng mechanico sana po maTulungan nyo po ako

  5. Magandang araw po, gusto ko lang po malaman kong tumatanggap pa kayo ng mga student?

  6. have a good day mam/sir.

    panu po maka kuha ng nc2 sa forklift?

    thank you in advance po…

  7. Good day po hm po fees sa training ng Excavator driver at ilang days po

  8. Good day, paki info po paano mag line up para enrollment ng training sa EXCAVATOR, paki email din po sa payment sa training. Salamat

  9. Hi po kilan po start ng enrollment nyu ng heavy equipment operator, tsaka magkano po ang tuition o babyaran kpag nkapasok na po sa foundation nyu.from pangasinan

    Salamat po.

  10. Gd pm po pano po kumuha ng nc2 para sa forklift operator may coe po ako galing abroad for forklift operator.

  11. Pierre Macaraeg Jr

    Meron po ba assesment for heavy equipment mechanic..magkano po bayad..

  12. Hello po interestd po ako mgtraining ng heavy equipmnt..

  13. Eduardo encallado je

    Sir/mam
    Wala po ba age limit sa pag take nang heavy equipment from quezon thnx

  14. Sirs/Ma’ams,meron po kayong trade test para sa reach truck/counter balance at motorized pallet?

  15. Tanong ako lang po ang umpisa inyong Buena nang November po

  16. hi mam / sir, Itatanong ko lang po kung kelan po ang enrollment para sa heavy equipment servicing NCII, kung may age limit ba at kung magkano ang training fee. Salamat po

  17. mgkano po mg pa asses ng nc2 ng forklift operator..

  18. Good Morning po! Do you have any course for forklift operators? And if there is, do you have a course for that matter near Iloilo? Thank you.

  19. Good Morning! Do you have a course for forklift operators?

  20. my training po ba para sa backhoe or crane operator

  21. Info lang po sa heavy equipment bakcho operator

  22. sonny boy martinez

    forklift training po tnx

  23. Maam ask ko lng po avail po ba dto ug training as forklift operator?? Slamt po

  24. good day!
    maam/sir
    kelan po ang enrollment at magkano po ang bayad and ano-ano po yung mga requirments …salamat po
    FROM Mauban Quezon

  25. Hi ask ko lng po kung kelan opening ng training nyo salamat.

  26. Leopoldo Guevarra jr.

    Magandang gabi po..tanung ko lang po kng mgkanu ang bayad sa training ng forklift at anu po ang mga requirment..salamt

  27. Sir/ madam, ask ko lng po kung magkano ang assessment ng heavy equipment servicing(mechanical) NC II?

  28. Good Day Sir/Mam at Monark Training Center… I just would like to inquire kung magkano po ang Tuition fee for Motor Grader po para makakuha po ako ng Certificate at ilang oras po ang training? Sana po’y matugunan ninyo ang aking katanungan..Magandand Araw pong muli sa inyong lahat ng bumubuo ng Monark Training Center..

  29. Good day mam,sir ‘ kelan po pwede mag enroll para sa backhoe loader ? Tsaka gano po katagal ung training??
    Thank u po..

  30. goodmorning po. Ma’am/Sir. tanung ko lng po kung may training kayo sa heavy equipment salamat po!

  31. good evening po.Ma,am/sir. tanung ko lang po kung ilan napo ba ung mga mag e’enroll sa excavator?
    para po makapunta ako jan at maka pag enroll.
    salamat po

  32. good day1 ask ko lang magkano bayad ng training sa forklipt at steamroller para magkaroon ng nc2.tnx

  33. Maam,sir
    San po ang enrollment magaaral po ng heavy equipment porkclift at mgkano po bayad…
    Anu po b mga qualification pra mkpaxuk po jan xa school nyo..
    George rodillo from indang cavite
    09176609271

    1. Good day po mam/sir. Kelan po enrollment for Heavy equipment servicing NC2 (mechanical)

    2. Good day po mam/sir. Kelan po enrollment for Heavy equipment servicing NC2 (mechanical). Anu and po ang mga requirements at magkanu po ung tuition fee??

  34. Kailan po enrollment,at magkano po ang bayad,jerald manalang from pampanga

  35. Kaylan po ung enrollment??
    Nestor from davao

  36. hi po..kailan po start ng enrollment ?from leyte po thank u

  37. Ser,madam,
    Magkano ang bayad sa pag enrol ng Heavy Equipment Servicing NC II may mapapasokan ba pag katapos mag aral jan pra mag ojt

Leave a Reply to Emiliano sulla Cancel reply

Your email address will not be published. Required fields are marked *