Jacobo Z. Gonzales Memorial School of Arts and Trades is an institution accredited by TESDA that offers Technical and Vocational Education and Training Programs (TVET) under the Technical Education and Skills Development Authority (TESDA) and the Commission on Higher Education (CHED).
Jacobo Z. Gonzales Memorial School of Arts and Trades
Address: Brgy. San Antonio, Biñan, Laguna, Philippines
Telephone Number: (049) 511-8059 /511-9409
TESDA Approved Programs
Here is the list of available TESDA registered programs and short courses offered in “Jacobo Z. Gonzales Memorial School of Arts and Trades” in the province of Laguna.
List of Tesda Courses Offered / Registered Programs
| Course Authorized | Duration | Trainer |
|---|---|---|
| Trainers Methodology Level II | 568 hours | Cristeta C. Dacumos Manex T. Sabidong |
| Trainers Methodology Level I | 264 hours | Manex Sabidong |
| Shielded Metal Arc Welding (SMAW) NC II | 1,948 Hours | Rustum S. Romero |
| Shielded Metal Arc Welding (SMAW) NC II | 268 Hours | Erickson Farral |
| Shielded Metal Arc Welding (SMAW) NC I | 463 hours | Divina Fernandez |
| Scaffold Erection NC II | 162 Hours | Marlon A. Ruiz |
| RAC Servicing (DomRAC) NC II | 509 hours | Alvin Saulon |
| PV Systems Installation NC II | 303 hours | Erwin E. Laberinto Johram V. Palconan |
| Pipefitting NC II | 231 hours | Ariel Jueves |
| Organic Agriculture Production NC II | 232 Hours | Caroline De Leon |
| Mechatronics Servicing NC IV | 200 Hours | Edilberto I. Limosinero |
| Mechatronics Servicing NC III | 196 Hours | Edilberto L. Limosinero; Erwin E. Laberinto |
| Mechatronics Servicing NC II | 187 Hours | Johram V. Palconan |
| Mechatronics Servicing NC II | 1,867 hours | Edilberto L. Limosinero |
| Masonry NC II | 287 hours | Angelito G. Urgelles |
| Masonry NC I | 104 hours | Feliciano M. delos Reyes, Jr. |
| Machining NC I (e-TESDA) | 374 Hours | Reynaldo Razon |
| Hilot (Wellness Massage) NC II | 120 Hours | Cecilia Burgos |
| Food and Beverage Services NC II | 385 hours | Jericho Dela Rosa |
| Facilitate eLearning Sessions | 40 hours | Jericho C. Dela Rosa Manex T. Sabidong Reginald E. Clutario Renan K. Gonzales Rochelle L. Gomamis John Abrigo V. Aragones Mark Anthony B. Rapuson Edilberto L. Limosinero |
| English Language | 100 Hours | Teresita Cariño |
| Electronics Products Assembly and Servicing NC II | 267 hours | John Abrigo Aragones |
| Electronics Products Assembly and Servicing NC II | 1,947 hours | Johram V. Palconan |
| Electrical Installation and Maintenance NC II | 269 Hours | Orlando P. Saulon |
| Driving NC II | 118 hours | Casimiro T. Tumanguil |
| Dressmaking NC II | 275 hours | Nenita Pastrano |
| Cookery NC II | 345 hours | Leonida Camua |
| Contact Tracing Level II | 271 hours | Amor D. Kumar |
| Computer Systems Servicing NC II | 287 hours | Jerome Camua |
| Carpentry NC II | 301 hours | Ramgen G. Garcia |
| Bread and Pastry Production NC II | 143 Hours | Elizabeth Laviña |
| Beauty Care NC II | 1,100 hours | Not indicated |
| Barangay Health Services NC II | 463 hours | Myka Johara P. Manzano Amor D. Kumar |
| Automotive Servicing NC II | 705 hours | Casimiro Tumanguil |
| Automotive Servicing NC II | 2,385 hours | Casimiro T. Tumanguil |
| Automotive Servicing NC I | 488 hours | Vic F. Fallaria |
| Community-Based Trainers Methodology Course | 64 hours | Benilda J. Ignacio |
| Process Food by Fermentation and Pickling Leading to Food Processing NC II | 171 hours | Cecilia C. Burgos Teofila S. Delos Reyes |
Basic Requirements for TESDA Courses:
- At least 18 years of age
- At least High School Graduate
- Copy of NSO Birth Certificate
- With good moral character
- Undergone a pre-training assessment
- Can communicate both orally and in written form
Training Fees and Schedule
The cost of training and tuition fees may vary depending upon the specific course of interest and the school offering the training. Training centers also may have slightly different syllabus to teach to students in a class.
For inquiries, tuition fees, enrollment procedures, class schedule and other concern, it would be better that you visit their school/training center and inquire for other documents they may need.
Location and Contact Information
For further information, please contact the school directly at telephone number 511-6133. You can also visit Jacobo Z. Gonzales Memorial School of Arts and Trades. The assessment center is located at Brgy. San Antonio, Biñan, Laguna, Philippines.
mag inquire po sana ko ng automotive nc1 at nc2 meron po bang saturday o Sunday my work kasi koh!
Please contact or visit the training center for more info
Hello, gusto ko Lang po sana malaman kung paano magrenew Ng certificate Ng Massage Therapy NC 11 at Wellness Massage NC 11? Thank you po
Hello,may slot po na for computer system servicing?
Good eve ask ko lan po if yung Basic english po ay all online classes? And how to enroll as a Tesda scholar. Thank you po
Pano po mag renew ng FNB AT BPP NCII???
Please contact or visit the training center for more info
Gusto ko po sana ireport ung sa registrar office kung pano nya ko minaliit sa harapan ng mga kasama ko. Tawagin akong B*B* AT T*NG* at mas maiging magtanim nlang ng talbos ng kamote kesa mag abroad. Honestly speaking dahil sa lumalabas sa bunganga nya mas Non-edukado sya. Dahil lang sa nagkamali ng isang beses may karapatan na syang maliitin pagkatao ko. Gusto ko syang ireport dahil hindi sya nababagay sa ganyang trabaho! Bakla po sya.
Hi po pa ano po ba mg enroll Sa TESDA SMAW NCI
Meron po ba class Saturday and Sunday only for electrical nc2?
Please contact or visit the training center for more info
When po kaya enrollment for Computer System Services? How to enroll?
Gusto ko po sana mag aral ng Electrical installation and maintenance, nag accept naba kayo on this pandemic time, if may mga vaccine na mag aaral pwd na kaya mag under go face to face classes
pwede pa po bang mag enroll
ngayon?
hi Po . pewde po mag tanung ano po yung daldalhin pag kunin yung certificate?
Salamat po.
Meron po ba kayo bread and pastry
pwede pa po ba sa automotive ?
pwede pa po ba sa automotive ?
pwede pa ba sa NCll automotive ?
Pwde po mag apply ng NCII pra forklift driver.?
Hello po,magtatanung po sana kung what are the available schedule of english language?
thank you.
Pwde po mag apply nga NCII pra forklift driver.?
good day day po ask ko kolang po kung open pa yong bread and pastry po. nakapag exam na po ako .di ko po maopen yung link for enrollment,
Good day! Ask ko lang if how much po ang EPAS NC II? after po ng covid when do you start po sa training? weekdays po ba ang pasok?
Hello po kailan po mgstart enrollment for dressmaking?
Then kailan po mgsstart ang klase?
How to enroll and how much po enrollment fee?
meron po bang schedule training for RAC NCI/NCII for this year?
other phone no. aside from 511-6133..
thank you very much
open pa po ba kayo hanggang ngayon? gusto po yung sa housekeeping, pwede po yung ALS graduate?
how much po ba ang ang fees for assessment for SMAW NC II & ELECTRICIAN & MAINTENANCE NC II?
Hi Good Day!
Guys same lang tayo nag inquire dito kung walang sagot dito guys mas ok kung mag ask kayo sa TESDA, tumawag kayo sa Hotline ng Jacobo or mag visit kayo mismo sa Jacobo.
First sa TESDA Main sa Taguig ako nag inquire housekeeping NC II sabi nila meron sa Jacobo Free ang training ng Housekeeping NC II sabi ng TESDA wala daw date ng expiration yung free training ng housekeeping nc ii. Ewan ko lang sa ibang course Kung free mag call na lang kayo sa Jacobo para masagot call ninyo.
Dito kasi mukhang no reply.
HELLO po open kayo this May slots.paba
Meron po ba kayong Microsoft certificate course? Ms-word, Exel , Power point , Internet.
Meron pa po ba slots April po ?
Nag ooffer po ba kayo ng Sunday training
Hi,
May I request details for Mechatronics course
> Training fees
> Schedule
> Is it feasible during weekends?
Hi ! Good Day ,
May I ask po kung meron po ba kayong schedule ng pasok na pang weekend lang po.
English Communication po sana ang course.
Thanks po. Hope you’ll noticed my message and reply me as soon as possible.
thank you so much and God Bless us 🙂
Good Evening po, kelan po ang schedule ng hilot wellness po,?
Hello po. Saan po kayo pwede matawagan? Di ko po macontact yung number niyo. Thank you
Hi Good Day,
I am trying to reach you thru landline number (049) 511 6133 but nobody’s picking up the phone.
Moreover, I would like to inquire if you are conducting an assessment for Transport RAC.
Thank You.
gud pm po ask lang po if available na po ba computer hardware servicing NC ll??
Hi may i know the location san po malapit
May japanese language training po ba kayo ? Magkano po bayad?
Magandang araw po, ask ko lng poh kung kailan po pwede mag enroll sa bread & pastry? 😇
Kailan po ang enrolment
Hi there! Mag rerenew po ako ng Caregiver NC2 atmag eenroll sa Culinary Arts po. Alamin ko po paano ang procedure. May exam pa rin ba or straight enrolment na pi ako. Nag take na rin po ako ng Food Trade noonmay COC na po ako nyan at dressmaking. Kelan po ang next batch ng Culinary Arts?
May enrolment po ba kayo ngayong june? Para po sa English language.
Thanks po sa reply in advance ☺
Hello po, ask ko lang po if on going pa po enrolment nyo? Ngayong June
Kelan po ang enrolment
Gud pm mam/sir my course pp b kau pra s small engine/motorcycle tnxx..
Good Day po.
Ask ko lang po if pwede po ang pasok ng Saturday or Sunday.
Pls. pm po asap.Para po sa Consumer Electronics NC3.
thanks po.
pwede pa po ba mag enroll ang 26 years old
May schedule po ba kayo ng enrollment this april
Kailan open enrollment po ninyu this year, anu requirements po?
kelan po ang start ng enrollment for short coarses for teachers
Ask ko lang po magkano po enrollment fee sa barista course
magandang araw po panu po ba makukuha ang NC III kung graduate ka pa nung 2013?? Salamat po
good day po..inquire po sana ako regarding lsi-english language training..kelan po ang start this year?and paano po ang registration process at mga requirements para po maka-avail ng slot?thanks in advance for your response..
Good pm po mweon po kayo book keeping nc3
Good evening po. Ask ko po kung magkano tuition for Trainers Methodology at ano po ang mga requirements. Thank you so much…
May degree course ba kau?
Hi mam sir good eve po tanung k lng po if kelan po assesment ng automotive nc 1&2
hi mam/sir,, meron po ba kayo japanese language course/program?? thanks in advance.. good day..
Maam/Sir,
Good evening po, ask lang po yung po sa Electrical Installation and Maintenance NCII cousre maam/sir meron po ba pasok ng weekend ( saturday and sunday ) interested po ako na mag inquire sa school niyo. At anu po yung mga requirements maam/sir.
Thanks po and God bless.
Good day, on behalf of our company, United Poplyresins Inc., pioneer in manufacturing plastics (polyresins & polybags) 47 years in the business. We would like inquire where can we coordinate regarding applicants that we can call for our hiring, presently we have vacant position/s for driver/s, maintenance calibrator/s and machine operators. Hope you can help us regarding our recruitment.
Thank you.
Marini C. Ibarra – HR Officer, UNITED POLYRESINS INC.
Ma’am/sir.good day. Where the location of your company?
on going po ba ang enrollment sa tesda?magkanu po ang upon enrollment?
We are currently in need of sewers (high speed)-buuan, how can qe get list of graduates from TESDA Binan on Dressmaking? Kindly help.
Thanks,
Sol
GANO PO KATAGAL ISSUANCE NG TOR?
good afternoon inquire lang po kung pwede pa pong mag enrol for NCII courses na pang sat. and sun. lang po thank you
good afternoon po ask ko lang po kung ano po ang NCII nyo po na tuwing sat. and sun. lang po thank you
Good day bukas Po b office niyo ng Saturday, I want to enroll but weekend is my only free days
For electrical and installation courses me schedule po ba kau ng sabado at linggo kc po me work ako ng monday -friday..
May schedule po ba kayo ng Sunday at magkanu po ang paymeny
May schedule po b kayo ng Sunday.sa air-conditioning po
2mtwag po aq s cell num ngriring pero wla smsgot..
MAM/SIR meron po ba kayong course na Pipe fitter?
Goodafternoon po.ano po ba reQuirements for endrollment.
Gusto kopo sana housekeeping kunin.saka ilan months poba pagaralan ang housekeeping?
Salamat po.
Ask ko lng po kung klan ang start ng classes meron po ba ng june,meron po ba na 1month lng na carpentry nc2 2months lng kc bakasyon ko june to august ty po.
Open po ba kau kapag weekends?
Open na po ba para sa dressmaking?
My open po ba kayong plumbing?
Hi kht 21 k b okay lng then saan po ibang school n merong barista at food and beverages
kailan po start ng english language para po makapunta ako sa office nyo po , gusto ko pong mag aral.
Good ufternun po ,Tanong ko lang po araw araw po ba ang pasok jan? Mayroon po bang hindi araw araw.may traba8ho po kc ako ehh..tanong ko lng po thanks po.
Good ufternun po ,Tanong ko lang po araw araw po ba ang pasok jan? Mayroon po bang hindi araw araw.may trabaho po kc ako ehh..tanong ko lng po thanks po.
good morning po,
magkano po training fee ng massage therapy at hilot wellness massage
tsaka po class schedule,,meron po bang schedule ngayong january?
pls rply po,thank you
Good afternoon po, mag iinquire po sana kung my training po kau ng english communication language ngaun october 2021. Panu po mag enroll thank you po.
Hello,
When ang next schedule ng Bread and Pastry Production and how much?
Thanks.
nxt wik papo! ,., 2pesos per bread
uhm pede po bang pa email kung kelan ang start nang commercial cooking nc 2
and ung fee po at schedule
Hello po ask ko lang po if pasok po ba sa pag bartender kung ang kukunin kong course ay food and beverages service?
Hello po ask ko lang po if pasok po ba sa pag bartender kung ang kukunin kong course ay food and beverages service?
Please check here https://tesdatrainingcourses.com/food-and-beverage-services-nc-ii.html
Good morning po. Ask qulang po Kong pwede pa po bang mag enroll
meron po ba ngayon EIM ncll?
Ano po bang reQuirements for endrollment.. Gusto ko po sana yung dressmaking kunin.. At itatanong ko rin kung pwede rin ba mag endroll yung di nakatpos ng high school?may ksama rin po ako gusto mag endroll sana.. Please pakireply po…thanks
requarements dala lang po kayo ng complete proccess ng 3n1 nescafe clasic ! ok lang yun lang enroll kahit! nd pa nakakapag aral pwede nga 2yr old eh! enrol na
sir maam, my course offer po kau n driving and trooble shooting, at anu days po ang enrollment po tnx.
Hi kailan po start ng ng dress making ? ano po requirements at fee po mgkno ?
HI WHEN WILL BE AN OPENING FOR SWAW NC2
Hi kailan po start ng ng dress making ? ano po requirements at fee po mgkno ?
Bukas ba kau ng sabado
,inquire po sana ako,,anu po availble na schedule kpag mag enroll ng electrical installation NC 11? Merun po bang every saturday lng or sunday kc po may work po ako ng monday to friday,